| Age | Commit message (Collapse) | Author |
|---|
|
Originally it seemed sensible to make these units of bytes, for
flexibility reasons.
But it's advantageous for everything to be able to assume pixels
are always 4-byte/32-bit aligned. Having the stride/pitch be in
bytes of units made it theoretically possible to produce
unaligned rows of pixels, which would break that assumption.
I don't think anything was ever actually producing such things,
and I've added some asserts to the {sdl,drm}_fb.c page
acquisition code to go fatal on such pages.
This change required going through all the modules and get rid of
their uint32_t vs. void* dances and other such 1-byte vs. 4-byte
scaling arithmetic.
Code is simpler now, and probably faster in some cases. And now
allows future work to just assume things cna always occur 4-bytes
at a time without concern for unaligned accesses.
|
|
This brings something resembling an actual type to the private
objects returrned in *res_setup. Internally libtil/rototiller
wants this to be a til_setup_t, and it's up to the private users
of what's returned in *res_setup to embed this appropriately and
either use container_of() or casting when simply embedded at the
start to go between til_setup_t and their private containing
struct.
Everywhere *res_setup was previously allocated using calloc() is
now using til_setup_new() with a free_func, which til_setup_new()
will initialize appropriately. There's still some remaining work
to do with the supplied free_func in some modules, where free()
isn't quite appropriate.
Setup freeing isn't actually being performed yet, but this sets
the foundation for that to happen in a subsequent commit that
cleans up the setup leaks.
Many modules use a static default setup for when no setup has
been provided. In those cases, the free_func would be NULL,
which til_setup_new() refuses to do. When setup freeing actually
starts happening, it'll simply skip freeing when
til_setup_t.free_func is NULL.
|
|
This is a preparatory commit for cleaning up the existing sloppy
global-ish application of settings during the iterative _setup()
call sequences.
Due to how this has evolved from a very rudimentary thing
enjoying many assumptions about there ever only being a single
module instance being configured by the settings, there's a lot
of weirdness and inconsistency surrounding module setup WRT
changes being applied instantaneously to /all/ existing and
future context's renderings of a given module vs. requiring a new
context be created to realize changes.
This commit doesn't actually change any of that, but puts the
plumbing in place for the setup methods to allocate and
initialize a private struct encapsulating the parsed and
validated setup once the settings are complete. This opaque
setup pointer will then be provided to the associated
create_context() method as the setup pointer. Then the created
context can configure itself using the provided setup when
non-NULL, or simply use defaults when NULL.
A future commit will update the setup methods to allocate and
populate their respective setup structs, adding the structs as
needed, as well as updating their create_context() methods to
utilize those setups.
One consequence of these changes when fully realized will be that
every setting change will require a new context be created from
the changed settings for the change to be realized.
For settings appropriately manipulated at runtime the concept of
knobs was introduced but never finished. That will have to be
finished in the future to enable more immediate/interactive
changing of settings-like values appropriate for interactive
manipulation
|
|
Now that til_setting_t.desc is not only a thing, but a thing that
is intended to be refreshed regularly in the course of things
like GUI interactive settings construction, it's not really
appropriate to try even act like this these are const anymore.
|
|
Always only capitalize the first letter, never capitalize like
titles.
|
|
The existing iterative *_setup() interface only described
settings not found, quietly accepting usable settings already
present in the til_settings_t.
This worked fine for the existing interactive text setup thing,
but it's especially problematic for providing a GUI setup
frontend.
This commit makes it so the *_setup() methods always describe
undescribed settings they recognize, leaving the setup frontend
loop calling into the *_setup() methods to both apply the
description validation if wanted and actually tie the description
to respective setting returned by the _setup() methods as being
related to the returned description.
A new helper called til_settings_get_and_describe_value() has
been introduced primarily for use of module setup methods to
simplify this nonsense, replacing the til_settings_get_value()
calls and surrounding logic, but retaining the til_setting_desc_t
definitions largely verbatim.
This also results in discarding of some ad-hoc
til_setting_desc_check() calls, now that there's a centralized
place where settings become "described" (setup_interactively in
the case of rototiller).
Now a GUI frontend (like glimmer) would just provide its own
setup_interactively() equivalent for constructing its widgets for
a given *_setup() method's chain of returned descs. Whereas in
the past this wasn't really feasible unless there was never going
to be pre-supplied settings.
I suspect the til_setting_desc_check() integration into
setup_interactively() needs more work, but I think this is good
enough for now and I'm out of spare time for the moment.
|
|
Largely mechanical rename of librototiller -> libtil, but
introducing a til_ prefix to all librototiller (now libtil)
functions and types where a rototiller prefix was absent.
This is just a step towards a more libized librototiller, and til
is just a nicer to type/read prefix than rototiller_.
|
|
None of the existing fb_ops_t implementations need this, but due
to how GTK+ works, the GTK+ frontend using librototiller will likely
want to wire up calling fb_flip() on the fb from behind fb_ops.
|
|
A lot of errors were being conflated as ENOMEM due to the lazy
use of NULL pointer returns for errors.
This commit reworks a handful of those return paths to instead
return an errno-style int, storing the results on success at a
supplied result pointer.
It's kind of ugly, and I make some assumptions about libdrm
setting errno on failure - it too uses this lazy API of returning
NULL pointers on failure. Hopefully errno is always set by an
underlying ioctl failing.
The SDL error API is also pretty gross, being cross-platform it
defines its own error codes so I try vaguely map these to errno
values.
I'm considering this a first approximation at fixing this up, but
there are probably bugs as I did it real fast and nasty.
It at least seems to all still work OK here in the non-error
paths I tested. So it doesn't seem more broken than before at a
glance.
|
|
Some omissions, nothing in these is public outside of what's
explicitly plumbed out via fb_ops_t.
|
|
The put_pixel helpers really needed reworking to properly handle
subframe fragments modules like montage will utilize. I had the
stride present as it's convenient for a number of modules that
maintain a buf pointer as they progress down a row, but the pitch
is more applicable to put_pixel for scaling the y coordinate.
Now there's both pitch and stride so everyone's happy with what's
most convenient for their needs.
|
|
Slight refactor to make call sites less annoying.
Now takes a (setting_desc_t *) instead of the members as discrete
parameters, and returns an errno on error so callers can simply
propagate error codes out rather than having to get access to errno
defines, check for NULL and return -ENOMEM etc.
It also makes the call sites self documenting by employing designated
initializers in compound literals for the supplied setting_desc_t.
This is in prep for runtime-configurable module settings.
|
|
The fb_ops entrypoints and their descendants are purely readers
of the settings, so constify their settings_t instances and the
operative functions which only read settings.
|
|
This should probably be split into multiple commits, but
for simplicity sake it's all cut over at once.
drm_fb.c sees major changes, migrating the remaining drm-specific bits
from drmsetup into it, behind the settings API.
rototiller.c sees a bunch of scaffolding surrounding the settings API
and wiring it up into the commandline handling and renderers and video
backends.
fb.[ch] see minor changes as settings get plumbed to the backend
drmsetup.[ch] goes bye bye
|
|
Largely mechanical copying of the drm code into the new fb_ops_t
abstraction. Dormant for now.
|
