| Age | Commit message (Collapse) | Author |
|---|
|
With setup refcounting and a reference bound to the context, we
should just dereference the single instance. The way setups are
used it just as a read-only thing to affect context behavior...
Note I've left the module-type-specific setup pointer despite it
duplicating the setup pointer in the module_context. This is
just a convenience thing so the accessors don't have to cast the
general til_setup_t* to my_module_setup_t* everywhere.
|
|
This just does the obvious pulling in of til_setup_t, holding the
reference throughout the lifetime of the module context.
|
|
There was a time when it made sense for context creates needing
setups but not receiving them to still be functional with some
sane defaults.
But with recursive settings, we really shouldn't ever have
orphaned nested module uses unreachable by a proper setup.
So let's just get rid of this fallback, and exclusively rely on
the baked setups provided by the .setup() methods. They still
have preferred defaults, and the proper setup production
machinery is what should be responsible for applying those
at runtime where they may also be overridden or otherwise
influenced.
|
|
For recursive settings the individual setting being described
needs to get added to a potentially different settings instance
than the one being operated on at the top of the current
setup_func phase.
The settings instance being passed around for a setup_func to
operate on is constified, mainly to try ensure modules don't
start directly mucking with the settings. They're supposed to
just describe what they want next and iterate back and forth,
with the front-end creating the settings from the returned descs
however is appropriate, eventually building up the settings to
completion.
But since it's the setup_func that decides which settings
instance is appropriate for containing the setting.. at some
point it must associate a settings instance with the desc it's
producing, one that is going to be necessarily written to.
So here I'm just turning the existing til_setting_desc_t to a
"spec", unchanged. And introducing a new til_setting_desc_t
embedding the spec, accompanied by a non-const til_settings_t*
"container".
Now what setup_funcs use to express settings are a spec,
otherwise identically to before. Instead of cloning a desc to
allocate it for returning to the front-end, the desc is created
from a spec with the target settings instance passed in.
This turns the desc step where we take a constified settings
instance and cast it into a non-const a more formal act of going
from spec->desc, binding the spec to a specific settings
instance. It will also serve to isolate that hacky cast to a
til_settings function, and all the accessors of
til_setting_desc_t needing to operate on the containing settings
instance can just do so.
As of this commit, the container pointer is just sitting in the
desc_t but isn't being made use of or even assigned yet. This is
just to minimize the amount of churn happening in this otherwise
mostly mechanical and sprawling commit.
There's also been some small changes surrounding the desc
generators and plumbing of the settings instance where there
previously wasn't any. It's unclear to me if desc generators
will stay desc generators or turn into spec generators. For now
those are mostly just used by the drm_fb stuff anyways, modules
haven't made use of them, so they can stay a little crufty
harmlessly for now.
|
|
Part of me wants to give the blinds arbitrary angle instead of
the vert/horiz options. But part of the beauty of blinds is the
jaggy-free aliasing-free sharp edges by virtue of always being
orthonormal using whole pixels.
Maybe in the future there could be a orientation setting where
you pick horiz/vert/angular. Then only when angular does it get
a theta tap and use angled blinds with anti-aliased imperfect
edges...
|
|
Let's make it so til_module_context_t as returned from
til_module_context_new() can immediately be freed via
til_module_context_free().
Previously it was only after the context propagated out to
til_module_context_create() that it could be freed that way, as
that was where the module member was being assigned.
With this change, and wiring up the module pointer into
til_module_t.create_context() as well for convenient providing to
til_module_context_new(), til_module_t.create_context() error
paths can easily cleanup via `return til_module_context_free()`
But this does require the til_module_t.destroy_context() be able
to safely handle partially constructed contexts, since the
mid-create failure freeing won't necessarily have all the members
initialized. There will probably be some NULL derefs to fix up,
but at least the contexts are zero-initialized @ new.
|
|
This was mostly done out of convenience at the expense of turning
the fragment struct into more of a junk drawer.
But properly cleaning up owned stream pipes on context destroy
makes the inappropriateness of being part of til_fb_fragment_t
glaringly apparent.
Now the stream is just a separate thing passed to context create,
with a reference kept in the context for use throughout. Cleanup
of the owned pipes on the stream supplied to context create is
automagic when the context gets destroyed.
