summaryrefslogtreecommitdiff
path: root/src/modules
AgeCommit message (Collapse)Author
2023-05-23modules/checkers: fix transposed seed,ticks argumentsVito Caputo
These were being supplied backwards to til_module_context_new(), which mostly just meant the seed always started @ 0 for early checkers contexts, or were just slightly different ticks values for later ones.
2023-05-21modules/shapes: fixup clearing when {letter,pillar}boxedVito Caputo
3b6e34e70 broke this with what looks to be a silly mistake in modifying the existing put_pixel() calls. Kept the fragment->{x,y} instead of removing those and keeping the bare {x,y}.
2023-05-19modules/checkers: also set texture->frame_{width,height}Vito Caputo
These are expected to match, and it's asserted as such in various fragmenters. Especially now that we're getting more exuberant with recursive settings/modules, the correctness of the checkers cells fragment is becoming more exercised/important.
2023-05-17modules/rtv: make hermeticVito Caputo
As-is it's not great for rtv to randomly wind up in compositions, see comment in commit for more context.
2023-05-11modules/rtv: settings-ize snow_module=Vito Caputo
first step towards settings-izing rtv, channels[] remains
2023-05-11modules/compose: settings-ize layers and textureVito Caputo
Now layers= is a settings instance. Each individual setting within that layers instance is also a settings instance of its own. This enables specifying the modules used in the layers as well as settings to be passed into those per-layer modules. The escaping quickly becomes brutal if hand-constructing, but programmatically at least it's workable. Plus, you can let the interactive setup ask you for all the layer settings then just copy and paste the cli invocation printed @ startup (at least with rototiller). texture= is also now a settings instance, which means compose no longer randomizes the texture settings on its own - it instead uses the settings supplied. A consequence of this is that texture settings need to be actually populated if the texture is used. For rtv, which randomizes settings, it makes no difference and rtv compose invocations w/textures will just end up randomizing the texture through the normal setup randomizing machinery. But for direct compose invocations for instance, there's now an actual texture setup process - and if you just use --defaults, the defaults will be applied which is different from before where it would have always been randomized. This area needs some work, like controlling how defaults are applied perhaps in the actual settings syntax such that randomizing can still be performed if desired instead of "preferred" defaults. That's a more general settings syntax problem to investigate
2023-05-11modules/checkers: settings-ize fill_moduleVito Caputo
fill_module= now takes a settings string, so you can specify not just the name of the module, but additional settings passed into that module's setup. The fill_module's context path is also now getting fill_module appended, but see the large comment surrounding that mess WRT checker's per-cpu fill_module context creations.
2023-05-11modules/*: stop storing setup by value in contextsVito Caputo
With setup refcounting and a reference bound to the context, we should just dereference the single instance. The way setups are used it just as a read-only thing to affect context behavior... Note I've left the module-type-specific setup pointer despite it duplicating the setup pointer in the module_context. This is just a convenience thing so the accessors don't have to cast the general til_setup_t* to my_module_setup_t* everywhere.
2023-05-11til_module_context: reference setup from module contextVito Caputo
This just does the obvious pulling in of til_setup_t, holding the reference throughout the lifetime of the module context.
2023-05-11modules/*: remove use of static default setupsVito Caputo
There was a time when it made sense for context creates needing setups but not receiving them to still be functional with some sane defaults. But with recursive settings, we really shouldn't ever have orphaned nested module uses unreachable by a proper setup. So let's just get rid of this fallback, and exclusively rely on the baked setups provided by the .setup() methods. They still have preferred defaults, and the proper setup production machinery is what should be responsible for applying those at runtime where they may also be overridden or otherwise influenced.
