| Age | Commit message (Collapse) | Author |
|---|
|
This just does the obvious pulling in of til_setup_t, holding the
reference throughout the lifetime of the module context.
|
|
For recursive settings the individual setting being described
needs to get added to a potentially different settings instance
than the one being operated on at the top of the current
setup_func phase.
The settings instance being passed around for a setup_func to
operate on is constified, mainly to try ensure modules don't
start directly mucking with the settings. They're supposed to
just describe what they want next and iterate back and forth,
with the front-end creating the settings from the returned descs
however is appropriate, eventually building up the settings to
completion.
But since it's the setup_func that decides which settings
instance is appropriate for containing the setting.. at some
point it must associate a settings instance with the desc it's
producing, one that is going to be necessarily written to.
So here I'm just turning the existing til_setting_desc_t to a
"spec", unchanged. And introducing a new til_setting_desc_t
embedding the spec, accompanied by a non-const til_settings_t*
"container".
Now what setup_funcs use to express settings are a spec,
otherwise identically to before. Instead of cloning a desc to
allocate it for returning to the front-end, the desc is created
from a spec with the target settings instance passed in.
This turns the desc step where we take a constified settings
instance and cast it into a non-const a more formal act of going
from spec->desc, binding the spec to a specific settings
instance. It will also serve to isolate that hacky cast to a
til_settings function, and all the accessors of
til_setting_desc_t needing to operate on the containing settings
instance can just do so.
As of this commit, the container pointer is just sitting in the
desc_t but isn't being made use of or even assigned yet. This is
just to minimize the amount of churn happening in this otherwise
mostly mechanical and sprawling commit.
There's also been some small changes surrounding the desc
generators and plumbing of the settings instance where there
previously wasn't any. It's unclear to me if desc generators
will stay desc generators or turn into spec generators. For now
those are mostly just used by the drm_fb stuff anyways, modules
haven't made use of them, so they can stay a little crufty
harmlessly for now.
|
|
Existing code was passing 0 which turns into the number of
cores/threads.
That's fine when compose isn't running nested in an already
threaded render, but falls down in something like checkers
w/fill_module=compose since checkers is already threading. But
when checkers creates its fill_module context, it's careful to
pass 1 for n_cpus to prevent that kind of thing. With this
change that no longer falls apart.
|
|
Let's make it so til_module_context_t as returned from
til_module_context_new() can immediately be freed via
til_module_context_free().
Previously it was only after the context propagated out to
til_module_context_create() that it could be freed that way, as
that was where the module member was being assigned.
With this change, and wiring up the module pointer into
til_module_t.create_context() as well for convenient providing to
til_module_context_new(), til_module_t.create_context() error
paths can easily cleanup via `return til_module_context_free()`
But this does require the til_module_t.destroy_context() be able
to safely handle partially constructed contexts, since the
mid-create failure freeing won't necessarily have all the members
initialized. There will probably be some NULL derefs to fix up,
but at least the contexts are zero-initialized @ new.
|
|
It was assumed (n_modules - n_overlayable) would give the number
of non-overlayable modules appropriate as base layers. But with
the skipping of hermetic and experimental modules the base_idx
could be out of reach leaving layers NULL after the loop, which
will segfault later when strlen() assumes it's non-NULL.
This commit does the simple thing and also counts the unusable
modules to subtract from those eligible for base layers along
with n_overlayable.
|
|
This only omits the modules from the random layers
Note the texture_values list is enumerated in compose_setup,
so there's no corresponding change needed there. It might make
sense to change that to a runtime-discovered list though, I think
that was done in the pre-flags era.
|
|
This was mostly done out of convenience at the expense of turning
the fragment struct into more of a junk drawer.
But properly cleaning up owned stream pipes on context destroy
makes the inappropriateness of being part of til_fb_fragment_t
glaringly apparent.
