| Age | Commit message (Collapse) | Author |
|---|
|
This way if a given context gets rendered repeatedly for the same
tick, no movement occurs, until ticks changes.
|
|
Also wire this up to the til_module_context_new() helper and
all its callers.
This is in preparation for modules doing more correct delta-T
derived animation.
|
|
This is leftover from 4e5286 which was mostly removed when
frame zeroing was simplified, but for some reason this was
missed.
Just get rid of the count as it's not used.
|
|
While testing an experimental checkers w/fill_module=blinds with
ASAN it became clear this module is making flawed assumptions
about fragment->frame_{width,height} and fragment->{width,height}
being equal.
When used by checkers for filling cells, there are situations
where the edge cell fragments need to describe a frame slightly
larger than the drawn area, because the cell size doesn't align
perfectly to the overall window/screen dimensions. So in these
cases the synthesized frame will still be a full cell's
dimensions while the width,height serve to clip within that area.
If modules aren't properly clipping their rendering, instead just
using frame_{width,height}, then they will have to use the
_checked() variants to ensure clipping occurs properly on a
per-pixel (slower) basis.
|
|
Contexts aren't void* anymore, and free the contexts array too on
failure.
|
|
This initializer could perform an out-of-bounds read since it
occurs before the n_modules bounds check.
Since the variable isn't even being used anymore just get rid of
this. Also found via ASAN.
|
|
While testing a checkers change that fills cells using other
modules, ASAN kept tripping on pixbounce:
==147817==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7fc78a31c10c at pc 0x55b30cd406e2 bp 0x7fc790afd0d0 sp 0x7fc790afd0c8
WRITE of size 4 at 0x7fc78a31c10c thread T2
#0 0x55b30cd406e1 in til_fb_fragment_put_pixel_unchecked pixbounce.c
#1 0x55b30cd3f8ae in pixbounce_render_fragment pixbounce.c
#2 0x55b30cd1dffb in module_render_fragment til.c
#3 0x55b30cd1d989 in til_module_render (/home/foo/src/rototiller/build/src/rototiller+0x134989)
#4 0x55b30cd22534 in checkers_render_fragment checkers.c
#5 0x55b30cd14681 in thread_func til_threads.c
#6 0x7fc792b3d5c1 in start_thread pthread_create.c
#7 0x7fc792bc2583 in __clone (/usr/lib/libc.so.6+0x112583)
0x7fc78a31c10c is located 2276 bytes to the right of 1228840-byte region [0x7fc78a1ef800,0x7fc78a31b828)
allocated by thread T0 here:
#0 0x55b30cccf219 in __interceptor_malloc (/home/foo/src/rototiller/build/src/rototiller+0xe6219)
#1 0x7fc792d0e528 (/usr/lib/libSDL2-2.0.so.0+0x39528)
Thread T2 created by T0 here:
#0 0x55b30cc3cfa8 in pthread_create (/home/foo/src/rototiller/build/src/rototiller+0x53fa8)
#1 0x55b30cd13fff in til_threads_create (/home/foo/src/rototiller/build/src/rototiller+0x12afff)
#2 0x55b30cd1d573 in til_init (/home/foo/src/rototiller/build/src/rototiller+0x134573)
#3 0x55b30cd08f6c in main (/home/foo/src/rototiller/build/src/rototiller+0x11ff6c)
#4 0x7fc792add30f in __libc_start_call_main libc-start.c
SUMMARY: AddressSanitizer: heap-buffer-overflow pixbounce.c in til_fb_fragment_put_pixel_unchecked
Shadow bytes around the buggy address:
0x0ff97145b7d0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0ff97145b7e0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0ff97145b7f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0ff97145b800: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0ff97145b810: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
=>0x0ff97145b820: fa[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0ff97145b830: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0ff97145b840: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0ff97145b850: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0ff97145b860: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0ff97145b870: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==147817==ABORTING
---
Rather than spend time digging into pixbounce's arithmetic, just
using the checked variant for now.
|
|
This introduces a very naive unoptimized moire interference
pattern module, it's rather slow complete with a sqrtf() per
pixel per center.
|
|
- modules now allocate their contexts using
til_module_context_new() instead of [cm]alloc().