2023-05-11modules/rtv: add basic log_channels= settingVito Caputo
This introduces a boolean style log_channels= setting for enabling logging of channel settings on channel switch. It might be nice to change this to accept stdout/stderr/fdnum as the setting instead of always directing at stderr. This also doesn't capture the seed state so it's not exactly logging everything needed to reproduce wholly what is being shown. Some compositions depend more on rand than others, so it matters at varying degrees. It'd be nice for settings syntax to have some global syntax supported where a seed can always be embedded to be loaded. Introducing such things as global settings to the settings syntax is a pending TODO item... right now the only way to load seed state is at startup passed to main as --seed=. That's not gonna cut it long-term. This is an easy big step in the right direction though. Trying to make sense of what's on-screen from the truncated captions is impossible. Even if the captions wrapped the settings, it would be tricky to catch the settings without recording the output or screenshotting. This also immediately makes me wonder about the voting system for rtv where we log settings of favorites... then roll those into playlists.
2023-05-11til_settings: introduce til_setting_spec_t concept vs. descVito Caputo
For recursive settings the individual setting being described needs to get added to a potentially different settings instance than the one being operated on at the top of the current setup_func phase. The settings instance being passed around for a setup_func to operate on is constified, mainly to try ensure modules don't start directly mucking with the settings. They're supposed to just describe what they want next and iterate back and forth, with the front-end creating the settings from the returned descs however is appropriate, eventually building up the settings to completion. But since it's the setup_func that decides which settings instance is appropriate for containing the setting.. at some point it must associate a settings instance with the desc it's producing, one that is going to be necessarily written to. So here I'm just turning the existing til_setting_desc_t to a "spec", unchanged. And introducing a new til_setting_desc_t embedding the spec, accompanied by a non-const til_settings_t* "container". Now what setup_funcs use to express settings are a spec, otherwise identically to before. Instead of cloning a desc to allocate it for returning to the front-end, the desc is created from a spec with the target settings instance passed in. This turns the desc step where we take a constified settings instance and cast it into a non-const a more formal act of going from spec->desc, binding the spec to a specific settings instance. It will also serve to isolate that hacky cast to a til_settings function, and all the accessors of til_setting_desc_t needing to operate on the containing settings instance can just do so. As of this commit, the container pointer is just sitting in the desc_t but isn't being made use of or even assigned yet. This is just to minimize the amount of churn happening in this otherwise mostly mechanical and sprawling commit. There's also been some small changes surrounding the desc generators and plumbing of the settings instance where there previously wasn't any. It's unclear to me if desc generators will stay desc generators or turn into spec generators. For now those are mostly just used by the drm_fb stuff anyways, modules haven't made use of them, so they can stay a little crufty harmlessly for now.
2023-05-09modules/compose: pass n_cpus to layers/texture context createsVito Caputo
Existing code was passing 0 which turns into the number of cores/threads. That's fine when compose isn't running nested in an already threaded render, but falls down in something like checkers w/fill_module=compose since checkers is already threading. But when checkers creates its fill_module context, it's careful to pass 1 for n_cpus to prevent that kind of thing. With this change that no longer falls apart.
2023-03-13modules/rocket: mv modules/rocket modules/rktVito Caputo
Finishes build/fs part of modules/rocket->modules/rkt rename started in previous commit.
2023-03-13modules/rocket: %s/rocket/rkt/gVito Caputo
It's annoying to have the til module called rocket, and the sync tracker protocol/library called rocket, so let's at least differentiate it in code/comments/textual discussion. Plus this results in shorter module context paths i.e.: /rkt:scene /rkt/compose/drizzle:rain /rkt/compose/drizzle:viscosity /rkt/compose/plato:spin_rate /rkt/compose/plato:orbit_rate vs. /rocket:scene etc... These names are shown in the editor, and they'll tend to be long but let's at least get the root name down to three chars this way. A rename of the files and build system update will come in a subsequent commit
2023-02-06modules/meta2d: add some taps for controlling visible bandVito Caputo
There should probably be others for the ball radiuses, and colors
2023-01-22modules/flui2d: add taps for viscosity,diffusion,decayVito Caputo
this needs more work to really be useful... clockstep should be tapped, there should probably be a T tap to control the emitters' cycle im doubtful how useful this module will generally be though. It really needs interactions with other things, like fluid going around pixbounce
2023-01-22modules/drizzle: add taps for viscosity,rainfallVito Caputo
Just some obvious taps... Note the actual usable range for viscosity is quite small, like no greater than .05 really works. There still needs to be some way to describe bounds on the taps, that or normalizing things to always be 0-1 or -1..+1 kind of thing, and expecting the modules or the tap api to map those to the sane ranges. Just leave everything raw for now, wiring up the taps at least opens up experimentation and getting a feel for what makes most sense.