Now the stream is just a separate thing passed to context create,
with a reference kept in the context for use throughout. Cleanup
of the owned pipes on the stream supplied to context create is
automagic when the context gets destroyed.
Note that despite there being a stream in the module context, the
stream to use is still supplied to all the rendering family
functions (prepare/render/finish) and it's the passed-in stream
which should be used by these functions. This is done to support
the possibility of switching out the stream frame-to-frame, which
may be interesting. Imagine doing things like a latent stream
and a future stream and switching between them on the fly for
instance. If there's a sequencing composite module, it could
flip between multiple sets of tracks or jump around multiple
streams with the visuals immediately flipping accordingly.
This should fix the --print-pipes crashing issues caused by lack
of cleanup when contexts were removed (like rtv does so often).
|
|
There needs to be a way to address module context instances
by name externally, in a manner complementary to settings and
taps.
This commit adds a string-based path to til_module_context_t, and
modifies til_module_create_context() to accept a parent path
which is then concatenated with the name of the module to produce
the module instance's new path.
The name separator used in the paths is '/' just like filesystem
paths, but these paths have no relationship to filesystems or
files.
The root module context creation in rototiller's main simply
passes "" as the parent path, resulting in a "/" root as one
would expect.
There are some obvious complications introduced here however:
- checkers in particular creates a context per cpu, simply using
the same seed and setup to try make the contexts identical at
the same ticks value. With this commit I'm simply passing the
incoming path as the parent for creating those contexts, but
it's unclear to me if that will work OK. With an eye towards
taps deriving their parent path from the context path, I guess
these taps would all get the same parent and hash to the same
value despite being duplicated. Maybe it Just Works, but one
thing is clear - there won't be any way to address the per-cpu
taps as-is. Maybe that's desirable though, there's probably
not much use in trying to control the taps at the CPU
granularity.
- when the recursive settings stuff lands, it should bring along
the ability to explicitly name settings blocks. Those names
should override the module name in constructing the path.
I've noted as such in the code.
- these paths probably need to be hashed @ initialization time
so there needs to be a hash function added to til, and a hash
value accompanying the name in the module context. It'd be
dumb to keep recomputing the hash when these paths get used
for hash table lookups multiple times per frame...
there's probably more I'm forgetting right now, but this seems
like a good first step.
fixup root path
|
|
The existing code only really cared about preserving the incoming
texture on behalf of the caller when the compose code itself was
doing something with the texture.
But there's scenarios where the underlying module being rendered
(or its descendants) might play with the texture, and in such a
situation when the outer compose wasn't involving a texture it'd
let the descandants installed texture leak out to the callers
making the texture apply more than one'd expect.
Arguably none of the modules should be missing restoration of the
incoming texture after installing+rendering with their own. But
with this change in place, compose will clean up after nested
modules leaking their texture up.
|
|
moire makes for an interesting texture, esp. mixed with itself:
--seed=0x62f00a7b --module=compose,layers=julia:moire:drizzle,texture=moire
|
|
Preparatory commit for enabling cloneable/swappable fragments
There's an outstanding issue with the til_fb_page_t submission,
see comments. Doesn't matter for now since cloning doesn't happen
yet, but will need to be addressed before they do.
|
|
These modules have been doing their work in prepare_frame(), but
aren't actually threaded modules and don't return a frame plan
from prepare_frame() nor do they provide a render_fragment() to
complement the prepare_frame().
The convention thus far has been that single-threaded modules
just provide a render_fragment and by not providing a
prepare_frame they will be executed serially.
These two modules break the contract in a sense by using
prepare_frame() without following up with render_fragment().
I'm not sure why it happened that way, maybe at one time
prepare_frame() had access to some things that render_fragment()
didn't.
In any case, just make these use render_fragment() like any other
simple non-threaded module would.
This was actually causing a crash when n_cpus=1 because
module_render_fragment() was assuming the prepare_frame() branch
would include a render_fragment(). It should probably be
asserting as such.
|
|
til_setting_desc_t.random() and til_module_randomize_setup() now
take seeds.
