summaryrefslogtreecommitdiff
path: root/src/modules
AgeCommit message (Collapse)Author
2020-09-11modules/rtv: make channels set configurableVito Caputo
This adds a colon-separated channels setting, with a setting of "all" for the existing all-modules behavior. Colon was used since comma is already taken by the settings separator, maybe in the future comma escaping can be added everywhere relevant but for now just keep it simple. The immediate value of this setting is telling rtv to limit itself to a single module, and using its setting randomizer to automatically observe a variety of the available settings in action on a specific module, especially during development. If knobs ever get added in the future I expect this will become even more interesting for watching specific modules under their various settings permutations in combination with their knobs being twisted - especially if rtv reconstructs random signal generator chains for the "knob-twisters" on every channel switch. An immediately interesting TODO complementing this particular change would be optionally preserving module contexts across channel switches, so when the same module is revisited it resumes where it was last seen. But this conflicts with settings changes on channel switching, since contexts should probably always be recreated when settings change - but that's probably a module-specific detail that modules should just be robust enough to tolerate as in they'd safely ignore settings changes without a context recreate, or apply them if they safely can without a context recreate... TODO.
2020-09-11modules/rtv: make durations configurableVito Caputo
This adds three rtv settings: duration, caption_duration, snow_duration
2020-09-11module/sparkler: implement some BSP drawing settingsVito Caputo
This commit adds a few settings for visualizing the octree BSP: show_bsp_leafs (on/off): Draw wireframe cubes around octree leaf nodes show_bsp_leafs_min_depth (0,4,6,8,10): Set minimum octree depth for leaf nodes displayed show_bsp_matches (on/off): Draw lines connecting BSP search matches show_bsp_matches_affected_only (on/off): Limit drawn BSP search matches to only matches actually affected by the simulation The code implementing this stuff is a bit crufty, fb_fragment_t had to be pulled down to the sim ops for example and whether that actually results in drawing occurring during the sim phase depends on the config used and how the particle implementations react to the config... it's just gross. This matters because the caller used to know only the draw phase touched fb_fragment_t, and because of that the fragment was zeroed after sim and before draw in parallel. But now the caller needs to know if the config would make sim do some drawing, and do the fragment zeroing before sim instead, and skip the zero before draw to not lose what sim drew. It's icky, but I'll leave it for now, at least it's isolated to the sparkler.
2020-09-11modules/sparkler: wire up particles_conf_t settingsVito Caputo
These don't actually do anything yet
2020-09-11modules/sparkler: add particles conf parameterVito Caputo
Just stubbed out for now, wanting to restore some octree overlays like the old standalone sparkler had. Those can be wired up to settings so rtv can occasionally show the spatial partition and matched particles.
2020-02-21modules/snow: use rand() on WIN32Vito Caputo
My current version of mingw in debian 9.11 doesn't seem to have rand_r(), so let's just use plain rand() and lose the improved parallelization on win builds.
2020-01-25modules/flui2d: derive r from ticksVito Caputo
Modulo ticks by 2*M_PI to preserve precision by constraining the float to 2*M_PI radians.
2020-01-25rototiller: introduce ticks and wire up to modulesVito Caputo
Most modules find themselves wanting some kind of "t" value increasing with time or frames rendered. It's common for them to create and maintain this variable locally, incrementing it with every frame rendered. It may be interesting to introduce a global notion of ticks since rototiller started, and have all modules derive their "t" value from this instead of having their own private versions of it. In future modules and general innovations it seems likely that playing with time, like jumping it forwards and backwards to achieve some visual effects, will be desirable. This isn't applicable to all modules, but for many their entire visible state is derived from their "t" value, making them entirely reversible. This commit doesn't change any modules functionally, it only adds the plumbing to pull a ticks value down to the modules from the core. A ticks offset has also been introduced in preparation for supporting dynamic shifting of the ticks value, though no API is added for doing so yet. It also seems likely an API will be needed for disabling the time-based ticks advancement, with functions for explicitly setting its value. If modules are created for incorporating external sequencers and music coordination, they will almost certainly need to manage the ticks value explicitly. When a sequencer jumps forwards/backwards in the creative process, the module glue responsible will need to keep ticks synchronized with the sequencer/editor tool. Before any of this can happen, we need ticks as a first-class core thing shared by all modules. Future commits will have to modify existing modules to use the ticks appropriately, replacing their bespoke variants.
