diff options
Diffstat (limited to 'rMD-exp/doc')
| -rw-r--r-- | rMD-exp/doc/Makefile.am | 2 | ||||
| -rw-r--r-- | rMD-exp/doc/recordmydesktop.1 | 400 |
2 files changed, 402 insertions, 0 deletions
diff --git a/rMD-exp/doc/Makefile.am b/rMD-exp/doc/Makefile.am new file mode 100644 index 0000000..9780b6c --- /dev/null +++ b/rMD-exp/doc/Makefile.am @@ -0,0 +1,2 @@ +man_MANS = recordmydesktop.1 +EXTRA_DIST = $(man_MANS) diff --git a/rMD-exp/doc/recordmydesktop.1 b/rMD-exp/doc/recordmydesktop.1 new file mode 100644 index 0000000..e8cbb6a --- /dev/null +++ b/rMD-exp/doc/recordmydesktop.1 @@ -0,0 +1,400 @@ +.TH "RECORDMYDESKTOP" 1 "13/7/2006" "Linux" + + +.SH NAME +recordMyDesktop \- record desktop sessions to an Ogg\-Theora\-Vorbis file. + + +.SH SYNOPSIS + +.B recordmydesktop +[ +.B +Options +]^ +.B +filename +.br +.br +.SH DESCRIPTION +.PP + recordMyDesktop produces a file(default out.ogg) that contains a video and audio recording +.br +of a linux desktop session. The default behavior of recording is to mark areas that have changed(through libxdamage) +.br +and update the frame. This behavior can be changed (option +.B +\-\-full\-shots +) to produce a more accurate result +.br +or capture windows that do not generate events on change(windows with 3d context or video display) +.br +but this will notably increase the workload. In this case, enabling the +.B +\-\-with\-shared +option is recommended +.br +(by default this option is switched on or off at every frame, according to the size of the area to be aquired). +.br +.br +recordMyDesktop doesn't have a commandline interface. +.br +After startup, it can be controled only through the following signals: +.br +.br +.B +SIGUSR1 +causes the program to pause if it's currently recording, and vice-versa. +.br +.B +SIGTERM +causes normal termination of the recording. +.br +.B +SIGINT +also causes normal termination. +.br +.B +SIGABRT +terminates the program and removes the specified output file. +.br +.br +.br +A typical scenario of recording can be a command as simple as: +.br +.B +~$ recordmydesktop +.br +which will produce a fullscreen recording named out.ogg +.br +while a command like: +.br +.B +~$ recordmydesktop foo.ogg +.br +will write output to foo.ogg +.br +To specify a region for recording you can type this: +.br +.B +~$ recordmydesktop -x X_pos -y Y_pos -width WIDTH -height HEIGHT -o foo.ogg +.br +where X_pos and Y_pos specify the offset in pixels from the upper left +.br +corner of your screen and WIDTH and HEIGHT the size of the window to be recorded(again in pixels). +.br +If the area extends beyond your current resolution, you will be notified appropriately and nothing will happen. +.br +Notice also, that if any option is entered you have to specify the output file with the \-o switch. +.br +.br +.B +To normally end a recording you can press ctl-c. +.br +(which will send a +.B +SIGINT +to the program). +.br +.br +For further manipulation of the end result look at the +.B +OPTIONS +and +.B +NOTES +sections. +.br +.br +.br +.SH EXIT STATUS +0 is success +.br +Non-zero means an error occurred, which is printed in stderr. +.br +.br +The following error codes indicate the nature of the error: +.br +1 Error while parsing the arguments. +.br +2 Initializing the encoder failed(either vorbis or theora). +.br +3 Could not open/configure sound card. +.br +4 Xdamage extension not present. +.br +5 Shared memory extension not present. +.br +6 Xfixes extension not present. +.br +7 XInitThreads failed. +.br +8 No $DISPLAY environment variable and none specified as argument. +.br +9 Cannot connect to Xserver. +.br +10 Color depth is not 24bpp. +.br +11 Improper window specification. +.br +12 Cannot attach shared memory to proccess. +.br +13 Cannot open file for writting. +.br +.br +.SH OPTIONS +.PP +.B +Generic Options: +.br +.TP +.B + \-h or \-\-help + Print help summary and exit. +.br +.TP +.B + \-\-version + Print program version and exit. +.br +.PP +.br +.B +Image Options: +.br +.TP +.B + \-windowid id_of_window + id of window to be recorded. +.br +.TP +.B + \-display DISPLAY + Display to connect to. +.br +.TP +.B + \-x X + Offset in x direction. +.br +.TP +.B + \-y Y + Offset in y direction. +.br +.TP +.B + \-width N + Width of recorded window. +.br +.TP +.B + \-height N + Height of recorded window. +.br +.TP +.B +.br +.br +.TP +.B + \-dummy\-cursor color + Draw a dummy cursor, instead of the normal one.Value of color can be "black" or "white". +.br +.TP +.B + \-\-no\-cursor + Disable drawing of the cursor. +.br +.TP +.B + \-\-with\-shared + Enable usage of MIT\-shared memory extension at all times. +.br +.TP +.B + \-\-no\-cond\-shared + Do not use the MIT\-shared memory extension when aquiring large areas. +.br +.TP +.B + \-shared\-threshold n + Threshold over which shared memory is used(default 75). +.br +.TP +.B + \-\-full\-shots + Take full screenshot at every frame(Not recomended!). +.br +.TP +.B + \-\-quick\-subsampling + Do subsampling of the chroma planes by discarding extra pixels. +.br +.TP +.B + \-fps N(number>0.0) + A positive number denoting desired framerate. +.br +.br +.PP +.B +Sound Options: +.br +.TP +.B + \-channels N(number>0) + A positive number denoting desired sound channels in recording. +.br +.TP +.B + \-freq N(number>0) + A positive number denoting desired sound frequency. +.br +.TP +.B + \-device SOUND_DEVICE + Sound device(default hw0:0). +.br +.TP +.B + \-\-nosound + Do not record sound. +.br +.PP +.br +.B +Encoding Options: +.br +.TP +.B + \-v_quality n + A number from 0 to 63 for desired encoded video quality(default 63). +.br +.TP +.B + \-v_bitrate n + A number from 45000 to 2000000 for desired encoded video bitrate(default 45000). +.br +.TP +.B + \-\-drop\-frames + Allow theora encoder to drop frames(this can significantly lower proccessing times). +.br +.TP +.B + \-s_quality n + Desired audio quality(\-1 to 10). +.br +.PP +.br +.B +Misc Options: +.br +.TP +.B + \-delay n[H|h|M|m] + Number of secs(default),minutes or hours before capture starts(number can be float). +.br +.TP +.B + \-\-scshot + Take a bitmap screenshot(default rmdout.bmp) and exit. +.br +.TP +.B + \-scale\-shot N + Factor by which screenshot is scaled down(1<=number<=64,power of 2). +.br +.TP +.B + \-o filename + Name of recorded video(default out.ogg). + + + +.PP +.br +If no other option is specified, filename can be given without the \-o switch. +.br +.br +.SH USAGE +.TP +.B recordmydesktop +.br +[\-h| \-\-help| \-\-version| \-delay n[H|h|M|m]| \-windowid id_of_window| +.br +\-display DISPLAY| \-x X| \-y Y|\-width N| \-height N| \-fps N(number>0)| +.br +\-v_quality n| \-s_quality n| \-v_bitrate n| \-\-no\-framedrop| \-dummy\-cursor color| +.br +\-\-no\-cursor| \-freq N(number>0)| \-channels N(number>0)| \-device SOUND_DEVICE| +.br +\-\-nosound| \-\-with\-shared| \-\-no\-cond\-shared| \-shared\-threshold n| \-\-full\-shots| +.br +\-\-quick\-subsampling| \-\-scshot| \-scale\-shot N| \-o filename]^filename +.br +.br +.br +.SH ENVIRONMENT +.TP +.B +DISPLAY +.br +Display environment variable, specifying X server to connect to. +.br +.SH NOTES +.br + Recording a window using the \-windowid option, doesn't track the window itself, but the region that it covers. +.br +Also when using that option the \-x,\-y,\-width and \-height options are relative to the specified window area. +.br +An easy way to find out the id of a window, is by using the +.B +xwininfo +program. +.br +Running a command like : +.br +.B +xwininfo |grep "Window id:"|sed \-e "s/xwininfo\\:\\ Window id:\\ // ;s/\\ \.*//" +.br +will give you only the id of the window(which should look like this: 0x4800005) +.br +More conviniently you can put all that in the command that launches recordMyDesktop like this: +.br +.B +~$recordmydesktop -windowid $(xwininfo |grep "Window id:"|sed \-e "s/xwininfo\\:\\ Window id:\\ // ;s/\\ \.*//" ) +.br +.br + Also, the lower quality you select on a video recording ( +.B +-v_quality +option), the highest CPU-power that you will need. +.br +So it's always better to start with default values and manipulate the end\-result with another program. +.br +An excellent converter is +.B +ffmpeg2theora +, which despite its name is also a theora to theora converter. +.br +Changing the quality of a recordng with it,can be as simple as : +.br +.B +ffmpeg2theora infile.ogg -v 3 -a 4 -o outfile.ogg +.br +It can even perform resizing on the size of the recording, or change the overall duration. +.br +.br +.SH BUGS +Too resource intensive. +.br +.SH AUTHORS +John Varouhakis(johnvarouhakis@gmail.com) +.br +.SH SEE ALSO +.BR xwininfo(1) +.br +.BR ffmpeg2theora(1) +.br
\ No newline at end of file |