- modules simply embed til_module_context_t at the start of their
respective private context structs, if they do anything with
contexts
- modules that do nothing with contexts (lack a create_context()
method), will now *always* get a til_module_context_t supplied
to their other methods regardless of their create_context()
presence. So even if you don't have a create_context(), your
prepare_frame() and/or render_fragment() methods can still
access seed and n_cpus from within the til_module_context_t
passed in as context, *always*.
- modules that *do* have a create_context() method, implying they
have their own private context type, will have to cast the
til_module_context_t supplied to the other methods to their
private context type. By embedding the til_module_context_t at
the *start* of their private context struct, a simple cast is
all that's needed. If it's placed somewhere else, more
annoying container_of() style macros are needed - this is
strongly discouraged, just put it at the start of struct.
- til_module_create_context() now takes n_cpus, which may be set
to 0 for automatically assigning the number of threads in its
place. Any non-zero value is treated as an explicit n_cpus,
primarily intended for setting it to 1 for single-threaded
contexts necessary when embedded within an already-threaded
composite module.
- modules like montage which open-coded a single-threaded render
are now using the same til_module_render_fragment() as
everything else, since til_module_create_context() is accepting
n_cpus.
- til_module_create_context() now produces a real type, not void
*, that is til_module_context_t *. All the other module
context functions now operate on this type, and since
til_module_context_t.module tracks the module this context
relates to, those functions no longer require both the module
and context be passed in. This is especially helpful for
compositing modules which do a lot of module context creation
and destruction; the module handle is now only needed to create
the contexts. Everything else operating on that context only
needs the single context pointer, not module+context pairs,
which was unnecessarily annoying.
- if your module's context can be destroyed with a simple free(),
without any deeper knowledge or freeing of nested pointers, you
can now simply omit destroy_context() altogether. When
destroy_context() is missing, til_module_context_free() will
automatically use libc's free() on the pointer returned from
your create_context() (or on the pointer that was automatically
created if you omitted create_context() too, for the
bare til_module_context_t that got created on your behalf
anyways).
For the most part, these changes don't affect module creation.
In some ways this eases module creation by making it more
convenient access seed and n_cpus if you had no further
requirement for a context struct.
In other ways it's slightly annoying to have to do type-casts
when you're working with your own context type, since before it
was all void* and didn't require casts when assigning to your
typed context variables.
The elimination for requiring a destroy_context() method in
simple free() of private context scenarios removes some
boilerplate in simple cases.
I think it's a wash for module writers, or maybe a slight win for
the simple cases.
|
|
Preparatory commit for embedding a til type in the module
contexts, similar to til_setup_t for the module setups.
This will provide a convenient way to embed seed and n_cpus in
every module context, without having to implement that yourself.
But it also makes it so modules with no need for a context can
continue not implementing those methods, without obstructing
libtil from transparently doing it anyways with a bare
til_module_context_t.
This is kind of important as the current architecture made it
difficult to do things like create contexts with explicit n_cpus,
like in composite/meta modules which are already threaded and
wish to run embedded modules with n_cpus=1.
With this addition, n_cpus could be specified at context create
time, and it will always become remembered in the
til_module_context_t regardless of what the module implements.
That way it can definitely be carried into the prepare/render
methods, with no opportunity for disconnect between what was
passed to context create and what goes to the render methods.
Nothing is functionally changed in this commit alone, subsequent
commits will actually make use of it and realize what I've said
above.
|
|
This commit improves the error printed when cli-supplied args
fail, adding at least the key name to what used to be just a
stringified errno:
```
$ src/rototiller --module=shapes,scale=99
Shape type:
0: circle
1: pinwheel
2: rhombus
3: star
Enter a value 0-3 [1 (pinwheel)]:
Fatal error: unable to use args for setting "scale": Invalid argument
$
```
|
|
Forgot to add this when adding --go
|
|
eventually this file needs to get rewritten comprehensively with
the original content moved somewhere like ORIGIN.txt or whatever.
|
|
In rototiller this disables the automatic displaying of settings
actually used when they differ from what was explicitly specified
as args. Which also disables the waiting to press a key.
This should also get used by glimmer to automatically start
rendering without just putting up the configured settings panel
and waiting for a click on "go!".
|
|
I don't think rototiller is an appropriate place for being so
uncooperative, if someone gets the case wrong anywhere just make
it work. We should avoid making different things so subtly
different that case alone is the distinction anyways, so I don't
see this creating any future namespace collision problems.
|
|
A bunch of these have just been done
|
|
I didn't like the too fast spins where you can't even really get
a read on what's going on in the shape.
