summaryrefslogtreecommitdiff
path: root/src/til.c
AgeCommit message (Collapse)Author
2023-06-12til: introduce "ref" built-in moduleVito Caputo
This opens up the possibility of referencing contexts on-stream by-path anywhere a module may be used: ref,path=/path/to/existing/context Currently the path lookup is performed @ render time, and a reference is taken on the context found there on the first time it's located. That reference is then held in the ref's context until its context is destroyed. There are more details to flesh out, and what probably needs to happen is some til_stream API for maintaining the reference in the event that the context at that path gets replaced. Due to refcounting, the referenced context will persist even if the stream-resident instance goes away, but there should probably be a way for that replacement to invalidate the existing references so they replace theirs with a fresh lookup at the path... Either way this is a good start. With this addition you can effectively implement scene transitions in rkt, via the mixer module, something like (sans proper escaping): mixer,a_module=ref\,path=/foo/previous/ctxt,b_module=ref\,path=/foo/next/ctxt
2023-06-11til: drop open_memstream() in til_get_module_names()Vito Caputo
open_memstream() isn't implemented by windows (not even mingw)
2023-06-11modules/mixer: add rudimentary mixer meta moduleVito Caputo
this is very early/unfinished, hence experimental flag
2023-06-05til: introduce til_module_create_contexts() variantVito Caputo
checkers::fill_module is presently implemented via creating n_cpus identical module contexts, each having n_cpus=1. Establishing a set of cloned per-cpu contexts, allowing threaded rendering using any fill_module, regardless of if that module internally implements threaded rendering. This works fine, but creates some awkwardness for a future where contexts are registered and discoverable within the stream at their respective setup's path. In the checkers::fill_module case, there would be n_cpus contexts at the same path since they share the same til_setup_t. Those need to be dealt with gracefully, ideally making the clones available to another potentially clone-needing module (imagine a checkers::fill_module transitionining to another checkers::fill_module situation, where the transitioned-to fill_module refers to the context by path, it should get all the contexts out of the stream as-is) In this commit I'm adding a more formalized method of creating multiple contexts from the same set of parameters, in preparation for a future where module contexts get registered on the stream at their til_setup_t.path. By putting the cloned creates behind the til API it should at least be relatively trivial to get the on-stream context registration to capture the multiple contexts.
2023-06-03til,modules/rtv: supply settings to til_module_setup_randomize()Vito Caputo
Rather than creating an orphaned settings instance private to til_module_setup_randomize(), the function now requires the settings instance be provided. The one remaining caller of this function is modules::rtv. Now that rtv is responsible for creating the settings beforehand, and the settings may be created with a path prefix, rtv gets its til_module_context_t->setup.path prefixed for all the channel settings. Another improvement is now the channel settings instance gets created from the module name as the settings string. So while it's not yet possible to sparsely specify settings with others being randomized, at least now when log_channels=on is in effect, the printed args include the top-level channel module. Having proper complete paths for the rtv channel modules is especially visible in --print-paths output FYI. An interesting test for exercising all this is: ``` $ src/rototiller --module=rtv,duration=0,context_duration=0,snow_module=none,channels=all,log_channels=on --print-pipes --defaults --go 2>/tmp/channels in another terminal: $ tail -F /tmp/channels ``` watch the chaos unfold
2023-06-03til: fix spurious empty res_arg in til_module_setup_randomize()Vito Caputo
r variable is checked for zero(success) before writing to *res_arg, but could be left uninitialized (especially in a future scenario where an incoming til_settings_t is fully populated and described).
2023-06-03til_settings: add an optional til_settings_t.prefixVito Caputo
Preparatory commit for bridging the gap separating a baked til_setup_t from a runtime-populated descendant til_settings_t like modules::rtv produces for its channels via til_module_setup_randomize(). For these currently orphaned til_settings_t instances we don't readily have access to the logical ancestor til_settings_t that was used to produce the module_context's bound til_setup_t. But we don't really need the ancestor til_settings_t, all we _really_ want is the ancestral path to prefix the orphan til_settings_t instances. So this commit introduces supplying a prefix which gets prepended to paths printed via the settings instance. A later commit will make use of this in modules::rtv when producing the settings instance passed to til_module_setup_randomize()
2023-06-03til: skip described settings in til_module_setup_randomize()Vito Caputo
Preparatory commit for when settings are supplied by caller, potentially populated and described.