2023-01-22modules/blinds: add taps for T,step,countVito Caputo
Part of me wants to give the blinds arbitrary angle instead of the vert/horiz options. But part of the beauty of blinds is the jaggy-free aliasing-free sharp edges by virtue of always being orthonormal using whole pixels. Maybe in the future there could be a orientation setting where you pick horiz/vert/angular. Then only when angular does it get a theta tap and use angled blinds with anti-aliased imperfect edges...
2023-01-21modules/rocket: implement GNU Rocket integrationVito Caputo
This adds a rudimentary but functional rocket module for sequencing "tapped" variables in rototiller modules according to a timeline via GNU Rocket editors. Currently this only supports a single seq_module= as a setting which will be used for rendering. Any tapped variables present in the nested modules under seq_module will be available for sequencing, and should automatically appear in a connected rocket editor. If you specify connect=off then rocket sync tracks will be read from the filesystem if present. It's a bit clumsy as-is due to how the GNU Rocket library handles this currently. There's a "base" label concept for the virtual rocket device, and the tracks are intended to be files in a directory named using that base= setting. The way you create those track files is by triggering a remote export from the editor while connected. The location of the directory is relative to the cwd of the rototiller process, and you can't specify absolute paths as the base= setting to be explicit about where things go. The setting isn't really a path, as that's not what the library wants it to be. It's an area in need of improvement. In any case, as long as you start with the same base= setting, from the same CWD, as when you did the remote export, you can re-run with connect=off and the exported tracks will be used automagically and things should replay without the editor connected. If you start with connect=on, which is the default, you need to have the editor already running. Otherwise the rocket module will fail @ context create, and you'll get a confusing error about being unable to allocate memory. This is just for now, the context create needs to start returning an errno instead of just the context pointer so the error messages can be more informative now that context create may be doing complicated things like connecting to sockets. Another thing to improve is probably having the module just reconnect periodically if connect=on but it failed @ context create. It could just start anyways and not fail the context create at all there, and just start working once you get the editor online. That'd be a better user experience. This is a good first step regardless...
2023-01-21modules/rocket: preliminary rocket moduleVito Caputo
This just stubs out a rocket meta module that renders with another module. Future commits will integrate GNU Rocket here. When recursive settings formally lands you'll be able to nest as much settings content as necessary for the underlying module used, as part of the rocket settings. That should enable describing stuff like complex compose scenarios for rocket to sequence.
2023-01-21til_stream: add a second void* to til_stream_pipe_tVito Caputo
It seems likely that pipe owners will need not only a way to differentiate themselves via the owner pointer, but also somewhere to register a pipe-specific reference. There probably needs to be a result pointer added for storing the owner_foo when the owner taps, so the owner can make use of it.
2023-01-21til_tap: introduce til_tap_t.ownerVito Caputo
We need a way to identify owners of taps when cleaning up their containing contexts, especially once they're hanging off streams.
2023-01-20til: pass module to .context_create()/til_module_context_new()Vito Caputo
Let's make it so til_module_context_t as returned from til_module_context_new() can immediately be freed via til_module_context_free(). Previously it was only after the context propagated out to til_module_context_create() that it could be freed that way, as that was where the module member was being assigned. With this change, and wiring up the module pointer into til_module_t.create_context() as well for convenient providing to til_module_context_new(), til_module_t.create_context() error paths can easily cleanup via `return til_module_context_free()` But this does require the til_module_t.destroy_context() be able to safely handle partially constructed contexts, since the mid-create failure freeing won't necessarily have all the members initialized. There will probably be some NULL derefs to fix up, but at least the contexts are zero-initialized @ new.