Note that despite there being a stream in the module context, the
stream to use is still supplied to all the rendering family
functions (prepare/render/finish) and it's the passed-in stream
which should be used by these functions. This is done to support
the possibility of switching out the stream frame-to-frame, which
may be interesting. Imagine doing things like a latent stream
and a future stream and switching between them on the fly for
instance. If there's a sequencing composite module, it could
flip between multiple sets of tracks or jump around multiple
streams with the visuals immediately flipping accordingly.
This should fix the --print-pipes crashing issues caused by lack
of cleanup when contexts were removed (like rtv does so often).
|
|
There needs to be a way to address module context instances
by name externally, in a manner complementary to settings and
taps.
This commit adds a string-based path to til_module_context_t, and
modifies til_module_create_context() to accept a parent path
which is then concatenated with the name of the module to produce
the module instance's new path.
The name separator used in the paths is '/' just like filesystem
paths, but these paths have no relationship to filesystems or
files.
The root module context creation in rototiller's main simply
passes "" as the parent path, resulting in a "/" root as one
would expect.
There are some obvious complications introduced here however:
- checkers in particular creates a context per cpu, simply using
the same seed and setup to try make the contexts identical at
the same ticks value. With this commit I'm simply passing the
incoming path as the parent for creating those contexts, but
it's unclear to me if that will work OK. With an eye towards
taps deriving their parent path from the context path, I guess
these taps would all get the same parent and hash to the same
value despite being duplicated. Maybe it Just Works, but one
thing is clear - there won't be any way to address the per-cpu
taps as-is. Maybe that's desirable though, there's probably
not much use in trying to control the taps at the CPU
granularity.
- when the recursive settings stuff lands, it should bring along
the ability to explicitly name settings blocks. Those names
should override the module name in constructing the path.
I've noted as such in the code.
- these paths probably need to be hashed @ initialization time
so there needs to be a hash function added to til, and a hash
value accompanying the name in the module context. It'd be
dumb to keep recomputing the hash when these paths get used
for hash table lookups multiple times per frame...
there's probably more I'm forgetting right now, but this seems
like a good first step.
fixup root path
|
|
This gets rid of the static accumulator hack used for the blinds
phase.
|
|
Preparatory commit for enabling cloneable/swappable fragments
There's an outstanding issue with the til_fb_page_t submission,
see comments. Doesn't matter for now since cloning doesn't happen
yet, but will need to be addressed before they do.
|
|
Also wire this up to the til_module_context_new() helper and
all its callers.
This is in preparation for modules doing more correct delta-T
derived animation.
|
|
While testing an experimental checkers w/fill_module=blinds with
ASAN it became clear this module is making flawed assumptions
about fragment->frame_{width,height} and fragment->{width,height}
being equal.
When used by checkers for filling cells, there are situations
where the edge cell fragments need to describe a frame slightly
larger than the drawn area, because the cell size doesn't align
perfectly to the overall window/screen dimensions. So in these
cases the synthesized frame will still be a full cell's
dimensions while the width,height serve to clip within that area.
If modules aren't properly clipping their rendering, instead just
using frame_{width,height}, then they will have to use the
_checked() variants to ensure clipping occurs properly on a
per-pixel (slower) basis.
|
|
- modules now allocate their contexts using
til_module_context_new() instead of [cm]alloc().
- modules simply embed til_module_context_t at the start of their
respective private context structs, if they do anything with
contexts
- modules that do nothing with contexts (lack a create_context()
method), will now *always* get a til_module_context_t supplied
to their other methods regardless of their create_context()
presence. So even if you don't have a create_context(), your
prepare_frame() and/or render_fragment() methods can still
access seed and n_cpus from within the til_module_context_t
passed in as context, *always*.
- modules that *do* have a create_context() method, implying they
have their own private context type, will have to cast the
til_module_context_t supplied to the other methods to their
private context type. By embedding the til_module_context_t at
the *start* of their private context struct, a simple cast is
all that's needed. If it's placed somewhere else, more
annoying container_of() style macros are needed - this is
strongly discouraged, just put it at the start of struct.
- til_module_create_context() now takes n_cpus, which may be set
to 0 for automatically assigning the number of threads in its
place. Any non-zero value is treated as an explicit n_cpus,
primarily intended for setting it to 1 for single-threaded
contexts necessary when embedded within an already-threaded
composite module.
- modules like montage which open-coded a single-threaded render
are now using the same til_module_render_fragment() as
everything else, since til_module_create_context() is accepting
n_cpus.
