| Age | Commit message (Collapse) | Author |
|---|
|
Mechanical change of ensuring what little taps are implemented
always get updated @ til_module_t.context_create() time as well
as on every frame.
This ensures the pipes are registered on stream immediately upon
context creation, rather than appearing only once the context
gets rendered the first time.
|
|
Another trivial leak fixup.
|
|
This triggers immediate cleanup of the replaced context.
It's being done after the new context is fully installed as the
replacement, with an eye towards enabling a baton style handoff
of the existing context's owned pipes to the replacement, for
taps they have in common. That's not being done yet, but it'd be
impossible if the gc occurred before creating the replacement,
since the existing context's pipes would already be untapped (and
removed).
|
|
Another trivial leak fixup
|
|
On shutdown til_stream_untap_owner() will call into the pipe_dtor
hook if set. So until now this was just (harmlessly) leaking the
rkt_pipe_t allocated by the pipe_ctor hook on the road to process
exit.
But in the interests of silencing ASAN about leaks on graceful
exit, I'm tying up these loose ends.
This dtor will also be utilized for performing a FORGET_TRACK via
Rocket once that's a thing.
While here I also got rid of the pipe_dtor return value, as it's
unused with no clear potential purpose (for now).
|
|
This is mainly to prevent the mixer's b_module=compose default
from always sending the randomizer down a deep nested compose
scenario.
But it's also just giving the mixer random variety in both a/b
modules, while keeping compose out.
This alone seems to go a long way towards preventing
problematically deep randomized setups under rtv.
|
|
Not bothering with fixing this because rtv needs its channels
setup redone altogether to better resemble something like
rkt::scenes, but allowing partial specification of the settings
as a means of controlling specific settings while randomizing the
rest.
|
|
til_str_appendf() preventing overflows doesn't do much good if we
don't notice the errors and behave appropriately...
|
|
In the wholesale transition to til_module_setup_full() there's
been a lot more problematic randomized setups either extremely
deep or plain infinite.
Due to the primitive escaping mechanism performed by
til_settings_as_arg(), where escape patterns grow exponentially
with depth, it's quite realistic (and observed) for these
problematic setups to exceed SIZE_MAX.
So I'm putting some guard rails in to cap a given til_str_t to
SIZE_MAX. It might make more sense to move the limit well below
SIZE_MAX, but this should at least prevent overflows.
|
|
Typically people do a exponential style growth in such
circumstances, but in my experience that tends to allocate nearly
double what's needed quite often.
Trying just a linearly increasing allocation size that bumps up
the minimum amount every time a resize is triggered. If the
needed amount exceeds the new growth increment, the larger value
is used, but the growth rate still follows the minimum bump.
I expect this to evolve more, just wanted to do something to
speed up til_str a bit from it's naive approach.
|
|
This was prevented before but lost in the shift to
til_module_setup_full() wrappers...
|
|
more cleaning up stuff on exit
|
|
cleanup_channel() is called from rtv_destroy_context(), which
can be called by a gc. The gc isn't reentrant and generally
isn't expecting this, so it breaks in hilarious ways when this
happens, usually ending in a segfault.
gc should probably get some defenses for asserting on reentry...
for now let's just prevent crashing by removing the gc call from
the destroy path.
|
|
b6362c54 introduced shapes_destroy_context() for the radcache,
but didn't actually cleanup the context, oops.
trivial fix
|
|
trivial fix of a trivial leak on teardown
|
|
This gets rid of the rototiller_thread() pthread_cancel() based
exit which seemed to rarely make clang's ASAN
(-fsanitize=address) very angry with a segfault in libc somewhere
Instead of trying to chase that down I'm just getting rid of it,
it's unnecessary.
|
|
This makes it so til_fb_page_get() will return NULL when the fb
has been "halted". If til_fb_page_get() is already waiting for a
page to become available, it will be woken up by til_fb_halt().
Preparatory commit for eliminating the reliance on
pthread_cancel() to terminate rototiller_thread() on shutdown.