2023-06-03til_settings: drop desc from til_settings_add_value()Vito Caputo
In a world where "describing" settings is an iterative process, especially post-nested-settings which are realized via the desc-applying process, it's better to not even offer desc-setting while adding a new setting. This commit just gets rid of that. The one caller that was passing a non-NULL desc to til_settings_add_value(), til_module_setup_randomize(), was redundantly doing so since the subsequent desc-processing was assigning it again anyways. Future commits will likely change til_module_setup_randomize() use a non-NULL desc for skipping desc-applying, which wouldn't even work if it was always setting the desc @ add time. That becomes necessary for partially randomizing sparsely-populated settings.
2023-06-03til: add exclusions to til_get_module_names()Vito Caputo
There's often a need to exclude specific modules, though it's often a hacky kludge. It's something relied upon currently for preventing dangerous recursion scenarios, which will likely get fixed up more robustly in the future.
2023-06-03til_settings,setup: introduce til_setting_spec_t.override()Vito Caputo
In situations where modules wish to alias setting values like expanding "all" -> "mod0,mod1,mod2,mod3" they need a way to intercept the value-acceptance @ desc-assignment time in the front-end. This optional override() function does just that when present in the spec. The current setting's value is passed to the override, and if what's returned differs from what was passed (by pointer value), then the current value is freed and the override takes its place. The override function is expected to _always_ return non-NULL; either the value provided, or a newly allocated value override. The override function must never free the supplied value, that's the front-end's job in applying the override. The override() must return NULL on errors, which are assumed to be limited to ENOMEM failures.
2023-06-03til: add til_get_module_names() helperVito Caputo
Composite modules that want to provide "all" aliases for modules like rtv have to construct a comma-separated string of all module names, usually filtered by some flags. This helper does just that, but it does add yet another open_memstream() user to revisit when those all get fixed up.
2023-05-30til: s/til_module_randomize_setup/til_module_setup_randomize/Vito Caputo
Mechanical rename just to make this consistent with til_module_setup()/til_module_setup_finalize() I should probably do a cleanup pass throughout the til APIs to standardize on a subject-verb-object or subject-object-verb order... Things have become a little inconsistent organically over time
2023-05-30til,*: pivot to til_setup_t for context pathsVito Caputo
This changes til_setup_t* from optional to required for til_module_context_t creation, while dropping the separate path parameter construction and passing throughout.
2023-05-30til: make til_module_randomize_setup() always produce a setupVito Caputo
Preparatory for required til_setup_t @ til_module_create_context() This basically brings til_module_randomize_setup() inline with til_module_setup_finalize() in that it will still produce a minimal til_setup_t even if there is no til_module_t.setup() method. A future commit will do something about the orphaned til_settings_t within til_module_randomize_setup() to get a full path on the produced setup - which will likely simultaneously bring us into a world where one can influence the randomized settings externally as well. Influenced in the sense of potentialy making some of those settings statically configured while leaving others to be (re)randomized at the time of til_module_randomize_setup() executing.
2023-05-30til: add til_module_setup_finalize() helperVito Caputo
Preparatory commit for til_module_create_context() requiring setups even when there's no til_module_t.setup() method. This helper will produce the minimal til_setup_t in such cases, or hand off the task to til_module_t.setup() when present. Note the need for passing res_setting and res_desc to til_module_t.setup() despite not being a settings-construction scenario. This is because of how modules using nested settings tend to use res_setting for storing the current setting in accessing the nested instance, which must still occur even when just baking the complete setup. It's expected that any composite/meta modules utilizing other modules will use this helper to produce the baked setups, instead of the ad-hoc direct calling of til_module_t.setup() they do presently.
2023-05-30til: find explicitly set experimental modulesVito Caputo
b9123bbb added describing incoming preexisting settings, but the spec's returned values omitted experimental modules. This resulted in breaking the ability to say things like --module=rkt to access the experimental rkt module despite it not showing in the interactive setup list of values. This commit includes experimental modules in the spec's values when being produced for a preexisting, undescribed setting. Restoring one's ability to access experimental modules via the CLI.