2020-01-23stars: mess with the starfieldPhilip J Freeman
This commit adds some fun features to the starfield: - normalize aspect ratio to fragment size - rolling viewport - rotating viewport (with rate option)
2020-01-12libs/ray: decouple film and frame dimensionsVito Caputo
The existing code conflated the rendered frame dimensions with what's essentially the virtual camera's film dimensions. That resulted in a viewing frustum depending on the rendered frame dimensions. Smaller frames (like in the montage module) would show a smaller viewport into the same scene. Now the view into the scene always shows the same viewport in terms of the frustum dimensions for a given combination of focal_length and film_{width,height}. The rendered frame is essentially a sampling of the 2D plane (the virtual film) intersecting the frustum. Nothing is done to try enforce a specific aspect ratio or any such magic. The caller is expected to manage this for now, or just ignore it and let the output be stretched when the aspect ratio of the output doesn't match the virtual film's aspect ratio. In the future it might be interesting to support letter boxing or such things for preserving the film's aspect ratio. For now the ray module just lets things be stretched, with hard-coded film dimensions of something approximately consistent with the past viewport. The ray module could make some effort to fit the hard-coded film dimensions to the runtime aspect ratio for the frame to be rendered, tweaking things as needed but generally preserving the general hard-coded dimensions. Allowing the frustum to be minimally adjusted to fit the circumstances... that might also be worth shoving into libray. Something of a automatic fitting mode for the camera.
2020-01-08modules/flui2d: static-ify flui2d_setup()Vito Caputo
2020-01-08modules/drizzle: add a classic 2D raindrops visVito Caputo
Using the new puddle lib throw some raindrops on the framebuffer
2020-01-06rtv: rework randomized module selectionVito Caputo
Switch to working through the set of modules in a random order, randomizing the order once per cycle. This way no modules get starved for display, which was pretty common in the old method.
2020-01-06stars: fat starsPhilip J Freeman
draw stars as circles that get larger as the approach the camera
2020-01-06spiro: spirograph emulatorPhilip J Freeman
This commit adds a module that emulates a spirograph
2020-01-03montage: bump Y tiles when root has large fractionVito Caputo
Ideally the number of modules can tile without leaving gaps, but as rototiller evolves over time modules are added piecemeal so try accomodate those awkward layouts.
2019-12-30montage: re-enable stars and pixbouncePhilip J Freeman
2019-12-30pixbounce: fix bugs, refactor for resizingPhilip J Freeman
- fix bug for square fragments - use create and destroy context hooks instead of globals - refactor to allow fragment resizing - handle extremely small fragments gracefully
2019-12-30stars: fix bugs, big refactor for resizingPhilip J Freeman
- use a context not globals - use floats and a "unit cube" to simulate the starfield
2019-12-18modules/rtv: remove stale random settings commentVito Caputo
Since 7a77cc1a landed this is no longer true, the .random member will be used to support randomizing non multiple-choice settings.
2019-11-26montage: add (threaded) to descriptionVito Caputo
While the montage doesn't deeply thread the per-tile/module rendering, the per-frame rendering is threaded with a work unit granularity of every module's tile. Meaning every module renders its tile in a single thread, but the tiles are all rendered in parallel. For the most part this works, and will only work better as more modules are added to rototiller increasing the granularity. In the mean time it's a bit coarse and some modules can be a lot more costly to render than others, and there can be a shortage of modules to schedule on idle CPUs. It would be an interesting task to try make each module's tile get subfragmented elastically. I didn't make any attempt to do that, but it might even be worthwhile on hidpi screens where even those small tiles may have a whole lot of pixels, especially on manycore CPUs.
2019-11-25meta2d: add a classic 2D metaballs moduleVito Caputo
2019-11-25din: don't include v3f.h in din.hVito Caputo
This requires a forward declaration of v3f_t and changing din() to take a v3f_t *. The swab module needed updating to supply a pointer type and a v3f_t definition. This is being done so din.h users can have their own v3f implementations. I might consolidate all the duplicated vector code scattered throughout the libs and modules, but for now I'm carrying on with the original intention of having modules be largely self-contained. Though the introduction of libs like ray and din has certainly violated that a bit already.