Note they are not taking a pointer to a shared seed, but instead
receive the seed by value.
If a caller wishes the seed to evolve on every invocation into
these functions, it should simply insert a rand_r(&seed) in
producing the supplied seed value.
Within a given randomizer, the seed evolves when appropriate.
But isolating the effects by default seems appropriate, so
callers can easily have determinism within their respective scope
regardless of how much nested random use occurs.
|
|
modules/checkers w/fill_module=$module requires a consistent
mapping of cpu to fragnum since it creates a per-cpu
til_module_context_t for the fill_module.
The existing implementation for threaded rendering maximizes
performance by letting *any* scheduled to run thread advance
fragnum atomically and render the acquired fragnum
indiscriminately. A side effect of this is any given frame, even
rendered by the same module, will have a random mapping of
cpus/threads to fragnums.
With this change, the simple til_module_t.prepare_frame() API of
returning a bare fragmenter function is changed to instead return
a "frame plan" in til_frame_plan_t. Right now til_frame_plan_t
just contains the same fragmenter as before, but also has a
.cpu_affinity member for setting if the frame requires a stable
relationship of cpu/thread to fragnum.
Setting .cpu_affinity should be avoided if unnecessary, and that
is the default if you don't mention .cpu_affinity at all when
initializing the plan in the ergonomic manner w/designated
initializers. This is because the way .cpu_affinity is
implemented will leave threads spinning while they poll for
*their* next fragnum using atomic intrinsics. There's probably
some room for improvement here, but this is good enough for now
to get things working and correct.
|
|
Also wire this up to the til_module_context_new() helper and
all its callers.
This is in preparation for modules doing more correct delta-T
derived animation.
|
|
- modules now allocate their contexts using
til_module_context_new() instead of [cm]alloc().
- modules simply embed til_module_context_t at the start of their
respective private context structs, if they do anything with
contexts
- modules that do nothing with contexts (lack a create_context()
method), will now *always* get a til_module_context_t supplied
to their other methods regardless of their create_context()
presence. So even if you don't have a create_context(), your
prepare_frame() and/or render_fragment() methods can still
access seed and n_cpus from within the til_module_context_t
passed in as context, *always*.
- modules that *do* have a create_context() method, implying they
have their own private context type, will have to cast the
til_module_context_t supplied to the other methods to their
private context type. By embedding the til_module_context_t at
the *start* of their private context struct, a simple cast is
all that's needed. If it's placed somewhere else, more
annoying container_of() style macros are needed - this is
strongly discouraged, just put it at the start of struct.
- til_module_create_context() now takes n_cpus, which may be set
to 0 for automatically assigning the number of threads in its
place. Any non-zero value is treated as an explicit n_cpus,
primarily intended for setting it to 1 for single-threaded
contexts necessary when embedded within an already-threaded
composite module.
- modules like montage which open-coded a single-threaded render
are now using the same til_module_render_fragment() as
everything else, since til_module_create_context() is accepting
n_cpus.
- til_module_create_context() now produces a real type, not void
*, that is til_module_context_t *. All the other module
context functions now operate on this type, and since
til_module_context_t.module tracks the module this context
relates to, those functions no longer require both the module
and context be passed in. This is especially helpful for
compositing modules which do a lot of module context creation
and destruction; the module handle is now only needed to create
the contexts. Everything else operating on that context only
needs the single context pointer, not module+context pairs,
which was unnecessarily annoying.
- if your module's context can be destroyed with a simple free(),
without any deeper knowledge or freeing of nested pointers, you
can now simply omit destroy_context() altogether. When
destroy_context() is missing, til_module_context_free() will
automatically use libc's free() on the pointer returned from
your create_context() (or on the pointer that was automatically
created if you omitted create_context() too, for the
bare til_module_context_t that got created on your behalf
anyways).
For the most part, these changes don't affect module creation.
