| Age | Commit message (Collapse) | Author |
|---|
|
Now you can seed the scene editing with a top-level serialized
scene in "as_arg" form, just like NEWSCENE.
The current scene being edited is shown in serialized form for
convenient copy & paste into an editor for manipulation, between
the []s both to also show what the default seed will be if you
just press enter. When using the copy & paste w/editor approach,
you'd just paste the tweaked form directly into the waiting
prompt before hitting <enter>.
Regardless of what happens at the initial EDITSCENE prompt, the
current implementation always goes through an interactive
visiting of all the settings. Simply pressing enter at those
individual settings will accept their current value from the
serialized seed, or a default if not present in the settings.
|
|
This doesn't need to be a distinct state since it's basically
just a banner for the start of the newscene process which never
recurs, it's not an interactive prompt or dialog of any kind...
|
|
This gets rid of the ad-hoc module lookups previously necessary
for finalizing the nested module setups. Now that the
til_estup_t.creator tracks the creating module, the
rkt_scene_module_setup() wrapper can take care of finalizing.
|
|
rkt_setup() and rkt_scener_update() had distinct implementations
for scene module setup. This consolidates that where trivial to
both use the new til_module_setup_full() with appropriate
parameters, wrapped up in rkt_scene_module_setup().
The finalizing phase is still ad-hoc which is mildly annoying,
but if finalizing just passed into rkt_scene_module_setup() there
wouldn't be the til_module_t onhand for sticking in rkt_scene_t.
So the code to extract and lookup the module from the settings
would still be needed anyways, as the whole til setup_func api
isn't limited to modules so the baked til_setup_t doesn't come
back with a til_module_t hanging in there. Maybe in the future
this gets changed a bit, there could for instance be a void* in
til_setup_t where something usage-specific goes, like the
relevant module in the case of a module's setup. Something to
consider for the future.
Consolidating these in the pre-finalize phase at least ensures
consistent behavior in initial rkt::scenes setup vs. scener
editing/new scenes.
|
|
When creating nested setting instances, just pass down the full
raw value so if there's any prefix on the value it can be
realized as a prefix for the first entry in the nested instance.
|
|
The application of overrides was still done via ad-hoc value
manipulation. This changes to use til_setting_set_raw_value() in
the obvious manner.
|
|
Trivial refactor s/til_setting_spec_check/til_setting_check_spec/
so it operates on a til_setting_t as opposed to the bare value.
With the containing til_setting_t onhand it can be responsible
for bypassing the check when til_setting_t.nocheck is set.
Adjusted callers in setup_interactively() and rkt_scener_update()
accordingly.
|
|
It's relatively acceptable to use this hammer for the other
errors like ENOMEM especially when this isn't some enterprise-y
service that must endure overload conditions gracefully.
But the setup_finalize() step is rather likely to find invalid
settings, especially now that til_setting_t.nocheck with the ':'
prefix is a thing.
This commit doesn't try resume the setup at the invalid setting
(yet, that will require further til_module_t.setup() method
work), but it at least doesn't rudely disconnect. The user just
gets dumped back to the SCENES state main prompt.
|
|
The existing code assumed til_module_t.name was equivalent to the
name setting's value. That's no longer a safe assumption, and if
the module was made possible via something like nocheck, that
needs to be preserved in the randomized setup.
So this gets the name out of the setting instead, using the new
raw value getter.
|
|
This makes RKT_SCENER_FSM_SEND_NEWSCENE_SETUP* handle ':'
prefixed values correctly, now using the new
til_setting_[sg]et_raw_value() API instead of directly messing
with til_setting_t.value.
It should now be possible to specify anything as a value
regardless of what's in the list for multiple choice settings.
Which does create opportunity for serious breakages... there will
definitely be crashes if you do silly things. Some
til_module_t.setup() methods have historically assumed the
spec_check would police the values reaching them. Those will
have to be made more robust now that this is getting wired up.
|
|
This augments the NEWSCENE_SETUP state to also handle editing
existing settings, which is slightly different but actually
overlaps with the already implemented invalid input stuff.
There's still work to do, and the UX is kind of awkward at best.
But this takes us from having no ability to edit existing scenes,
to being able to actually make edits interactively while it's all
live... with a modicum of interactive guidance via the setup
machinery.
It basically behaves just like creating a new scene, except
instead of the <enter>-accepted "preferred" values, you accept
the existing relevant setting. So as-is, when editing, you have
no shortcut for getting back the "preferred" value for a given
setting. That's been replaced with the existing value for that
setting.