Suspect this will get tweaked more in the future...
|
|
This is kind of experimental, not sure how I feel about it.
pinch=0..1 with a bunch of fractions, 0 disables it.
pinch_spin=-1..1 same as spin=
pinches=1..10 number of pinches, which come in pairs
This applies to all the current shapes, for a tour:
--module=rtv,channels=shapes,duration=2,context_duration=2,snow_module=none --defaults
I think the speeds might go to high atm, I kind of liked the
slower spins before all this more.
|
|
woops
|
|
scale=1-.5 with a few other fractions in between
Mostly added for the sake of rtv/compose where modules currently
always go full-frame, which can be really annoying sometimes for
shapes without any variety in the scale.
When checkers starts filling cells using modules like shapes,
it'll be interesting to see how this fares there since it'll
probably be randomizing the settings too. At least floored at
50% should still produce something legible in /most/ of the
checkers cell sizes. Definitely won't look like anything in the
smaller end of the checkers sizes though... hrm.
|
|
Introduces spin={-1,0,1} with a few intermediate fractions on
both sides of 0. Controls rate and direction.
As-is these multiple choice style options don't let you
explicitly set a value in rototiller on the commandline that
isn't in the set.
There should probably be a flag in the desc we can set when
bypassing the available options is tolerable, probably when
regex's start getting enforced.
That way rototiller's commandline setting parsing can just lean
on the regex, and if the desc says anything can come in that
passes the regex even if it's not in the values set, this can all
still work and have something resembling input validation.
At the end of the day, the multiple choice value sets are
supposed to be a convenience/guide to a sane variety of values
and of particular utility to randomizers like used by
rtv/montage/compose, but also GUI setting selectors like in
glimmer.
They're not intended to get in the way preventing development
from accessing explicit values of arbitrary precision which can
be really necessary especially when trying to determine what's
best for going in the values set.
|
|
Replace the hard-coded 5 points with a points=3-20 setting
Nothing fancy going on here
|
|
|
|
- clear padding when {letter,pillar}boxed
- limit costly rendering to shape size area when boxed
- fix <= inclusion tests in circle and rhombus: s/<=/</
|
|
I'm not sure why this was being done, it was probably just
vestigial from whatever I bootstrapped the compose module with
and never thought to remove it.
The first compose layer rendered will clear the frame if
necessary. By compose doing it ahead of time, it's performing
potentially unnecessary work clearing if the first layer is a
frame-filler style render where no clear is ever performed.
|
|
Just assume a fragment has been logically cleared after
til_module_render() has done all its potential steps.
I'm not certain this doesn't break some existing assumptions WRT
fragmented/threaded clears and their propagation out to the outer
frame.
But I've been operating under the assumption that this was
already happening in terms of an implicit setting of
til_fb_fragment_t.cleared after a module's render happened.
Except I don't see anything in the existing code or history
actually doing that, which is odd.
For modules that don't invoke til_fb_fragment_clear() explicitly
because they are frame-fillers (think submit, swab, ray, julia,
plasma, these are all full-frame renders that don't benefit from
pre-clearing), they weren't leaving fragment->cleared set,
despite having fully initialized the frame's contents.
We should be able to just assume after prepare/render/finish has
happened for a given module, the target fragment has been
cleared.
Commit 4e5286 had introduced somewhat complicated .cleared
maintenance and propagation for threaded renders, but when we
just treat all finished module renders into a given fragment as
logically clearing the fragment we can just skip all that.
|
|
This is a mostly mechanical change of using rand_r() in place of
rand(), using the provided seed as the seed state.
There's some outstanding rand()s outside of create_context()
which should probably get switched over, with the seed being
stowed in the context struct. I didn't bother going deeper on
this at the moment in the interests of getting to sleep soon.
|
|
n_cells is a size_t, use %zu
clang complained, gcc doesn't, huh
|
|
In the recent surge of ADD-style rtv+compose focused development,
a bunch of modules were changed to randomize initial states at
context_create() so they wouldn't be so repetitive.
But the way this was done in a way that made it impossible to
suppress the randomized initial state, which sometimes may be
desirable in compositions. Imagine for instance something like
the checkers module, rendering one module in the odd cells, and
another module into the even cells. Imagine if these modules are
actually the same, but if checkers used one seed for all the odd
cells and another seed for all the even cells. If the modules
used actually utilized the seed provided, checkers would be able
to differentiate the odd from even by seeding them differently
even when the modules are the same.