In some ways this eases module creation by making it more
convenient access seed and n_cpus if you had no further
requirement for a context struct.
In other ways it's slightly annoying to have to do type-casts
when you're working with your own context type, since before it
was all void* and didn't require casts when assigning to your
typed context variables.
The elimination for requiring a destroy_context() method in
simple free() of private context scenarios removes some
boilerplate in simple cases.
I think it's a wash for module writers, or maybe a slight win for
the simple cases.
|
|
I don't think rototiller is an appropriate place for being so
uncooperative, if someone gets the case wrong anywhere just make
it work. We should avoid making different things so subtly
different that case alone is the distinction anyways, so I don't
see this creating any future namespace collision problems.
|
|
|
|
I'm not sure why this was being done, it was probably just
vestigial from whatever I bootstrapped the compose module with
and never thought to remove it.
The first compose layer rendered will clear the frame if
necessary. By compose doing it ahead of time, it's performing
potentially unnecessary work clearing if the first layer is a
frame-filler style render where no clear is ever performed.
|
|
This is a mostly mechanical change of using rand_r() in place of
rand(), using the provided seed as the seed state.
There's some outstanding rand()s outside of create_context()
which should probably get switched over, with the seed being
stowed in the context struct. I didn't bother going deeper on
this at the moment in the interests of getting to sleep soon.
|
|
In the recent surge of ADD-style rtv+compose focused development,
a bunch of modules were changed to randomize initial states at
context_create() so they wouldn't be so repetitive.
But the way this was done in a way that made it impossible to
suppress the randomized initial state, which sometimes may be
desirable in compositions. Imagine for instance something like
the checkers module, rendering one module in the odd cells, and
another module into the even cells. Imagine if these modules are
actually the same, but if checkers used one seed for all the odd
cells and another seed for all the even cells. If the modules
used actually utilized the seed provided, checkers would be able
to differentiate the odd from even by seeding them differently
even when the modules are the same.
This commit is a step in that direction, but rototiller and all
the composite modules (rtv,compose,montage) are simply passing
rand() as the seeds. Also none of the modules have yet been
modified to actually make use of these seeds.
Subsequent commits will update modules to seed their
pseudo-randomized initial state from the seed value rather than
always calling things like rand() themselves.
|
|
Idea here is to provide texture sources for obtaining pixel
colors at the til_fb_put_pixel/fill drawing API, making it
possible for at least overlayable modules to serve as
mask/stencil operators where their drawn areas are populated by
the contents of another fragment produced dynamically,
potentially by other modules altogether.
This commit adds a texture=modulename option to the compose
module for specifying if a texture should be used when
compositing, excepting and defaulting to "none" for disabling
texturing.
A future commit should expand this compose option to accept a
potential list of modules for composing the texture in the same
way as the main layers= list functions.
Something this all immediately makes clear is the need for
a better settings syntax, probably in the form of all module
setting specifiers optionally being followed by a squence
of settings, with support for escaping to handle nested
situations.
|
|
Just one case, modules/submit, was using 32x32 tiles and is now
using 64x64. I don't expect it to make any difference.
While here I fixed up the num_cpus/n_cpus naming inconsistencies,
normalizing on n_cpus.
|
|
It's getting crazy in here, this is fun:
--module=rtv,channels=compose,duration=1,snow_duration=0,context_duration=1
which will rejigger the commpose module w/randomized layers every second.
|
|
This should plug a bulk of the setup leaks. Some of the
free_funcs still need to be changed to bespoke ones in modules
that allocate nested things in their respective setup, so those
are still leaking the nested things which are usually just a
small strdup of some kind.
|
|
This brings something resembling an actual type to the private
objects returrned in *res_setup. Internally libtil/rototiller
wants this to be a til_setup_t, and it's up to the private users
of what's returned in *res_setup to embed this appropriately and
either use container_of() or casting when simply embedded at the
start to go between til_setup_t and their private containing
struct.