You also get seemingly spurious redundant queries for module
names in things like compose::layers, but they're really not the
same since the first time you get asked it's actually the full
settings string you're getting an opportunity to specify
wholesale, but can accept to seed the layer's settings as-is,
which you will then be given an opportunity to edit piecemeal.
It's that subsequent piecemeal editing of the individual settings
within the nested instance that can feel like a spurious
duplication, especialy when a given layer has just a bare-value
module name and no subsequent settings.. like "plasma". You'd be
asked if you want "plasma" for the layers/[N], then asked if you
want "plasma" _again_ for the layers/[N]/[0] since the module
name is an unnamed setting at position 0 within the layers/[N]
instance.
It was tempting to try streamline that a bit, but there's
actually utility in having an opportunity to paste in a full
settings string for the layers/[N] if you have a serialized scene
onhand you want to dump in there. Then after that, you can juts
smash enter as much as necessary to accept what you pasted in
without editing those in the piecemeal phase. Or, if there was
actually something in what you pasted you did want to change,
change it during that piecemeal phase.
I think it at least kind of works.
|
|
Better spearate the generic error line from surrounding text with
an extra newline
|
|
This was a bit of an aspirational misnomer, editing scenes isn't
actually implemented yet. What the EDITSCENE state currently
implements is the per-scene dialog+prompt, which originally was
going to just be the scene editing flow but became more of a
"view a specified scene's details" with a prompt of its own.
Nothing functionally changes, just mechanical internal renames.
|
|
This is leftover from development when it used a fmt string in
combination with the key, before the desc path was getting
properly appended.
|
|
During rkt_scener development this append was at one time needed,
as there was no retained reference to the scenes_settings for
deriving paths from.
Now that the path is derived from the actual scenes setting
instance it's just resulting in a double trailing /scenes in the
"/module/rkt/scenes/scenes:" heading
Purely cosmetic fix
|
|
Pressing '=' at either prompts now makes scener's current scene
the current Rocket scene.
While you could already do this manually by just looking at the
scenes list for the one with the '*' in the Rocket column while
either watching a production and pressing <enter> repeatedly to
keep refreshing the scenes list... that's cumbersome and
annoying, now just use this shortcut.
Since this just copies Rocket's scene to the Scener scene index,
it needed to properly handle scene 99999... hence the previous
commits.
|
|
While there's no actual context for 99999, it's a state we need
to represent visibly somehow.. so just make it appear like an
epilogue scene off the end.
I've included the Rocket/Scener/Pinned status columns
consistently as well so you at least still get a visible
indication when you've done something like pinned 99999 somehow
(not that this is possible presently, but with future changes
there will be more ways to copy the Rocket idx into Scener's idx)
|
|
This seems to make things work well enough for mingw+wine
Will probably revisit in the future. Adding an ewouldblock
helper rather than duplicating the ifdeffery seems likely
Let's just leave it like this for now and find out if a real
windows test succeeds
|
|
This is available in win32, unlike inet_aton()
|
|
Silly typo, one of those fun C instances where it's surprising
how silently mostly-working such a blatant mistake can be.
For posterity:
The way this was even observed as having an affect is while
verifying graceful handling of connections broken while in the
listen backlog.
With an active scener session idle at the prompt, start another
telnet, connecting without receiving any banner (queued via
backlog), ^]cl that backlogged telnet. Then start another
telnet in the same way. Now go to the idle scener session and
quit. The latest telnet would just sit there, seemingly blocked
behind the broken-while-backlogged connection.
But what was really happening was the banner send got the error
on the broken connection after accepting, as you'd expect. This
bug in the errno tests prevented detecting the genuine error
though, leaving the broken session connected indefinitely.
Fun!
|
|
After putting the recv() in a for(;;) to not have to render a
frame per byte received, I completely dropped the ball on moving
the return and adding the continue to actually finish the change.
This makes creating new scenes via pasting long settings strings
far less laggy. A future improvement would be to not recv() a
byte at a time, but this really isn't a perf-sensitive thing.
|
|
Remove spurious space
|
|
|
|
Trivial related indentation adjustment too
|
|
This adds a BBS-style interface for creating new scenes in a live
rkt session.
It listens on tcp port 54321 on localhost by default, just use
telnet to connect, the rest is fairly self-explanatory.
This is still early days, but it's a whole lot more than nothing.
|