2023-01-12modules/compose: fix segfault introduced by 83e41dVito Caputo
It was assumed (n_modules - n_overlayable) would give the number of non-overlayable modules appropriate as base layers. But with the skipping of hermetic and experimental modules the base_idx could be out of reach leaving layers NULL after the loop, which will segfault later when strlen() assumes it's non-NULL. This commit does the simple thing and also counts the unusable modules to subtract from those eligible for base layers along with n_overlayable.
2023-01-11modules/montage: omit experimental and hermetic modulesVito Caputo
As with the other composite modules, if --experimental happens this will need adjustment to honor it. For now let's just prevent things from breaking when those modules start appearing.
2023-01-11modules/compose: omit experimental and hermetic modulesVito Caputo
This only omits the modules from the random layers Note the texture_values list is enumerated in compose_setup, so there's no corresponding change needed there. It might make sense to change that to a runtime-discovered list though, I think that was done in the pre-flags era.
2023-01-11modules/rtv: skip hermetic/experimental modules for "all"Vito Caputo
This allows explicit listing of such modules as channels, while protecting the automagic/defaults scenario. If there's a future --experimental flag or such added, then the TIL_MODULE_EXPERIMENTAL check will have to become conditional on it.
2023-01-11* turn til_fb_fragment_t.stream into a discrete parameterVito Caputo
This was mostly done out of convenience at the expense of turning the fragment struct into more of a junk drawer. But properly cleaning up owned stream pipes on context destroy makes the inappropriateness of being part of til_fb_fragment_t glaringly apparent. Now the stream is just a separate thing passed to context create, with a reference kept in the context for use throughout. Cleanup of the owned pipes on the stream supplied to context create is automagic when the context gets destroyed. Note that despite there being a stream in the module context, the stream to use is still supplied to all the rendering family functions (prepare/render/finish) and it's the passed-in stream which should be used by these functions. This is done to support the possibility of switching out the stream frame-to-frame, which may be interesting. Imagine doing things like a latent stream and a future stream and switching between them on the fly for instance. If there's a sequencing composite module, it could flip between multiple sets of tracks or jump around multiple streams with the visuals immediately flipping accordingly. This should fix the --print-pipes crashing issues caused by lack of cleanup when contexts were removed (like rtv does so often).
2023-01-11src/modules/{stars,plato}: stream tapped variablesVito Caputo
Now that til_stream_t is implemented, let's wire up the taps. Note that nothing actually creates the stream and puts it in the fragment yet, so stream is still always NULL for these effectively turning this into a NOP.
2023-01-10*: introduce paths for module contextsVito Caputo
There needs to be a way to address module context instances by name externally, in a manner complementary to settings and taps. This commit adds a string-based path to til_module_context_t, and modifies til_module_create_context() to accept a parent path which is then concatenated with the name of the module to produce the module instance's new path. The name separator used in the paths is '/' just like filesystem paths, but these paths have no relationship to filesystems or files. The root module context creation in rototiller's main simply passes "" as the parent path, resulting in a "/" root as one would expect. There are some obvious complications introduced here however: - checkers in particular creates a context per cpu, simply using the same seed and setup to try make the contexts identical at the same ticks value. With this commit I'm simply passing the incoming path as the parent for creating those contexts, but it's unclear to me if that will work OK. With an eye towards taps deriving their parent path from the context path, I guess these taps would all get the same parent and hash to the same value despite being duplicated. Maybe it Just Works, but one thing is clear - there won't be any way to address the per-cpu taps as-is. Maybe that's desirable though, there's probably not much use in trying to control the taps at the CPU granularity. - when the recursive settings stuff lands, it should bring along the ability to explicitly name settings blocks. Those names should override the module name in constructing the path. I've noted as such in the code. - these paths probably need to be hashed @ initialization time so there needs to be a hash function added to til, and a hash value accompanying the name in the module context. It'd be dumb to keep recomputing the hash when these paths get used for hash table lookups multiple times per frame... there's probably more I'm forgetting right now, but this seems like a good first step. fixup root path
2023-01-10modules/stars: add taps for some varsVito Caputo
Wiring up some minimal taps to see how this will work... This only initializes the taps and changes the render to access the rates indirectly via the tapped pointers.
