From 1d637da186506754ddd06efd47c917dc89faf1c9 Mon Sep 17 00:00:00 2001 From: iovar Date: Wed, 8 Nov 2006 16:46:28 +0000 Subject: purge rMD-exp module git-svn-id: https://recordmydesktop.svn.sourceforge.net/svnroot/recordmydesktop/trunk@155 f606c939-3180-4ac9-a4b8-4b8779d57d0a --- rMD-exp/doc/recordmydesktop.1 | 438 ------------------------------------------ 1 file changed, 438 deletions(-) delete mode 100644 rMD-exp/doc/recordmydesktop.1 (limited to 'rMD-exp/doc/recordmydesktop.1') diff --git a/rMD-exp/doc/recordmydesktop.1 b/rMD-exp/doc/recordmydesktop.1 deleted file mode 100644 index 6fa7da5..0000000 --- a/rMD-exp/doc/recordmydesktop.1 +++ /dev/null @@ -1,438 +0,0 @@ -.TH "RECORDMYDESKTOP" 1 "13/7/2006" "Linux" - - -.SH NAME -recordMyDesktop \- record desktop sessions to an Ogg\-Theora\-Vorbis file. - - -.SH SYNOPSIS - -.B recordmydesktop -[ -.B -Options -]^ -.B -filename -.br -.br -.SH DESCRIPTION -.PP - recordMyDesktop produces a file(default out.ogg) that contains a video and audio recording -.br -of a linux desktop session. The default behavior of recording is to mark areas that have changed(through libxdamage) -.br -and update the frame. This behavior can be changed (option -.B -\-\-full\-shots -) to produce a more accurate result -.br -or capture windows that do not generate events on change(windows with accelerated 3d context) -.br -but this will notably increase the workload. In this case, enabling the -.B -\-\-with\-shared -option is recommended -.br -(by default this option is switched on or off at every frame, according to the size of the area to be aquired). -.br -.br -recordMyDesktop doesn't have a commandline interface. -.br -After startup, it can be controled only through the following signals: -.br -.br -.B -SIGUSR1 -causes the program to pause if it's currently recording, and vice-versa. -.br -.B -SIGTERM -causes normal termination of the recording. -.br -.B -SIGINT -also causes normal termination. -.br -.B -SIGABRT -terminates the program and removes the specified output file. -.br -.br -.br -A typical scenario of recording can be a command as simple as: -.br -.B -~$ recordmydesktop -.br -which will produce a fullscreen recording named out.ogg -.br -while a command like: -.br -.B -~$ recordmydesktop foo.ogg -.br -will write output to foo.ogg -.br -.br -Since version 0.3, encoding will happen right after the recording finishes. -.br -While this behavior saves a lot of CPU, you can revert to the old one by entering the \-\-on\-the\-fly\-encoding switch. -.br -.br -To specify a region for recording you can type this: -.br -.B -~$ recordmydesktop -x X_pos -y Y_pos -width WIDTH -height HEIGHT -o foo.ogg -.br -where X_pos and Y_pos specify the offset in pixels from the upper left -.br -corner of your screen and WIDTH and HEIGHT the size of the window to be recorded(again in pixels). -.br -If the area extends beyond your current resolution, you will be notified appropriately and nothing will happen. -.br -Notice also, that if any option is entered you have to specify the output file with the \-o switch. -.br -If you try to save under a filename that already exists, the name will be post-fixed with a number (incremented if that name exists already) -.br -.br -.B -To normally end a recording you can press ctl-c. -.br -(which will send a -.B -SIGINT -to the program). -.br -.br -For further manipulation of the end result look at the -.B -OPTIONS -and -.B -NOTES -sections. -.br -.br -.br -.SH EXIT STATUS -0 is success -.br -Non-zero means an error occurred, which is printed in stderr. -.br -.br -The following error codes indicate the nature of the error: -.br -1 Error while parsing the arguments. -.br -2 Initializing the encoder failed(either vorbis or theora). -.br -3 Could not open/configure sound card. -.br -4 Xdamage extension not present. -.br -5 Shared memory extension not present. -.br -6 Xfixes extension not present. -.br -7 XInitThreads failed. -.br -8 No $DISPLAY environment variable and none specified as argument. -.br -9 Cannot connect to Xserver. -.br -10 Color depth is not 24bpp. -.br -11 Improper window specification. -.br -12 Cannot attach shared memory to proccess. -.br -13 Cannot open file for writting. -.br -.br -.SH OPTIONS -.PP -.B -Generic Options: -.br -.TP -.B - \-h or \-\-help - Print help summary and exit. -.br -.TP -.B - \-\-version - Print program version and exit. -.br -.PP -.br -.B -Image Options: -.br -.TP -.B - \-windowid id_of_window - id of window to be recorded. -.br -.TP -.B - \-display DISPLAY - Display to connect to. -.br -.TP -.B - \-x X - Offset in x direction. -.br -.TP -.B - \-y Y - Offset in y direction. -.br -.TP -.B - \-width N - Width of recorded window. -.br -.TP -.B - \-height N - Height of recorded window. -.br -.TP -.B -.br -.br -.TP -.B - \-dummy\-cursor color - Draw a dummy cursor, instead of the normal one.Value of color can be "black" or "white". -.br -.TP -.B - \-\-no\-cursor - Disable drawing of the cursor. -.br -.TP -.B - \-\-with\-shared - Enable usage of MIT\-shared memory extension at all times. -.br -.TP -.B - \-\-no\-cond\-shared - Do not use the MIT\-shared memory extension when aquiring large areas. -.br -.TP -.B - \-shared\-threshold n - Threshold over which shared memory is used(default 75). -.br -.TP -.B - \-\-full\-shots - Take full screenshot at every frame(Not recomended!). -.br -.TP -.B - \-\-quick\-subsampling - Do subsampling of the chroma planes by discarding extra pixels. -.br -.TP -.B - \-fps N(number>0.0) - A positive number denoting desired framerate. -.br -.br -.PP -.B -Sound Options: -.br -.TP -.B - \-channels N(number>0) - A positive number denoting desired sound channels in recording. -.br -.TP -.B - \-freq N(number>0) - A positive number denoting desired sound frequency. -.br -.TP -.B - \-device SOUND_DEVICE - Sound device(default hw0:0). -.br -.TP -.B - \-\-no\-sound - Do not record sound. -.br -.PP -.br -.B -Encoding Options: -.br -.TP -.B - \-\-on\-the\-fly\-encoding - Encode the audio-video data, while recording. -.br -.TP -.B - \-v_quality n - A number from 0 to 63 for desired encoded video quality(default 63). -.br -.TP -.B - \-v_bitrate n - A number from 45000 to 2000000 for desired encoded video bitrate(default 45000). -.br -.TP -.B - \-\-drop\-frames - Allow theora encoder to drop frames(this can significantly lower proccessing times). -.br -.TP -.B - \-s_quality n - Desired audio quality(\-1 to 10). -.br -.PP -.br -.B -Misc Options: -.br -.TP -.B - \-\-no\-wm\-check - When a 3d compositing window manager is detected the program will function as if the - \-\-full\-shots and \-\-with\-shared options have been specified. This option disables that - behavior alltogether. -.br -.TP -.B - \-\-zero\-compression - Image data are always cached uncompressed. -.br -.TP -.B - \-workdir DIR - Location where a temporary directory will be created to hold project files(default $HOME). -.br -.TP -.B - \-delay n[H|h|M|m] - Number of secs(default),minutes or hours before capture starts(number can be float). -.br -.TP -.B - \-\-overwrite - If there is already a file with the same name, delete it. - Default action is to add a number postfix to the new file. - For example when not specifying a name, if out.ogg exists, - the new file will be out.ogg.1 and if that exists too, out.ogg.2 - and so on (no ad-infinitum though, more like ad-short-integer...) -.br -.TP -.B - \-o filename - Name of recorded video(default out.ogg). - - - -.PP -.br -If no other option is specified, filename can be given without the \-o switch. -.br -.br -.SH USAGE -.TP -.B recordmydesktop -.br -[\-h| \-\-help| \-\-version| \-delay n[H|h|M|m]| \-windowid id_of_window| -.br -\-display DISPLAY| \-x X| \-y Y|\-width N| \-height N| \-fps N(number>0)| \-\-on\-the\-fly\-encoding| -.br -\-v_quality n| \-s_quality n| \-v_bitrate n| \-\-no\-framedrop| \-dummy\-cursor color| -.br -\-\-no\-cursor| \-freq N(number>0)| \-channels N(number>0)| \-device SOUND_DEVICE| -.br -\-\-no\-sound| \-\-with\-shared| \-\-no\-cond\-shared| \-shared\-threshold n| \-\-full\-shots| -.br -\-\-quick\-subsampling| \-workdir DIR| \-\-zero\-compression| \-\-no\-wm\-check| \-\-overwrite| \-o filename]^filename -.br -.br -.br -.br -.SH ENVIRONMENT -.TP -.B -DISPLAY -.br -Display environment variable, specifying X server to connect to. -.br -.SH NOTES -.br - Recording a window using the \-windowid option, doesn't track the window itself, but the region that it covers. -.br -Also when using that option the \-x,\-y,\-width and \-height options are relative to the specified window area. -.br -An easy way to find out the id of a window, is by using the -.B -xwininfo -program. -.br -Running a command like : -.br -.B -xwininfo |grep "Window id:"|sed \-e "s/xwininfo\\:\\ Window id:\\ // ;s/\\ \.*//" -.br -will give you only the id of the window(which should look like this: 0x4800005) -.br -More conviniently you can put all that in the command that launches recordMyDesktop like this: -.br -.B -~$recordmydesktop -windowid $(xwininfo |grep "Window id:"|sed \-e "s/xwininfo\\:\\ Window id:\\ // ;s/\\ \.*//" ) -.br -.br - Also, the lower quality you select on a video recording ( -.B --v_quality -option), the highest CPU-power that you will need. -.br -So -.B -if you are doing the encoding on the fly -,it's better to start with default values and manipulate -the end\-result with another program. -.br -An excellent converter is -.B -ffmpeg2theora -, which despite its name is also a theora to theora converter. -.br -Changing the quality of a recordng with it,can be as simple as : -.br -.B -ffmpeg2theora infile.ogg \-v 3 \-a 4 \-o outfile.ogg -.br -It can even perform resizing on the size of the recording, or change the overall duration. -.br -.br -.SH BUGS -Does not record 3d windows, if \-\-full\-shots isn't specified. -.br -Saving 65536 files with the same name, will result in upredictable behavior, -.br -which might manifest as an endless loop, or a segmentation fault. -.br -.SH AUTHORS -John Varouhakis(johnvarouhakis@gmail.com) -.br -.SH SEE ALSO -.BR xwininfo(1) -.br -.BR ffmpeg2theora(1) -.br \ No newline at end of file -- cgit v1.2.1