This commit is a step in that direction, but rototiller and all
the composite modules (rtv,compose,montage) are simply passing
rand() as the seeds. Also none of the modules have yet been
modified to actually make use of these seeds.
Subsequent commits will update modules to seed their
pseudo-randomized initial state from the seed value rather than
always calling things like rand() themselves.
|
|
Mostly for compositing purposes, here will be a corpus of 2D
shapes, parameterized/procedurally generated and able to rotate
and perhaps have other dynamics added.
What shapes are there presently I had started implementing in
checkers as "styles", before realizing they really should just be
a separate module checkers can call into.
Not terribly interesting by itself, but as blinds and checkers
demonstrated, these things deliver a lot of value in
compositional situations. They're creating the palette to draw
from.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We don't actually want to produce indices 0-width and 0-height
|
|
|
|
There's more to cleanup in rtv destruction, but this is the major
one.
|
|
Found via -fsanitize=address, this is a quick and dirty way to
prevent the OOB access without adding more conditionals, just
prevent scaling the fragment dimensions to the full grid
dimensions.
This could be done better by reworking things a bit and putting
zero at the center of the grid with a -1..+1 mapping, so rounding
towards zero would land in the middle as opposed to off the
start, with the existing .5f offset.
But for now just fix the bug, nobody will notice the slight LCD
overscan-style difference of bilerp=on vs. off due to this way.
|
|
This was causing the snow module to scribble via montage, since
snow uses per-cpu rand seeds indexed using the cpu value.
I didn't dig in to see if this was a vestigial thing where
fragnum once was passed as a parameter (it's also in
til_fb_fragment_t.number, but probably wasn't always that way).
But it's now used as a cpu idx, but since they're the same type
nothing complained, they say programming is hard.
|
|
Also shortened the durations across the board, and defaulted snow
to "none".
With "compose" being another meta module, and the randomized
settings, this actually gives a more interesting grand tour of
everything possible.
|
|
Just adds TIL_FB_DRAW_FLAG_TEXTURABLE so callers can granularly
inhibit texturing if desired.
|
|
Idea here is to provide texture sources for obtaining pixel
colors at the til_fb_put_pixel/fill drawing API, making it
possible for at least overlayable modules to serve as
mask/stencil operators where their drawn areas are populated by
the contents of another fragment produced dynamically,
potentially by other modules altogether.
This commit adds a texture=modulename option to the compose
module for specifying if a texture should be used when
compositing, excepting and defaulting to "none" for disabling
texturing.
A future commit should expand this compose option to accept a
potential list of modules for composing the texture in the same
way as the main layers= list functions.
Something this all immediately makes clear is the need for
a better settings syntax, probably in the form of all module
setting specifiers optionally being followed by a squence
of settings, with support for escaping to handle nested
situations.
|
|
Same as for roto and plasma...
|
|
As with roto, it's important to differentiate plasma instances
when layered... plus it's kind of boring to always start plasma
identically.
|
|
Just something quick and dirty to differentiate roto layers, plus
it's kind of boring having roto always start at the same state.
|
|
It's no longer necessary to specify both snow_duration=0 AND
snow_module=none to disable snow, just specify snow_module=none.
A future commit should really make describing the "snow_duration"
setting contingent on snow_module != "none".
|
|
rtv special-cased handling a nil module to mean clear the
fragment, and called this "none"
But it really makes more sense for rtv to treat "none" as not
doing anything at all for its snow_module - not even blanking.
And it would be nice to have a consistent way to express a blank
module throughout rototiller, so this introduces a concept of
built-in modules accessible only via explicit lookup by name
which don't get enumerated via til_get_modules(), as they're
inherently uninteresting more utility-oriented modules for use by
other modules.
For now it's only "blank" that constitutes the built-ins list,
but expanding this is only a matter of introducing more modules
there. Future commits will rework rtv to use "blank" in place of
its current "none", and rtv's "none" will be reworked to
represent no snow mechanism at all, obviating the need to specify
snow_duration=0,snow_module=none required today.
|
|
Just one case, modules/submit, was using 32x32 tiles and is now
using 64x64. I don't expect it to make any difference.
While here I fixed up the num_cpus/n_cpus naming inconsistencies,
normalizing on n_cpus.
|