2023-01-10modules/plato: add taps for {spin,orbit}_rate varsVito Caputo
Wiring up some minimal taps to see how this will work... This only initializes the taps and changes the render to access the rates indirectly via the tapped pointers.
2022-11-12modules/compose: more robust texture preservationVito Caputo
The existing code only really cared about preserving the incoming texture on behalf of the caller when the compose code itself was doing something with the texture. But there's scenarios where the underlying module being rendered (or its descendants) might play with the texture, and in such a situation when the outer compose wasn't involving a texture it'd let the descandants installed texture leak out to the callers making the texture apply more than one'd expect. Arguably none of the modules should be missing restoration of the incoming texture after installing+rendering with their own. But with this change in place, compose will clean up after nested modules leaking their texture up.
2022-11-09modules/strobe: force flash even at low FPSPhilip J Freeman
At low framerates, the strobe module timer can expire from frame to frame. This has the effect of appearing "always on." This condition was obscuring output in compose mode. #BirdwalkCommit #WinterStormWarning
2022-09-05modules/roto: move tables init to context createVito Caputo
Mechanical rearrangement, but ultimately there probably needs to be an initialize function added to til_module_t. With all the threading chaos going on, this approach to implicit initialization with a static flag is racy without using atomics. For now it's probably marginally better to do this in context create vs. prepare frame. Context creates *tend* to happen in single-threaded phases of execution, and infrequently. Prepare frame is a serialized phase of the rendering for a given context, but there can be many contexts in-flight simultaneously now with all the forms of compositing happening, sometimes from multiple threads. So that assumption no longer holds...
2022-09-05modules/blinds: use til_ticks_to_rads(ticks)Vito Caputo
This gets rid of the static accumulator hack used for the blinds phase.
2022-09-04modules/strobe: add rudimentary strobe light moduleVito Caputo
After reading about the Dreamachine[0], I wanted to experience this phenomenon. The javascript-based web implementations struggled to hold a steady 10Hz rate and would flicker like crazy, so here we are. Only setting right now is period=float_seconds, defaults to .1 for 10Hz. One limitation in the current implementation is when the frame rate can't keep up with the period the strobe will just stick on without ever going off, because the period will always be expired. There should probably be a setting to force turning off for at least one frame when it can't keep up. [0] https://en.wikipedia.org/wiki/Dreamachine
2022-09-04til: fixup til_fb_fragment_t.texture fragmentingVito Caputo
Until now when fragmenting with a texture present the texture pointer was simply copied through to the new logical fragment. The problem with that is when sampling pixels from the texture in a nested frame scenario, the locations didn't align with the placement of the logical fragment. With this change when the incoming fragment has a texture, the output fragment gets some uninitialized memory attached in the outgoing fragment's texture pointer. Then the fragmenter is expected to do the same populating of res_fragment->texture it already did for res_fragment, just relative to fragment->texture->{buf,stride,pitch} etc. It's a bit hairy/janky because til_fb_fragment_t.texture is just a pointer to another til_fb_fragment_t. So the ephemeral/logical fragments fragmenting/tiling produces which tend to just be sitting on the stack need to get another til_fb_fragment_t instance somewhere and made available at the ephemeral til_fb_fragment_t's .texture member. We don't want to be allocating and freeing these things constantly, so for now I'm just ad-hoc stowing the pointer of an adjacent on-stack texture fragment in the .texture member when the incoming fragment has a texture. But this is gross because the rest of the fragment contents don't get initialized _at_all_, and currently if the incoming fragment has no texture the res_fragment->texture member isn't even initialized. The fragmenters aren't really supposed to be expecting anything sensible in *res_fragment, but now we're making use of res_fragment->texture *if* fragment->texture is set. This is just gross. So there's a bunch of asserts sprinkled around to help police this fragility for now, but if someone writes new fragmenters there's a good chance this will trip them up.