2023-05-26til_settings: add til_setting_spec_t.as_labelVito Caputo
Currently settings instances get labels from three sources: 1. explicitly labeled by a root-level til_settings_new() call, like main.c::til_settings_new(NULL, "video", args->video); 2. implicitly labeled in a spec.as_nested_settings w/spec.key 3. positionally labeled in a spec.as_nested_settings w/o spec.key But when constructing setting/desc paths, using strictly these settings instance labels as the "directory name path component" equivalent, leaves something to be desired. Take this hypothetical module setting path for example: /module/layers/[0]/viscosity Strictly using settings instance labels as-is, the above is what you'd get for the drizzle::viscosity setting in something like: --module=compose,layers=drizzle Which is really awkward. What's really desired is more like: /module/compose/layers/[0]/drizzle/viscosity Now one way to achieve that is to just create more settings instances to hold these module names as labels and things would Just Work more or less. But that would be rather annoying and heavyweight, when what's _really_ wanted is a way to turn the first entry's value of a given setting instance into a sort of synthetic directory component in the path. So that's what this commit does. When a spec has .as_label specified, it's saying that path construction should treat this setting's value as if it were a label on a settings instance. But it's special cased to only apply to descs hanging off the first entry of a settings instance, as that's the only scenario we're making use of, and it avoids having to do crazy things like search all the entries for specs w/.as_label set. It feels a bit janky but it does achieve what's needed with little pain/churn.
2023-05-26til: more setup desc handling fixupsVito Caputo
7ff8ef94 switched things to always describe relevant settings, but left some loose ends. Obvious fixups for those
2023-05-26setup,til: assert(desc) if setup_func() wants more settingsVito Caputo
In this "all settings require descs" world, when setup_func forgets to return a res_desc for a setting it wants, we can end up in an infinite loop situation. It's better to abort immediately on the assert to catch such a program error.
2023-05-24til_settings: til_setting_t,til_settings_t get parent pointersVito Caputo
Preparatory for constructing unique paths from a given setting/settings instance by walking up the tree
2023-05-15til: fix til_setup_module() skip-experimental bugVito Caputo
Commit d72e924a introduced skipping experimental modules for the values, but it didn't bring in a new index for storing the values so the offset w/skips was being used to store the values too. This created a sparse set of values for the setup, manifesting as a wonky partial interactive setup for the module that didn't even include the default 0 (rtv) value in the list. Simple fix.
2023-05-11til_module_context: reference setup from module contextVito Caputo
This just does the obvious pulling in of til_setup_t, holding the reference throughout the lifetime of the module context.
2023-05-11til: add setup assert in til_module_create_context()Vito Caputo
If the module has a .setup() method, it should be able to just blindly expect a valid baked setup to come in @ context create. Let's enforce that here, and let the module code providing setup hooks just go forth and access the setup assuming it's at least present and as valid as their setup method produces.
2023-05-11til: teach til_randomize_setup() about nested settingsVito Caputo
This probably needs more work, but it's good enough for now
2023-05-11til_settings: make use of til_setting_desc_t.containerVito Caputo
This commit pivots everything over to using desc->container as the target settings instance when adding settings, as well as actually assigning the settings container @ desc create. Given nothing is actually triggering settings heirarchies yet (no specs set as_nested_settings) this shouldn't actually result in any realized functional difference, yet. The settings pointer being placed in desc->container should be identical to what was getting used before.