Everywhere *res_setup was previously allocated using calloc() is
now using til_setup_new() with a free_func, which til_setup_new()
will initialize appropriately. There's still some remaining work
to do with the supplied free_func in some modules, where free()
isn't quite appropriate.
Setup freeing isn't actually being performed yet, but this sets
the foundation for that to happen in a subsequent commit that
cleans up the setup leaks.
Many modules use a static default setup for when no setup has
been provided. In those cases, the free_func would be NULL,
which til_setup_new() refuses to do. When setup freeing actually
starts happening, it'll simply skip freeing when
til_setup_t.free_func is NULL.
|
|
Randomize the setting of the layered modules like rtv does.
This needs to free the setup, similarly to the others, once
that facility is added.
|
|
Mechanical renaming of "zero" to "clear" throughout for this
context.
|
|
Now modules allocate and return an opaque setup pointer in
res_setup when they implement a setup method.
Defaults are utilized when ${module}_create_context() receives a
NULL setup. The default setup used in this case should match the
defaults/preferred values emitted by the module's setup method.
But performing setup should always be optional, so a NULL setup
provided to create_context() is to be expected.
No cleanup of these setup instances is currently performed, so
it's a small memory leak for now. Since these are opaque and may
contain nested references to other allocations, simply using
free() somewhere in the frontend is insufficient. There will
probably need to be something like a til_module_t.setup_free()
method added in the future which modules may assign libc's free()
to when appropriate, or their own more elaborate version.
Lifecycle for the settings is very simple; the setup method
returns an instance, the caller is expected to free it when no
longer needed (once free is implemented). The create_context
consumer of a given setup must make its own copy of the settings
if necessary, and may not keep a reference - it must assume the
setup will be freed immediately after create_context() returns.
This enables the ability to reuse a setup instance across
multiple create_context() calls if desired, one can imagine
something like running the same module with the same settings
multiple times across multiple displays for instance. If the
module has significant entropy the output will differ despite
being configured identically...
With this commit one may change settings for any of the modules
*while* the modules are actively rendering a given context, and
the settings should *not* be visible. They should only affect
the context they're supplied to.
|
|
This is a preparatory commit for cleaning up the existing sloppy
global-ish application of settings during the iterative _setup()
call sequences.
Due to how this has evolved from a very rudimentary thing
enjoying many assumptions about there ever only being a single
module instance being configured by the settings, there's a lot
of weirdness and inconsistency surrounding module setup WRT
changes being applied instantaneously to /all/ existing and
future context's renderings of a given module vs. requiring a new
context be created to realize changes.
This commit doesn't actually change any of that, but puts the
plumbing in place for the setup methods to allocate and
initialize a private struct encapsulating the parsed and
validated setup once the settings are complete. This opaque
setup pointer will then be provided to the associated
create_context() method as the setup pointer. Then the created
context can configure itself using the provided setup when
non-NULL, or simply use defaults when NULL.
A future commit will update the setup methods to allocate and
populate their respective setup structs, adding the structs as
needed, as well as updating their create_context() methods to
utilize those setups.
One consequence of these changes when fully realized will be that
every setting change will require a new context be created from
the changed settings for the change to be realized.
For settings appropriately manipulated at runtime the concept of
knobs was introduced but never finished. That will have to be
finished in the future to enable more immediate/interactive
changing of settings-like values appropriate for interactive
manipulation
|
|
Just mechanical replacement of some remaining ad-hoc
til_module_t.create_context() calls.