- til_module_create_context() now produces a real type, not void
*, that is til_module_context_t *. All the other module
context functions now operate on this type, and since
til_module_context_t.module tracks the module this context
relates to, those functions no longer require both the module
and context be passed in. This is especially helpful for
compositing modules which do a lot of module context creation
and destruction; the module handle is now only needed to create
the contexts. Everything else operating on that context only
needs the single context pointer, not module+context pairs,
which was unnecessarily annoying.
- if your module's context can be destroyed with a simple free(),
without any deeper knowledge or freeing of nested pointers, you
can now simply omit destroy_context() altogether. When
destroy_context() is missing, til_module_context_free() will
automatically use libc's free() on the pointer returned from
your create_context() (or on the pointer that was automatically
created if you omitted create_context() too, for the
bare til_module_context_t that got created on your behalf
anyways).
For the most part, these changes don't affect module creation.
In some ways this eases module creation by making it more
convenient access seed and n_cpus if you had no further
requirement for a context struct.
In other ways it's slightly annoying to have to do type-casts
when you're working with your own context type, since before it
was all void* and didn't require casts when assigning to your
typed context variables.
The elimination for requiring a destroy_context() method in
simple free() of private context scenarios removes some
boilerplate in simple cases.
I think it's a wash for module writers, or maybe a slight win for
the simple cases.
|
|
In the recent surge of ADD-style rtv+compose focused development,
a bunch of modules were changed to randomize initial states at
context_create() so they wouldn't be so repetitive.
But the way this was done in a way that made it impossible to
suppress the randomized initial state, which sometimes may be
desirable in compositions. Imagine for instance something like
the checkers module, rendering one module in the odd cells, and
another module into the even cells. Imagine if these modules are
actually the same, but if checkers used one seed for all the odd
cells and another seed for all the even cells. If the modules
used actually utilized the seed provided, checkers would be able
to differentiate the odd from even by seeding them differently
even when the modules are the same.
This commit is a step in that direction, but rototiller and all
the composite modules (rtv,compose,montage) are simply passing
rand() as the seeds. Also none of the modules have yet been
modified to actually make use of these seeds.
Subsequent commits will update modules to seed their
pseudo-randomized initial state from the seed value rather than
always calling things like rand() themselves.
|
|
Just adds TIL_FB_DRAW_FLAG_TEXTURABLE so callers can granularly
inhibit texturing if desired.
|
|
Idea here is to provide texture sources for obtaining pixel
colors at the til_fb_put_pixel/fill drawing API, making it
possible for at least overlayable modules to serve as
mask/stencil operators where their drawn areas are populated by
the contents of another fragment produced dynamically,
potentially by other modules altogether.
This commit adds a texture=modulename option to the compose
module for specifying if a texture should be used when
compositing, excepting and defaulting to "none" for disabling
texturing.
A future commit should expand this compose option to accept a
potential list of modules for composing the texture in the same
way as the main layers= list functions.
Something this all immediately makes clear is the need for
a better settings syntax, probably in the form of all module
setting specifiers optionally being followed by a squence
of settings, with support for escaping to handle nested
situations.
|
|
Just one case, modules/submit, was using 32x32 tiles and is now
using 64x64. I don't expect it to make any difference.
While here I fixed up the num_cpus/n_cpus naming inconsistencies,
normalizing on n_cpus.
|
|
Originally it seemed sensible to make these units of bytes, for
flexibility reasons.
But it's advantageous for everything to be able to assume pixels
are always 4-byte/32-bit aligned. Having the stride/pitch be in
bytes of units made it theoretically possible to produce
unaligned rows of pixels, which would break that assumption.
I don't think anything was ever actually producing such things,
and I've added some asserts to the {sdl,drm}_fb.c page
acquisition code to go fatal on such pages.
This change required going through all the modules and get rid of
their uint32_t vs. void* dances and other such 1-byte vs. 4-byte
scaling arithmetic.
Code is simpler now, and probably faster in some cases. And now
allows future work to just assume things cna always occur 4-bytes
at a time without concern for unaligned accesses.
|
|
This adds count=N and orientation={horizontal,vertical} settings.
Which was precipitated by the introduction of a vertical blinds
mode.
e.g.:
--module=blinds,count=32,orientation=vertical
or for a quick tour of the possibilities:
--module=rtv,channels=blinds,duration=1,context_duration=1,snow_duration=0
weeeee
|
|
In the interests of facilitating randomized automagic layered
compositing, tell the world when you're overlay-appropriate.
|
|
This isn't super interesting but I might just start adding
simplistic overlay style modules for compositing/transition use.
|