Cancellation is always a PITA, especially cross-platform, but in
general it's so easy to have subtle bugs when using it.
|
|
Pages that have been handed out from the inactive list didn't
live on any lists, not until they were submitted.
This commit keeps all pages on a separate list to make cleanup of
outstanding pages in til_fb_free() trivial, which has also been
introduced here.
Just tidying up the shutdown to get rid of a bunch of harmless
leaks, in an effort to make ASAN more useful in detecting real
leaks on graceful exits.
|
|
It's expected that all mondule contexts will have been cleaned up
by the final gc in til_stream_free(). If the gc returns a
non-zero skipped count, it suggests there's a program bug leaking
registered contexts.
|
|
Preparatory commit for making til_stream_free() assert on leaked
module contexts.
|
|
Leaving the larger n_module_contexts on reuse creates the
potential for a NULL ptr dereference in places like gc which
check the refcount of each countext in the set, without testing
for NULL.
Rather than making everything check for NULL, just shrink the
count when it gets reused in a smaller case. This whole reuse
thing is kind of a silly little optimization anyways, and will be
revisited when cloning either happens or the sets become
deprecated.
For now just prevent creating situations that can crash.
|
|
Plug a small leak
|
|
Technically this was leaking contexts but it's only done on the
road to process exit currently anyways.
|
|
Silly bug, these fragmenters need to be revisited in general to
have less copy pasta across the texture fragment and main
fragment.
Easily triggered with:
--seed=0x64daba35 '--module=compose,layers=julia\,checkers\\\,size\\\=:96\\\,pattern\\\=checkered\\\,fill_module\\\=:checkers\\\\\\\,size\\\\\\\=128\\\\\\\,pattern\\\\\\\=checkered\\\\\\\,fill_module\\\\\\\=moire\\\\\\\\\\\\\\\,type\\\\\\\\\\\\\\\=pinwheel\\\\\\\\\\\\\\\,scale\\\\\\\\\\\\\\\=1\\\\\\\\\\\\\\\,pinch\\\\\\\\\\\\\\\=0\\\\\\\\\\\\\\\,points\\\\\\\\\\\\\\\=5\\\\\\\\\\\\\\\,spin\\\\\\\\\\\\\\\=.1\\\\\\\,dynamics\\\\\\\=alternating\\\\\\\,dynamics_rate\\\\\\\=1.0\\\\\\\,fill\\\\\\\=textured\\\\\\\,fill_color\\\\\\\=0xffffff\\\\\\\,clear\\\\\\\=textured\\\\\\\,clear_color\\\\\\\=0x000000\\\,dynamics\\\=alternating\\\,dynamics_rate\\\=1.0\\\,fill\\\=textured\\\,fill_color\\\=0xffffff\\\,clear\\\=textured\\\,clear_color\\\=0x000000,texture=plasma' '--video=sdl,fullscreen=off,size=640x480'
|
|
The existing code wasn't clipping correctly to the right/bottom
edges of the incoming fragment when the xoff/yoff was 0 but
xshift/yshift non-zero. In that case the incoming fragment bound
was unintentionally being enlarged, resulting in an overrun when
the such a cell was filled/cleared.
It was discovered watching montage under rtv, which stumbled
across running checkers w/size=128 on a montage tile of 128x96.
The height/y coords of the single checker cell filling the whole
montage tile weren't getting clamped properly down to the 96-tall
tile.
The shifting for centering checkers introduced some really
annoying arithmetic in this fragmenter.
|
|
Trivial changes to improve some naming / scoping, done while
investigating a bug.
Nothing functionally changed
|
|
This module is here to stay
|
|
Blend is a more accurate word for what's being done.
Fading is something you can achieve with the blend mode, if you
use something like "blank" as one of the modules. But when you
have two modules generating content, it's not a fade, it's just a
blend.
It might make sense in the future to support a "fade" which
assumes a solid color for one module rather than having to use
the "blank" builtin which burns memory bandwidth on a blank
frame.
|
|
Just more largely mechanical changes transitioning ad-hoc nested
module handling over to til_module_setup_full().
|
|
|
|
Now you can seed the scene editing with a top-level serialized
scene in "as_arg" form, just like NEWSCENE.