2023-05-11til_settings: introduce til_setting_spec_t concept vs. descVito Caputo
For recursive settings the individual setting being described needs to get added to a potentially different settings instance than the one being operated on at the top of the current setup_func phase. The settings instance being passed around for a setup_func to operate on is constified, mainly to try ensure modules don't start directly mucking with the settings. They're supposed to just describe what they want next and iterate back and forth, with the front-end creating the settings from the returned descs however is appropriate, eventually building up the settings to completion. But since it's the setup_func that decides which settings instance is appropriate for containing the setting.. at some point it must associate a settings instance with the desc it's producing, one that is going to be necessarily written to. So here I'm just turning the existing til_setting_desc_t to a "spec", unchanged. And introducing a new til_setting_desc_t embedding the spec, accompanied by a non-const til_settings_t* "container". Now what setup_funcs use to express settings are a spec, otherwise identically to before. Instead of cloning a desc to allocate it for returning to the front-end, the desc is created from a spec with the target settings instance passed in. This turns the desc step where we take a constified settings instance and cast it into a non-const a more formal act of going from spec->desc, binding the spec to a specific settings instance. It will also serve to isolate that hacky cast to a til_settings function, and all the accessors of til_setting_desc_t needing to operate on the containing settings instance can just do so. As of this commit, the container pointer is just sitting in the desc_t but isn't being made use of or even assigned yet. This is just to minimize the amount of churn happening in this otherwise mostly mechanical and sprawling commit. There's also been some small changes surrounding the desc generators and plumbing of the settings instance where there previously wasn't any. It's unclear to me if desc generators will stay desc generators or turn into spec generators. For now those are mostly just used by the drm_fb stuff anyways, modules haven't made use of them, so they can stay a little crufty harmlessly for now.
2023-05-11til_settings: rework setting get/add for bare valuesVito Caputo
The core thing here is rather than turning a bare value into a key as I was doing before - we just leave the bare value as a bare value and its setting must be located positionally via get_value_by_idx since there's no key. Existing callers that used to get_key() positionally now get_value_by_idx() positionally all the same, except it's the value instead of the key. This is mostly done for things like the module or fb name at the front of a settings instance. The impetus for this change is partially just cosmetic/ergonomics, but it's also rather strange for what's really a key-less value to be treated as a value-less key. It was also awkward to talk/reason about on the road to recursive settings where bare values would be supported as a standalone settings instance if properly escaped... This also adds unescaping of keys, and adds a dependency on the somewhat linux-specific open_memstream() which may need changing in the future (see comments).
2023-05-11setup: constify settings passed to setup_funcVito Caputo
setup_func isn't formally defined for libtil, but setup_interactively() defacto establishes it and til_module_t.setup() reflects the same signature and calling convention except with til_settings_t constified. This change makes them all consistent in this regard, but there should probably be a formal typedef added for the function. The reason for constifying this is I don't want setup functions directly manipulating the settings instance. In the case of rototiller::setup_interactively() we ensure the stdio-based interactive setup is always the side doing the manipulation of the settings. For a libtil-user like glimmer, it's slightly different beast with GTK+ in the loop, but by preventing the setup_funcs from messing directly with the settings (instead having to describe what they want done iteratively), the front-end always gets its opportunity to maintain its state while doing the described things. Of course, this is mostly a lie, and within libtil the constified til_settings_t gets cast away to modify it in places. But keeping that limited to within libtil is tolerable IMO. We just don't want to see such casts in module code.
2023-05-10til_settings: label til_settings_t instancesVito Caputo
This adds a mandatory label string to til_setttings_new() and updates call sites accordingly. For now the root-level settings created by main.c are simply named "module" and "video" respectively. Any nested settings creations on behalf of modules will be labeled using the module's name the settings are being created for use with. This might evolve with time, for now it's just a minimum churn kind of decision. I can see it changing such that the top-level settings also become labeled by the module/video driver name rather than the obtuse "module" "video" strings. How these will be leveraged is unclear presently. At the least it'll be nice to have a label for debugging til_settings_t heirarchies once recursive settings support lands. In a sense this is a preparatory commit for that work. But I could see the labels ending up in serialization contents as markup/syntactic sugar just to self-document things as well. There might also be a need to address til_settings_t instances in the settings heirarchy, which may be something like a "label/label/label/label" path style thing - though there'd be a need to deal with name collisions in that approach. I'm just thinking a bit about how knobs will become addressed when those become a real thing. The settings label heirarchy might be the convenient place to name everything in a tree, which knobs could then inherit their parent paths from under which their respective knob labels will reside. For the whole name collision issue there could just be some builtin settings keys for overriding the automatic module name labeling, something like: --module=compose,layers=checkers\,label=first\,fill_module=shapes:checkers\,label=second\,fill_module=shapes would result in: /module/first/shapes /module/second/shapes or in a world where the root settings weren't just named "module" and "video": /compose/first/shapes /compose/second/shapes then if there were knobs under checkers and shapes, say checkers had a "foo" knob and checkers had a "bar" knob, they'd be under .knobs in each directory: /compose/first/.knobs/foo /compose/first/shapes/.knobs/bar /compose/second/.knobs/foo /compose/second/shapes/.knobs/bar something along those lines, and of course if compose had knobs they'd be under /compose/.knobs This is just a brain dump and will surely all change before implemented.