2022-08-11modules/plato: add some rudimentary settingsVito Caputo
Just looking to spice up plato a bit. It seems to make a lot of appearances in rtv, or is just one of those highly visible things when it's participating. Way too monotonous as-is.
2022-08-07modules/compose: add moire as a texture moduleVito Caputo
moire makes for an interesting texture, esp. mixed with itself: --seed=0x62f00a7b --module=compose,layers=julia:moire:drizzle,texture=moire
2022-08-07modules/drizzle: add a mapped overlay styleVito Caputo
this introduces a style= setting with values: style=mask simple alpha mask overlay style=map displacement mapped overlay I might add a lighting option for the style=map mode with a moving light source or something like that, but it's already pretty slow as-is. This is mostly just for more testing of the snapshotting, but there's some interesting compositions enabled like: module=compose,layers=submit:moire:drizzle or just moire:drizzle, when style=map happens.
2022-08-07modules/drizzle: experimenting with the new snapshottingVito Caputo
This arguably doesn't require snapshotting to work, since it's doing a rudimentary in-place single pixel alpha-blended replacement using a single pixel at the same location. But the moment it startus using multiple adjacent super-samples, the snapshot becomes necessary. If it gets further complicated with displacements and maybe bump-mapping or something, then the samples can become quite distant from the pixel being written, spreading out into neighboring fragments being rendered simultaneously etc. These are all cause for snapshotting... For now though it's a very simple implementation that at least makes drizzle overlayable, while also providing a smoke test for the new snapshotting functionality.
2022-08-07til: til_fb_fragment_t **fragment_ptr all the thingsVito Caputo
Preparatory commit for enabling cloneable/swappable fragments There's an outstanding issue with the til_fb_page_t submission, see comments. Doesn't matter for now since cloning doesn't happen yet, but will need to be addressed before they do.
2022-07-24modules/checkers: center unaligned checkers scenariosVito Caputo
This introduces a bespoke fragmenter for checkers. The generic til_fb tiler isn't concerned with aesthetics so it doesn't particularly care if clipped tiles are asymmetrically distributed. It worked fine to get checkers developed and working, but it's really unattractive to have the whole be off-centered when the checkers don't perfectly align with the frame size. There's some gross aspects like leaving the frame_{width,height} to be corrected at render time so render_fragment can access the incoming frame_width for cell state determination.
2022-07-24modules/plato: scale to frame sizeVito Caputo
quick and dirty fixup for proper use as checkers fill_module= note this thing already relies on _checked() put_pixel variant
2022-07-24modules/stars: more fast and nasty fragment clip to frame fixesVito Caputo
s/unchecked/checked/ and use frame dimensions, probably more fixes needed but this prevents crashing as checkers fill_module= at least.
2022-07-24modules/spiro: fast and dirty frame clipping fixupVito Caputo
Sorry but more s/unchecked/checked/ and now this seems to not crash when used as a checkers fill_module.
2022-07-24modules/shapes: fix up clipped fragment/frameVito Caputo
This is a first approximation of correct handling of arbitrarily clipped frames described by the incoming fragment. It's still relying on the _checked() put_pixel variants for clipping. That should probably be improved by constraining the loops to the clipped fragment edges.
2022-07-21modules/{compose,rtv}: s/prepare_frame/render_fragment/Vito Caputo
These modules have been doing their work in prepare_frame(), but aren't actually threaded modules and don't return a frame plan from prepare_frame() nor do they provide a render_fragment() to complement the prepare_frame(). The convention thus far has been that single-threaded modules just provide a render_fragment and by not providing a prepare_frame they will be executed serially. These two modules break the contract in a sense by using prepare_frame() without following up with render_fragment(). I'm not sure why it happened that way, maybe at one time prepare_frame() had access to some things that render_fragment() didn't. In any case, just make these use render_fragment() like any other simple non-threaded module would. This was actually causing a crash when n_cpus=1 because module_render_fragment() was assuming the prepare_frame() branch would include a render_fragment(). It should probably be asserting as such.
© All Rights Reserved