summaryrefslogtreecommitdiff
path: root/src/modules/sparkler/sparkler.c
AgeCommit message (Collapse)Author
2022-04-19*: s/til_fb_fragment_zero/til_fb_fragment_clear/Vito Caputo
Mechanical renaming of "zero" to "clear" throughout for this context.
2022-04-14modules/*: remove srand() initializationsVito Caputo
Just rely on til_init()'s srand() ensuring things are fresh.
2022-04-01modules/*: instantiate and use setupsVito Caputo
Now modules allocate and return an opaque setup pointer in res_setup when they implement a setup method. Defaults are utilized when ${module}_create_context() receives a NULL setup. The default setup used in this case should match the defaults/preferred values emitted by the module's setup method. But performing setup should always be optional, so a NULL setup provided to create_context() is to be expected. No cleanup of these setup instances is currently performed, so it's a small memory leak for now. Since these are opaque and may contain nested references to other allocations, simply using free() somewhere in the frontend is insufficient. There will probably need to be something like a til_module_t.setup_free() method added in the future which modules may assign libc's free() to when appropriate, or their own more elaborate version. Lifecycle for the settings is very simple; the setup method returns an instance, the caller is expected to free it when no longer needed (once free is implemented). The create_context consumer of a given setup must make its own copy of the settings if necessary, and may not keep a reference - it must assume the setup will be freed immediately after create_context() returns. This enables the ability to reuse a setup instance across multiple create_context() calls if desired, one can imagine something like running the same module with the same settings multiple times across multiple displays for instance. If the module has significant entropy the output will differ despite being configured identically... With this commit one may change settings for any of the modules *while* the modules are actively rendering a given context, and the settings should *not* be visible. They should only affect the context they're supplied to.
2022-03-30*: wire up context-specific setup instancesVito Caputo
This is a preparatory commit for cleaning up the existing sloppy global-ish application of settings during the iterative _setup() call sequences. Due to how this has evolved from a very rudimentary thing enjoying many assumptions about there ever only being a single module instance being configured by the settings, there's a lot of weirdness and inconsistency surrounding module setup WRT changes being applied instantaneously to /all/ existing and future context's renderings of a given module vs. requiring a new context be created to realize changes. This commit doesn't actually change any of that, but puts the plumbing in place for the setup methods to allocate and initialize a private struct encapsulating the parsed and validated setup once the settings are complete. This opaque setup pointer will then be provided to the associated create_context() method as the setup pointer. Then the created context can configure itself using the provided setup when non-NULL, or simply use defaults when NULL. A future commit will update the setup methods to allocate and populate their respective setup structs, adding the structs as needed, as well as updating their create_context() methods to utilize those setups. One consequence of these changes when fully realized will be that every setting change will require a new context be created from the changed settings for the change to be realized. For settings appropriately manipulated at runtime the concept of knobs was introduced but never finished. That will have to be finished in the future to enable more immediate/interactive changing of settings-like values appropriate for interactive manipulation
2022-03-19modules/sparkler: clarify BSP-tree setting descsVito Caputo
attempt at making these more clear
2022-03-19*: de-constify til_setting_t throughoutVito Caputo
Now that til_setting_t.desc is not only a thing, but a thing that is intended to be refreshed regularly in the course of things like GUI interactive settings construction, it's not really appropriate to try even act like this these are const anymore.
2022-03-19*: normalize setting description capitalizationsVito Caputo
Always only capitalize the first letter, never capitalize like titles.
2022-03-19*: drop til_module_t.licenseVito Caputo
Originally the thinking was that rototiller modules would become dlopen()ed shared objects, and that it would make sense to let them be licensed differently. At this time only some modules I have written were gplv3, Phil's modules are all gplv2, and I'm not inclined to pivot towards a dlopen model. So this commit drops the license field from til_module_t, relicenses my v3 code to v2, and adds a gplv2 LICENSE file to the source root dir. As of now rototiller+libtil and all its modules are simply gplv2, and anything linking in libtil must use a gplv2 compatible license - the expectation is that you just use gplv2.
2022-03-12til_settings: always describe relevant settingsVito Caputo
The existing iterative *_setup() interface only described settings not found, quietly accepting usable settings already present in the til_settings_t. This worked fine for the existing interactive text setup thing, but it's especially problematic for providing a GUI setup frontend. This commit makes it so the *_setup() methods always describe undescribed settings they recognize, leaving the setup frontend loop calling into the *_setup() methods to both apply the description validation if wanted and actually tie the description to respective setting returned by the _setup() methods as being related to the returned description. A new helper called til_settings_get_and_describe_value() has been introduced primarily for use of module setup methods to simplify this nonsense, replacing the til_settings_get_value() calls and surrounding logic, but retaining the til_setting_desc_t definitions largely verbatim. This also results in discarding of some ad-hoc til_setting_desc_check() calls, now that there's a centralized place where settings become "described" (setup_interactively in the case of rototiller). Now a GUI frontend (like glimmer) would just provide its own setup_interactively() equivalent for constructing its widgets for a given *_setup() method's chain of returned descs. Whereas in the past this wasn't really feasible unless there was never going to be pre-supplied settings. I suspect the til_setting_desc_check() integration into setup_interactively() needs more work, but I think this is good enough for now and I'm out of spare time for the moment.
2021-10-01*: librototiller->libtilVito Caputo
Largely mechanical rename of librototiller -> libtil, but introducing a til_ prefix to all librototiller (now libtil) functions and types where a rototiller prefix was absent. This is just a step towards a more libized librototiller, and til is just a nicer to type/read prefix than rototiller_.