2023-03-13modules/rocket: %s/rocket/rkt/gVito Caputo
It's annoying to have the til module called rocket, and the sync tracker protocol/library called rocket, so let's at least differentiate it in code/comments/textual discussion. Plus this results in shorter module context paths i.e.: /rkt:scene /rkt/compose/drizzle:rain /rkt/compose/drizzle:viscosity /rkt/compose/plato:spin_rate /rkt/compose/plato:orbit_rate vs. /rocket:scene etc... These names are shown in the editor, and they'll tend to be long but let's at least get the root name down to three chars this way. A rename of the files and build system update will come in a subsequent commit
2023-01-21modules/rocket: preliminary rocket moduleVito Caputo
This just stubs out a rocket meta module that renders with another module. Future commits will integrate GNU Rocket here. When recursive settings formally lands you'll be able to nest as much settings content as necessary for the underlying module used, as part of the rocket settings. That should enable describing stuff like complex compose scenarios for rocket to sequence.
2023-01-20til: pass module to .context_create()/til_module_context_new()Vito Caputo
Let's make it so til_module_context_t as returned from til_module_context_new() can immediately be freed via til_module_context_free(). Previously it was only after the context propagated out to til_module_context_create() that it could be freed that way, as that was where the module member was being assigned. With this change, and wiring up the module pointer into til_module_t.create_context() as well for convenient providing to til_module_context_new(), til_module_t.create_context() error paths can easily cleanup via `return til_module_context_free()` But this does require the til_module_t.destroy_context() be able to safely handle partially constructed contexts, since the mid-create failure freeing won't necessarily have all the members initialized. There will probably be some NULL derefs to fix up, but at least the contexts are zero-initialized @ new.
2023-01-11til: omit experimental modules from til_module_setup()Vito Caputo
Don't make experimental modules available to the regular/potentially-interactive setup routine. There should be a flag like --experimental to generally enable these.
2023-01-11* turn til_fb_fragment_t.stream into a discrete parameterVito Caputo
This was mostly done out of convenience at the expense of turning the fragment struct into more of a junk drawer. But properly cleaning up owned stream pipes on context destroy makes the inappropriateness of being part of til_fb_fragment_t glaringly apparent. Now the stream is just a separate thing passed to context create, with a reference kept in the context for use throughout. Cleanup of the owned pipes on the stream supplied to context create is automagic when the context gets destroyed. Note that despite there being a stream in the module context, the stream to use is still supplied to all the rendering family functions (prepare/render/finish) and it's the passed-in stream which should be used by these functions. This is done to support the possibility of switching out the stream frame-to-frame, which may be interesting. Imagine doing things like a latent stream and a future stream and switching between them on the fly for instance. If there's a sequencing composite module, it could flip between multiple sets of tracks or jump around multiple streams with the visuals immediately flipping accordingly. This should fix the --print-pipes crashing issues caused by lack of cleanup when contexts were removed (like rtv does so often).