2019-11-24snow: only create n_cpus fragmentsVito Caputo
Since snow_context_t needs another member anyways, stick n_cpus in there to inform the fragmenter of precisely how many fragments to make. This renderer doesn't benefit from tiling or any such locality, so it uses the slice fragmenter and really only benefits from as many fragments as there are CPUs. Any additional fragments is just wasted fragmenting overhead.
2019-11-24snow: per-cpu rand_r() seed stateVito Caputo
Snow was already threaded, but used a global seed with rand_r() meaning the CPUs were hammering on the same address. There wasn't any locking or atomics, as it isn't terribly critical when generating white noise if the seed access is racy. But the writes still caused cache lines to ping-pong. This commit gives a ~15.5% speedup in my measurements on an i7-2640M. Note without the padded union, using just an array of ints, zero gain is realized. I used a padding of 256 just to have some headroom, x86 is 64 but other CPUs vary, POWER9 is 128 for example.
2019-11-24montage: rework fragmenterVito Caputo
This repurposes the generic fb_fragment_tile_single() to better fit the montage use case. Partially covered areas are simply skipped, and tiles no longer need to be square. In determining the tile width and height, I'm just using the sqrt of the number of modules and dividing the frame width and height. But when the sqrt has a fraction, it's rounded up on the width divide and rounded down on the height divide. So the width gets the extra column of tiles, and the height just throws away the fraction. I think it's OK for now, until someone gets a bug up their ass and wants to avoid having vacant tiles in the bottom right corner when the number of modules doesn't cooperate. One problem with the just skipping partially covered areas is they don't get zeroed out - no fragment is ever generated for them. To fix that there will prolly have to be a fb_fragment_zero() of the frame @ prepare :(. I guess it wouldn't be the end of the world if the fragmenter itself zeroed out skipped regions. It's kind of an ugly layering violation but this is a private montage- specific fragmenter.
2019-11-24montage: rework module skippingVito Caputo
The old approach was just to get things working, it's preferable to not have empty tiles on-screen where modules were skipped and have all tiles be smaller to accomodate vacancies. Now the modules list gets pruned @ context create, so the skipping only happens once and everywhere else is looking at a modules list and count of only the keepers. I also added stars to the skipped modules, for now, since both stars and pixbounce malfunction when the fragment size changes.
2019-11-24montage: zero skipped fragmentsVito Caputo
Not doing this produces especially visible artifacts when shown by rtv.
2019-11-24montage: skip pixbounceVito Caputo
Segfaults were observed when montage came up in rtv, since pixbounce doesn't seem to be rendering properly at all just skip it for now. I suspect what's happening is rtv ran pixbounce before running montage, and pixbounce caches fragment knowledge @ initialization. So when montage ran pixbounce in a tile, that stale fragment knowledge was used and caused scribbling. Stars probably has similar problems actually.
2019-11-24montage: add montage moduleVito Caputo
This is somewhat unfinished as it uses the generic tiled fragmenter that's not interested in appearances but prioritizes total coverage and simplicity. Montage should have its own tiler that can produce non-square and even non-uniform tile dimensions, prioritizing filling the screen with mostly-uniform tiles. But that's a TODO item, this is good enough for now and exercises some fragment details previously irrelevant and often ignored/broken in modules. The pixbounce module in particular seems completely broken with small fragment sizes.
2019-11-24rototiller: rototiller_fragmenter_t s/num/number/Vito Caputo
Mechanical change removing abbreviation for consistency
2019-11-23rototiller: pass cpu to .render_fragment()Vito Caputo
Mostly mechanical change, though threads.c needed some jiggering to make the logical cpu id available to the worker threads. Now render_fragment() can easily addresss per-cpu data created by create_context().
2019-11-23rototiller: pass num_cpus to .create_context()Vito Caputo
Back in the day, there was no {create,destroy}_context(), so passing num_cpus to just prepare_frame made sense. Modules then would implicitly initialize themselves on the first prepare_frame() call using a static initialized variable. Since then things have been decomposed a bit for more sophisticated (and cleaner) modules. It can be necessary to allocate per-cpu data structures and the natural place to do that is @ create_context(). So this commit wires that up. A later commit will probably have to plumb a "current cpu" identifier into the render_fragment() function. Because a per-cpu data structure isn't particularly useful if you can't easily address it from within your execution context.