The current scene being edited is shown in serialized form for
convenient copy & paste into an editor for manipulation, between
the []s both to also show what the default seed will be if you
just press enter. When using the copy & paste w/editor approach,
you'd just paste the tweaked form directly into the waiting
prompt before hitting <enter>.
Regardless of what happens at the initial EDITSCENE prompt, the
current implementation always goes through an interactive
visiting of all the settings. Simply pressing enter at those
individual settings will accept their current value from the
serialized seed, or a default if not present in the settings.
|
|
This doesn't need to be a distinct state since it's basically
just a banner for the start of the newscene process which never
recurs, it's not an interactive prompt or dialog of any kind...
|
|
Running something like:
'--module=checkers,size=64,fill_module=shapes,style=circle --defaults --go'
Would show some artifacts in the top portion of the filled cells
at certain phases of the spining shape. This was introduce by
the radcache, and it's caused by the overhanging tiles on the
perimeter and how their being clipped was carrying into the
radcache contents then used for all subsequent renders.
This commit just makes setting radcache.initialized conditional
on the incoming fragment being a full-frame fragment as a quick
fix. See comment for more info on what to do long-term.
|
|
There's potential for some of the per-cpu fill_module_contexts to
go unused for an entire frame. When this occurs, depending on
the fill_module in use, it can lead to their context's state
diverging.
To mitigate this possibility, add a tidying up pass in
checkers_finish_frame() where such straggler contexts are
identified and forced to render once into a cell-sized waste_fb
of off-screen memory.
This ensures all contexts see all frames/ticks that any
participated in, preserving their clone status across the board.
Prior to this you could see jittering in something like
'--module=checkers,fill_module=roto' as the roto contexts
diverged on the r/rr variables when some didn't get in on the
action of some frames.
See large TODO comment for why this approach is used instead of
something less wasteful of cpu time.
If this approach is kept, it might make sense to do the waste
rendering in parallel. Systems with large numbers of cores could
end up with many stragglers, depending on how many cells there
are vs. cpus. I don't have any such systems so it's difficult to
test any efforts in that vein.
|
|
In compositions where roto recurs in the same frame, it's
wasteful to keep rendering the fill_fb contents manifold for the
same tick. They shouldn't be varying anyways...
It'd be different if the fill_module rendered directly to the
output fragment in an overlay manner, but the current
roto implementation doesn't do that. It's just sampling fill_fb
like a tiled texture sampler would.
The performance hit here is easily observed by doing something
like:
--module='checkers,size=4,fill_module=roto\,fill_module\=moire' --video=mem --defaults --go
Before this change, FPS=1 on my i7 X230. After, FPS=~400.
|
|
Switch to til_module_setup_full() for handling the module setup
of the input {a,b}_module settings
|
|
Switch to til_module_setup_full() for handling the module setup
of the individual layer module settings as well as the texture.
Since compose served as the development mule for adding nested
settings, there was a lot of verbose comments that no longer
seemed necessary since much of the dust has settled.
The separate compose_layer_module_setup() and
compose_texture_module_setup() wrappers feel a bit like
copy-pasta too. I'm tempted to stop using these and just open
code the til_module_setup_full() calls, except they get performed
twice due to the split finalize, so it's probably still a net win
as-is.
|
|
Stupid bug in untested/unused exclusions handling
|
|
Switch to til_module_setup_full() for handling the module setup
of the individual tile module settings.
|
|
Missed one!
|
|
Switch to the generic til_module_setup_full() and rely on the
"none" builtin's NULL res_setup on finalize to indicate when no
fill_module is desired.
This gets rid of the need for a separate til_module_t* handle for
the fill_module, since til_setup_t.creator can be used for that,
and the NULL til_setup_t* to indicate no fill_module.
Basically discards some busy work style code, there's more
cleanups needed surrounding this stuff though.
More or less identical to the previous change to modules/checkers.
|
|
Switch to the generic til_module_setup_full() and rely on the
"none" builtin's NULL res_setup on finalize to indicate when no
fill_module is desired.