2023-01-10*: introduce paths for module contextsVito Caputo
There needs to be a way to address module context instances by name externally, in a manner complementary to settings and taps. This commit adds a string-based path to til_module_context_t, and modifies til_module_create_context() to accept a parent path which is then concatenated with the name of the module to produce the module instance's new path. The name separator used in the paths is '/' just like filesystem paths, but these paths have no relationship to filesystems or files. The root module context creation in rototiller's main simply passes "" as the parent path, resulting in a "/" root as one would expect. There are some obvious complications introduced here however: - checkers in particular creates a context per cpu, simply using the same seed and setup to try make the contexts identical at the same ticks value. With this commit I'm simply passing the incoming path as the parent for creating those contexts, but it's unclear to me if that will work OK. With an eye towards taps deriving their parent path from the context path, I guess these taps would all get the same parent and hash to the same value despite being duplicated. Maybe it Just Works, but one thing is clear - there won't be any way to address the per-cpu taps as-is. Maybe that's desirable though, there's probably not much use in trying to control the taps at the CPU granularity. - when the recursive settings stuff lands, it should bring along the ability to explicitly name settings blocks. Those names should override the module name in constructing the path. I've noted as such in the code. - these paths probably need to be hashed @ initialization time so there needs to be a hash function added to til, and a hash value accompanying the name in the module context. It'd be dumb to keep recomputing the hash when these paths get used for hash table lookups multiple times per frame... there's probably more I'm forgetting right now, but this seems like a good first step. fixup root path
2022-09-04modules/strobe: add rudimentary strobe light moduleVito Caputo
After reading about the Dreamachine[0], I wanted to experience this phenomenon. The javascript-based web implementations struggled to hold a steady 10Hz rate and would flicker like crazy, so here we are. Only setting right now is period=float_seconds, defaults to .1 for 10Hz. One limitation in the current implementation is when the frame rate can't keep up with the period the strobe will just stick on without ever going off, because the period will always be expired. There should probably be a setting to force turning off for at least one frame when it can't keep up. [0] https://en.wikipedia.org/wiki/Dreamachine
2022-09-04til: fixup til_fb_fragment_t.texture fragmentingVito Caputo
Until now when fragmenting with a texture present the texture pointer was simply copied through to the new logical fragment. The problem with that is when sampling pixels from the texture in a nested frame scenario, the locations didn't align with the placement of the logical fragment. With this change when the incoming fragment has a texture, the output fragment gets some uninitialized memory attached in the outgoing fragment's texture pointer. Then the fragmenter is expected to do the same populating of res_fragment->texture it already did for res_fragment, just relative to fragment->texture->{buf,stride,pitch} etc. It's a bit hairy/janky because til_fb_fragment_t.texture is just a pointer to another til_fb_fragment_t. So the ephemeral/logical fragments fragmenting/tiling produces which tend to just be sitting on the stack need to get another til_fb_fragment_t instance somewhere and made available at the ephemeral til_fb_fragment_t's .texture member. We don't want to be allocating and freeing these things constantly, so for now I'm just ad-hoc stowing the pointer of an adjacent on-stack texture fragment in the .texture member when the incoming fragment has a texture. But this is gross because the rest of the fragment contents don't get initialized _at_all_, and currently if the incoming fragment has no texture the res_fragment->texture member isn't even initialized. The fragmenters aren't really supposed to be expecting anything sensible in *res_fragment, but now we're making use of res_fragment->texture *if* fragment->texture is set. This is just gross. So there's a bunch of asserts sprinkled around to help police this fragility for now, but if someone writes new fragmenters there's a good chance this will trip them up.
2022-08-07til: til_fb_fragment_t **fragment_ptr all the thingsVito Caputo
Preparatory commit for enabling cloneable/swappable fragments There's an outstanding issue with the til_fb_page_t submission, see comments. Doesn't matter for now since cloning doesn't happen yet, but will need to be addressed before they do.
2022-07-21til: simplify and clarify module_render_fragment()Vito Caputo
This consolidates the prepare_frame+render_fragment potentially-threaded branch but more importantly introduces some asserts codifying the whole prepare_frame() must return a fragmenter /and/ be accompanied by a render_fragment(). Any single-threaded modules are expected to just populate render_fragment() and leave prepare_frame() unused.
2022-07-18til: wire seed up to til randomizersVito Caputo
til_setting_desc_t.random() and til_module_randomize_setup() now take seeds. Note they are not taking a pointer to a shared seed, but instead receive the seed by value. If a caller wishes the seed to evolve on every invocation into these functions, it should simply insert a rand_r(&seed) in producing the supplied seed value. Within a given randomizer, the seed evolves when appropriate. But isolating the effects by default seems appropriate, so callers can easily have determinism within their respective scope regardless of how much nested random use occurs.