2019-11-20julia: vary divergent thresholdVito Caputo
This makes the visualization more interesting by adding more variety.
2019-11-20settings: add setting_desc_t.random() methodVito Caputo
To facilitate random setting of these flexible string-oriented settings, support a random helper supplied with the description. This helper would return a valid random string to be used with the respective setting being described. Immediate use case is the rtv module, which also gets fixed up to use it in this commit.
2019-11-19rtv: randomize module settingsVito Caputo
This is just a quick stab at randomizing settings, only multiple choice setings are randomized currently. For modules with settings, a new Settings: field is added to the caption showing the settings as the arguments one would pass to rototiller's module argument.
2019-11-18swab: add a perlin noise visualizationVito Caputo
This maps a different Z-slice through the noise field to each color channel. The slices are moved up and down through the field over time, and the size of the area each color samples is tweaked a bit to make them less coherent with the noise field cells. It could be improved, but I think the output is already neat enough to be worth sharing.
2019-11-16modules/rtv: conslidate time() callsVito Caputo
Consolidate the time() calls in setup_next_module() by using a now variable.
2019-11-16modules/rtv: fix repeat preventionVito Caputo
This broke when snow was added.
2019-11-16modules/rtv: add captionsVito Caputo
The idea is to have captions similar to how MTV did back in the 80s. It'd be nice to make the text resolution independent, but this is a good first stab for an afternoon of tooling around.
2019-11-16sparkler: use chunker in bspVito Caputo
This simplifies the bsp code while addressing cleanup
2019-11-16sparkler: remove assert from chunker_free_chunker()Vito Caputo
This assert prevents using the chunker for efficient freeing, maybe in the future add a flag for toggling this but for now it can just be commented out.
2019-11-16sparkler: plug some memory leaksVito Caputo
particles_free() didn't do all the necessary cleanup. bsp_free() remains mostly unimplemented. I think this wasn't done at the time because I was thinking bsp.c should use the chunker, then cleanup is just a matter of freeing the chunker instead of traversing the bsp.
2019-11-14rtv: add some snow between module switchesVito Caputo
This uses the newly added snow module as a transition between modules
2019-11-14snow: add a simple tv snow / white noise moduleVito Caputo
I wanted to add some noise to the rtv module and figured why not just add a snow module and make rtv pass through it briefly when switching modules. It's not interesting by itself, but as more composite/meta modules like rtv get made it might be handy beyond rtv.
2019-11-14rtv: implement "Rototiller TV" rendererVito Caputo
This is sort of a meta renderer, as it simply renders other modules in its prepare_frame() stage. They're still threaded as the newly public rototiller_module_render() utilizes the threading machinery, it just needs to be called from the serial phase @ prepare_frame(). I'm pretty sure this module will leak memory every time it changes modules, since the existing cleanup paths for the modules hasn't needed to be thorough in the least. So that's something to fix in a later commit, go through all the modules and make sure their destroy_context() entrypoints actually cleans everything up. See the source for some rtv-specific TODOs.
2019-11-13ray: add rudimentary gamma correctionVito Caputo
color banding has been quite visible, and somewhat expected with a direct conversion from the linear float color space to the 8-bit integral rgb color components. A simple lookup table is used here to non-linearly map the values, table generation is taken from Greg Ward's REAL PIXELS gem in Graphics Gems II.
2019-11-10roto: drop roto64, turning roto32 back into rotoVito Caputo
Initially I was going to make 32 vs. 64 be a setting, but decided now that SDL is supported it's fairly likely there will be odd fb dimensions (arbitrary window sizes). Since this never really brought anything of significant value, just drop the version that mostly just demonstrated how to pack multiple pixels into a single u64 write to the framebuffer more than anything else.
2019-11-10submit: replace submit-softly with bilerp settingVito Caputo
This removes the submit-softly module, instead using a runtime setting to toggle bilinear interpolation on the submit module.
2019-11-10build: build contributed pixbounce moduleVito Caputo
© All Rights Reserved