This gets rid of the need for a separate til_module_t* handle for
the fill_module, since til_setup_t.creator can be used for that,
and the NULL til_setup_t* to indicate no fill_module.
Basically discards some busy work style code, there's more
cleanups needed surrounding this stuff though.
|
|
This was done for rkt_scener already, this commit brings
interactive setup inline WRT :raw_value overrides on multiple
choice settings.
|
|
Basically everywhere the
TIL_MODULE_HERMETIC|TIL_MODULE_EXPERIMENTAL exclusions were being
applied needed TIL_MODULE_BUILTIN added.
Mostly this is to prevent randomizers from tripping over builtins
in the available modules lists they draw from.
Because builtins aren't visually interesting by themselves, and
in some cases don't currently even have a means of being
randomized properly like ref's path setting.
This wasn't needed previously since builtins were kept off the
modules list altogether. But since 1a6210be that changed and
they must be explicitly filtered by flag instead.
Note I deliberately left the rkt case with just a TODO comment.
It's not a randomizer situation, and it might be acceptable to
let rkt just show everything all the time in the module lists.
That whole situation there is for advanced users.
Also note that without this, rtv et al would easily trigger an
assert on NULL setup due to the "none" builtin. Since there's
still work to be done there in callers properly handling NULL
@res_setup on a successful finalize. But this commit mitigates
that by avoiding the builtins in the randomizers.
|
|
Missed this in the last round of moving things to the
new raw_value() setter/getter api
This snippet of copy-n-pasta the few setup front-ends continue to
have should really be factored out into a libtil helper
|
|
This will just quietly exit successfully if "none" is provided as
the root rendering module.
It's not really a case worth bothering with doing something more
about... the user did this pointless thing on purpose. Let's just
not crash.
While here I may have fixed a bug surrounding til_quiesce() not
being called on the teardown path.
|
|
Sometimes nested modules are optional, in those cases I've
usually been using the "none" module name to indicate this and
the ad-hoc setup stuff can easily bypass module setup on that.
This commit is a step towards having a "none" builtin that
provides a til_module_t.setup() which succeeds but only produces
a NULL res_setup when asked to finalize.
So if callers just handle a successful finalize case that writes
NULL at res_setup equivalent to "disabled", this all Just Works.
Currently that's not an expected thing, but future commits will
bring everything else on the same page.
For callers who want to require the module and not offer "none",
they can just put "none" in the explicit exclusions list passed
to til_module_setup_full().
|
|
Also move builtins to a separate listing while at it
For now this results in the builtins showing up in the modules
list alongside the actual rendering modules. Future work must
refine this UX, maybe by adding some metadata to the spec.values
for categorizing/prioritizing what's shown always vs. what's
present but hidden without asking to be shown hidden stuff or
whatever.
Just consolidating some junk and working towards every nested
module setup going through the same machinery, and always being
able to access the builtins.
|
|
This gets rid of the ad-hoc module lookups previously necessary
for finalizing the nested module setups. Now that the
til_estup_t.creator tracks the creating module, the
rkt_scene_module_setup() wrapper can take care of finalizing.
|
|
Particularly with nested modules it's annoying to have to stow
the module separate from the setup during the setup process.
If the baked setup included the module pointer in the
non-module-specific-setup part of the setup, then nested settings
could finalize using the generic module setup wrapper and just
rely on this til_setup_t.creator pointer to contain the
appropriate module. Which should enable tossing out a bunch of
copy-n-pasta surrounding nested modules setup.
Note this has to be a void* since til_setup_t is a generic thing
used equally by both the fb code and the module code. Hence why
this is called "creator" and not "module", as well as the void*
as opposed to til_module_t*.
Also if rototiller ever grows a sound backend, the setup
machinery will be reused there as well, and it'll be yet another
creator handle that isn't an til_fb_ops_t or a til_module_t.
It's assumed that the callers producing these setups won't be
trying to pass them to the wrong places i.e. a module setup
getting passed to an fb backend and vice versa.
I'm mildly annoyed about having to move the various til_module_t
blocks to above the module's foo_setup(), but it seemed like the
least annoying option. This may be revisited.
|