2022-07-18til_args: add --seed= explicit PRNG seeding supportVito Caputo
This enables reproducible yet pseudo-randomized visuals, at least for the fully procedural modules. The modules that are more simulation-y like sparkler and swarm will still have runtime variations since they are dependent on how much the simulation can run and there's been a lot of sloppiness surrounding delta-t correctness and such. But still, in a general sense, you'll find more or less similar results even when doing randomized things like module=rtv,channels=compose using the same seed value. For the moment it only accepts a hexadecimal value, the leading 0x is optional. e.g. these are all valid: --seed=0xdeadbeef --seed=0xdEAdBeFf --seed=0x (produces 0) --seed=0xff --seed=deadbeef --seed=ff --seed= (produces 0) --seed=0 (produces 0) when you exceed the natural word size of an unsigned int on your host architecture, an overflow error will be returned. there are remaining issues to be fixed surrounding PRNG reproducibility, in that things like til_module_randomize_setup() doesn't currently accept a seed value. However it doesn't even use rand_r() currently, but when it invokes desc->random() the module's random() implementation should be able to use rand_r() and needs to be fed the seed. So that all still needs wiring up to propagate the root seed down everywhere it may be relevant.
2022-06-10til: introduce til_frame_plan_t and .cpu_affinityVito Caputo
modules/checkers w/fill_module=$module requires a consistent mapping of cpu to fragnum since it creates a per-cpu til_module_context_t for the fill_module. The existing implementation for threaded rendering maximizes performance by letting *any* scheduled to run thread advance fragnum atomically and render the acquired fragnum indiscriminately. A side effect of this is any given frame, even rendered by the same module, will have a random mapping of cpus/threads to fragnums. With this change, the simple til_module_t.prepare_frame() API of returning a bare fragmenter function is changed to instead return a "frame plan" in til_frame_plan_t. Right now til_frame_plan_t just contains the same fragmenter as before, but also has a .cpu_affinity member for setting if the frame requires a stable relationship of cpu/thread to fragnum. Setting .cpu_affinity should be avoided if unnecessary, and that is the default if you don't mention .cpu_affinity at all when initializing the plan in the ergonomic manner w/designated initializers. This is because the way .cpu_affinity is implemented will leave threads spinning while they poll for *their* next fragnum using atomic intrinsics. There's probably some room for improvement here, but this is good enough for now to get things working and correct.
2022-06-10til: add ticks to til_module_context_tVito Caputo
Also wire this up to the til_module_context_new() helper and all its callers. This is in preparation for modules doing more correct delta-T derived animation.
2022-06-07modules/moire: implement rudimentary moire moduleVito Caputo
This introduces a very naive unoptimized moire interference pattern module, it's rather slow complete with a sqrtf() per pixel per center.
2022-05-29*: pivot to til_module_context_tVito Caputo
- modules now allocate their contexts using til_module_context_new() instead of [cm]alloc(). - modules simply embed til_module_context_t at the start of their respective private context structs, if they do anything with contexts - modules that do nothing with contexts (lack a create_context() method), will now *always* get a til_module_context_t supplied to their other methods regardless of their create_context() presence. So even if you don't have a create_context(), your prepare_frame() and/or render_fragment() methods can still access seed and n_cpus from within the til_module_context_t passed in as context, *always*. - modules that *do* have a create_context() method, implying they have their own private context type, will have to cast the til_module_context_t supplied to the other methods to their private context type. By embedding the til_module_context_t at the *start* of their private context struct, a simple cast is all that's needed. If it's placed somewhere else, more annoying container_of() style macros are needed - this is strongly discouraged, just put it at the start of struct. - til_module_create_context() now takes n_cpus, which may be set to 0 for automatically assigning the number of threads in its place. Any non-zero value is treated as an explicit n_cpus, primarily intended for setting it to 1 for single-threaded contexts necessary when embedded within an already-threaded composite module. - modules like montage which open-coded a single-threaded render are now using the same til_module_render_fragment() as everything else, since til_module_create_context() is accepting n_cpus. - til_module_create_context() now produces a real type, not void *, that is til_module_context_t *. All the other module context functions now operate on this type, and since til_module_context_t.module tracks the module this context relates to, those functions no longer require both the module and context be passed in. This is especially helpful for compositing modules which do a lot of module context creation and destruction; the module handle is now only needed to create the contexts. Everything else operating on that context only needs the single context pointer, not module+context pairs, which was unnecessarily annoying. - if your module's context can be destroyed with a simple free(), without any deeper knowledge or freeing of nested pointers, you can now simply omit destroy_context() altogether. When destroy_context() is missing, til_module_context_free() will automatically use libc's free() on the pointer returned from your create_context() (or on the pointer that was automatically created if you omitted create_context() too, for the bare til_module_context_t that got created on your behalf anyways). For the most part, these changes don't affect module creation. In some ways this eases module creation by making it more convenient access seed and n_cpus if you had no further requirement for a context struct. In other ways it's slightly annoying to have to do type-casts when you're working with your own context type, since before it was all void* and didn't require casts when assigning to your typed context variables. The elimination for requiring a destroy_context() method in simple free() of private context scenarios removes some boilerplate in simple cases. I think it's a wash for module writers, or maybe a slight win for the simple cases.