The montage module continues using an ad-hoc call because it
forces num_cpus=1 since it's already a threaded using a fragment
per module's tile. This suggests the til_module_create_context()
call should probably accept a num_cpus parameter, perhaps
treating a 0 value as the "automagic" discover value so callers
can explicitly set it when necessary.
|
|
This resulted in a NULL ptr deref, simply treating as invalid
since what's the point of handling a composition devoid of any
layers - it's probably a mistake.
|
|
Now that til_setting_t.desc is not only a thing, but a thing that
is intended to be refreshed regularly in the course of things
like GUI interactive settings construction, it's not really
appropriate to try even act like this these are const anymore.
|
|
Mechanically replaced ad-hoc til_module_t.destroy_context()
invocations with helper calls.
|
|
Always only capitalize the first letter, never capitalize like
titles.
|
|
The existing iterative *_setup() interface only described
settings not found, quietly accepting usable settings already
present in the til_settings_t.
This worked fine for the existing interactive text setup thing,
but it's especially problematic for providing a GUI setup
frontend.
This commit makes it so the *_setup() methods always describe
undescribed settings they recognize, leaving the setup frontend
loop calling into the *_setup() methods to both apply the
description validation if wanted and actually tie the description
to respective setting returned by the _setup() methods as being
related to the returned description.
A new helper called til_settings_get_and_describe_value() has
been introduced primarily for use of module setup methods to
simplify this nonsense, replacing the til_settings_get_value()
calls and surrounding logic, but retaining the til_setting_desc_t
definitions largely verbatim.
This also results in discarding of some ad-hoc
til_setting_desc_check() calls, now that there's a centralized
place where settings become "described" (setup_interactively in
the case of rototiller).
Now a GUI frontend (like glimmer) would just provide its own
setup_interactively() equivalent for constructing its widgets for
a given *_setup() method's chain of returned descs. Whereas in
the past this wasn't really feasible unless there was never going
to be pre-supplied settings.
I suspect the til_setting_desc_check() integration into
setup_interactively() needs more work, but I think this is good
enough for now and I'm out of spare time for the moment.
|
|
Largely mechanical rename of librototiller -> libtil, but
introducing a til_ prefix to all librototiller (now libtil)
functions and types where a rototiller prefix was absent.
This is just a step towards a more libized librototiller, and til
is just a nicer to type/read prefix than rototiller_.
|
|
These modules are meta modules, and the only place this
information is presented currently is in the rtv module captions
overlaying the visual output of unrelated modules.
So it's rather misleading to put the meta module's author and
license on-screen when what's being shown is arguably just a tiny
fraction of the meta module's contribution.
Rather than bother with constructing license and author lists at
runtime from the modules incorporated by these meta modules,
let's instead adopt a policy of meta modules omit any declaration
of license or authorship outside of the source. This is a simple
solution for now, it can be revisited later if necessary.
Changing the .author member of rototiller_module_t to an
.authors() function pointer wouldn't be difficult. But it does
open up something of a can of worms when considering recursive
dependencies and needing to construct unique authors and licenses
lists from things like nested meta modules. Obviously there
can't be infinite recursion as that would manifest in the
rendering path as well, but what I'm more concerned about is
properly handling potentialy quite long lists. It's already
annoying when rtv has to deal with a long settings string, which
I believe currently is just truncated. The same would have to be
done with long authors/licenses I guess.
In any case, I think it's probably fine to just leave authorship
and license ambiguous when a meta module is shown in rtv. It's
certainly preferable to vcaputo@pengaru.com getting credit for
everything shown in the three meta modules currently implemented,
or more specifically, the two shown in rtv; compose and montage.
Note this required making rtv tolerante of NULL .license and
.author rototiller_module_t members.
|
|
Minor cosmetic consistency fixup
|
|
now: "drizzle:stars:spiro:plato"
|
|
In case some code path creates module contexts and renders without
applying settings, it's important to ensure there are defaults.
As-is this would have crashed compose because compose_layers would
have been NULL, and compose_create_context() assumed compose_layers
always contained something useful.
Montage would have been an example of this, though for other reasons
montage has had compose disabled so I don't think anything currently
would have triggered this.
|
|
--module=compose,layers=first:second:third:...
this draws the named modules in the order listed, overdrawing the
output of the previous layers in a cumulative fashion.
|