2020-09-11module/sparkler: implement some BSP drawing settingsVito Caputo
This commit adds a few settings for visualizing the octree BSP: show_bsp_leafs (on/off): Draw wireframe cubes around octree leaf nodes show_bsp_leafs_min_depth (0,4,6,8,10): Set minimum octree depth for leaf nodes displayed show_bsp_matches (on/off): Draw lines connecting BSP search matches show_bsp_matches_affected_only (on/off): Limit drawn BSP search matches to only matches actually affected by the simulation The code implementing this stuff is a bit crufty, fb_fragment_t had to be pulled down to the sim ops for example and whether that actually results in drawing occurring during the sim phase depends on the config used and how the particle implementations react to the config... it's just gross. This matters because the caller used to know only the draw phase touched fb_fragment_t, and because of that the fragment was zeroed after sim and before draw in parallel. But now the caller needs to know if the config would make sim do some drawing, and do the fragment zeroing before sim instead, and skip the zero before draw to not lose what sim drew. It's icky, but I'll leave it for now, at least it's isolated to the sparkler.
2020-09-11modules/sparkler: wire up particles_conf_t settingsVito Caputo
These don't actually do anything yet
2020-09-11modules/sparkler: add particles conf parameterVito Caputo
Just stubbed out for now, wanting to restore some octree overlays like the old standalone sparkler had. Those can be wired up to settings so rtv can occasionally show the spatial partition and matched particles.
2020-01-25rototiller: introduce ticks and wire up to modulesVito Caputo
Most modules find themselves wanting some kind of "t" value increasing with time or frames rendered. It's common for them to create and maintain this variable locally, incrementing it with every frame rendered. It may be interesting to introduce a global notion of ticks since rototiller started, and have all modules derive their "t" value from this instead of having their own private versions of it. In future modules and general innovations it seems likely that playing with time, like jumping it forwards and backwards to achieve some visual effects, will be desirable. This isn't applicable to all modules, but for many their entire visible state is derived from their "t" value, making them entirely reversible. This commit doesn't change any modules functionally, it only adds the plumbing to pull a ticks value down to the modules from the core. A ticks offset has also been introduced in preparation for supporting dynamic shifting of the ticks value, though no API is added for doing so yet. It also seems likely an API will be needed for disabling the time-based ticks advancement, with functions for explicitly setting its value. If modules are created for incorporating external sequencers and music coordination, they will almost certainly need to manage the ticks value explicitly. When a sequencer jumps forwards/backwards in the creative process, the module glue responsible will need to keep ticks synchronized with the sequencer/editor tool. Before any of this can happen, we need ticks as a first-class core thing shared by all modules. Future commits will have to modify existing modules to use the ticks appropriately, replacing their bespoke variants.
2019-11-24rototiller: rototiller_fragmenter_t s/num/number/Vito Caputo
Mechanical change removing abbreviation for consistency
2019-11-23rototiller: pass cpu to .render_fragment()Vito Caputo
Mostly mechanical change, though threads.c needed some jiggering to make the logical cpu id available to the worker threads. Now render_fragment() can easily addresss per-cpu data created by create_context().
2019-11-23rototiller: pass num_cpus to .create_context()Vito Caputo
Back in the day, there was no {create,destroy}_context(), so passing num_cpus to just prepare_frame made sense. Modules then would implicitly initialize themselves on the first prepare_frame() call using a static initialized variable. Since then things have been decomposed a bit for more sophisticated (and cleaner) modules. It can be necessary to allocate per-cpu data structures and the natural place to do that is @ create_context(). So this commit wires that up. A later commit will probably have to plumb a "current cpu" identifier into the render_fragment() function. Because a per-cpu data structure isn't particularly useful if you can't easily address it from within your execution context.
2017-09-14fb: s/fb_fragment_divide_single/fb_fragment_slice_single/Vito Caputo
Mechanical cosmetic change
2017-09-14*: use fragment generatorVito Caputo
Rather than laying out all fragments in a frame up-front in ray_module_t.prepare_frame(), return a fragment generator (rototiller_fragmenter_t) which produces the numbered fragment as needed. This removes complexity from the serially-executed prepare_frame() and allows the individual fragments to be computed in parallel by the different threads. It also eliminates the need for a fragments array in the rototiller_frame_t, indeed rototiller_frame_t is eliminated altogether.
2017-04-27sparkler: enable rudimentary threaded renderingVito Caputo
This moves most of the particle system maintenance into the serially executed sparkler_prepare_frame(), divides the frame into ncpus fragments, and leaves the draw to occur concurrently. The drawing must still currently process all particles and simply skips drawing those falling outside the fragment. Moving more of the computation out of prepare_frame() and into render_fragment() is left for future improvements, as it's a bit complex to do gainfully.
2017-04-26sparkler: utilize context struct for module stateVito Caputo
2017-04-22*: add module context machineryVito Caputo
introduces create_context() and destroy_context() methods, and adds a 'void *context' first parameter to the module methods. If a module doesn't supply create_context() then NULL is simply passed around as the context, so trivial modules can continue to only implement render_fragment(). A subsequent commit will update the modules to encapsulate their global state in module-specific contexts.
2017-04-22*: /render/render_fragment/ in rototiller_module_tVito Caputo
Adding more context to the name in anticipation of adding a prepare_frame() method to the module struct.
2017-04-21*: s/renderer/module/gVito Caputo
Make consistent with the source directory structure naming.
2017-02-03*: use fb_fragment_zero() instead of memset()Vito Caputo
2017-01-18*: move source into src/ subdirVito Caputo
Restoring some organizational sanity since adopting autotools.
© All Rights Reserved