2022-05-23til: simplify fragment->cleared maintenanceVito Caputo
Just assume a fragment has been logically cleared after til_module_render() has done all its potential steps. I'm not certain this doesn't break some existing assumptions WRT fragmented/threaded clears and their propagation out to the outer frame. But I've been operating under the assumption that this was already happening in terms of an implicit setting of til_fb_fragment_t.cleared after a module's render happened. Except I don't see anything in the existing code or history actually doing that, which is odd. For modules that don't invoke til_fb_fragment_clear() explicitly because they are frame-fillers (think submit, swab, ray, julia, plasma, these are all full-frame renders that don't benefit from pre-clearing), they weren't leaving fragment->cleared set, despite having fully initialized the frame's contents. We should be able to just assume after prepare/render/finish has happened for a given module, the target fragment has been cleared. Commit 4e5286 had introduced somewhat complicated .cleared maintenance and propagation for threaded renders, but when we just treat all finished module renders into a given fragment as logically clearing the fragment we can just skip all that.
2022-05-21til: supply a seed to til_module_t.create_context()Vito Caputo
In the recent surge of ADD-style rtv+compose focused development, a bunch of modules were changed to randomize initial states at context_create() so they wouldn't be so repetitive. But the way this was done in a way that made it impossible to suppress the randomized initial state, which sometimes may be desirable in compositions. Imagine for instance something like the checkers module, rendering one module in the odd cells, and another module into the even cells. Imagine if these modules are actually the same, but if checkers used one seed for all the odd cells and another seed for all the even cells. If the modules used actually utilized the seed provided, checkers would be able to differentiate the odd from even by seeding them differently even when the modules are the same. This commit is a step in that direction, but rototiller and all the composite modules (rtv,compose,montage) are simply passing rand() as the seeds. Also none of the modules have yet been modified to actually make use of these seeds. Subsequent commits will update modules to seed their pseudo-randomized initial state from the seed value rather than always calling things like rand() themselves.
2022-05-21modules/shapes: add procedural 2D shapes moduleVito Caputo
Mostly for compositing purposes, here will be a corpus of 2D shapes, parameterized/procedurally generated and able to rotate and perhaps have other dynamics added. What shapes are there presently I had started implementing in checkers as "styles", before realizing they really should just be a separate module checkers can call into. Not terribly interesting by itself, but as blinds and checkers demonstrated, these things deliver a lot of value in compositional situations. They're creating the palette to draw from.
2022-05-01til: introduce "blank" built-in moduleVito Caputo
rtv special-cased handling a nil module to mean clear the fragment, and called this "none" But it really makes more sense for rtv to treat "none" as not doing anything at all for its snow_module - not even blanking. And it would be nice to have a consistent way to express a blank module throughout rototiller, so this introduces a concept of built-in modules accessible only via explicit lookup by name which don't get enumerated via til_get_modules(), as they're inherently uninteresting more utility-oriented modules for use by other modules. For now it's only "blank" that constitutes the built-ins list, but expanding this is only a matter of introducing more modules there. Future commits will rework rtv to use "blank" in place of its current "none", and rtv's "none" will be reworked to represent no snow mechanism at all, obviating the need to specify snow_duration=0,snow_module=none required today.
© All Rights Reserved