From a1b51f453411543a175a61106297c18e0f35d2c1 Mon Sep 17 00:00:00 2001 From: Vito Caputo Date: Sat, 9 Apr 2022 17:50:57 -0700 Subject: doc: first stab at module-writing documentation Things have become sufficiently mature and featureful that attempting to describe their usage seemed worthwhile. There's still no cleanup of setups returned in *res_setup and that should be both fixed and documented at some point. The settings in general are still rather leaky as-is, even the example in this document leaks. But it's relatively harmless for now. --- HACKING.txt | 561 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 561 insertions(+) create mode 100644 HACKING.txt diff --git a/HACKING.txt b/HACKING.txt new file mode 100644 index 0000000..fc4662a --- /dev/null +++ b/HACKING.txt @@ -0,0 +1,561 @@ +Hacking on rototiller / libtil: + + Introduction: + + This document primarily attempts to describe how one goes about + hacking on new rototiller modules. + + Initially only a bare minimum module addition is described. This + is a single-threaded, unconfigurable at runtime, simple module, requiring + only a single rendering function be implemented. + + Later more advanced topics like threaded rendering and runtime + configurability will be covered. These are completely optional and can + safely be ignored until such facilities are desired. + + The creative process of developing a new module often starts with + writing nothing more than a rendering function, later evolving to become + more complex in pursuit of better performance via threaded rendering, and + greater flexibility via runtime settings. + + + Getting started: + + After acquiring a copy of the source, adding a new module to rototiller + consists of four steps: + + 1. Giving the module a unique name, creating a directory as named under + src/modules. This can be a temporary working name just to get + started, what's important is that it not conflcit with any existing + module names. + + 2. Implementing at least a ${new}_render_fragment() method for the module + in a file placed in its directory at "src/modules/${new}/${new}.c". + + 3. Integrating the module into the build system by adding its directory + to the existing "configure.ac" and "src/modules/Makefile.am" files, + and creating its own "src/modules/${new}/Makefile.am" file. + + 4. Binding the module into libtil exposing it to the world by adding it + to the modules[] array in "src/til.c". + + Most of these steps are self-explanatory after looking at the existing + code/build-system files. It's common to bootstrap a new module by copying + a "Makefile.am" and "${new}.c" file from one of the existing modules. + + There's also a "stub" branch provided in the git repository, adding a + bare minimum module rendering a solid white canvas every frame. This is + intended for use as a clean slate for bootstrapping new modules, there's + no harm in deriving new modules from either this "stub" branch, or + existing modules. + + + Configuring and building the source: + + Rototiller uses GNU Autotools for its build system. Generally all + that's required for building the source is the following sequence of + shell commands: + + $ ./bootstrap + $ mkdir build; cd build; ../configure + $ make + + The source is all C, so a C compiler is required. Autotools is also + required for `bootstrap` to succeed in generating the configure script + and Makefile templates, `pkg-config` is used by configure, and a `make` + program for executing the build. On Debian systems installing the + "build-essential" meta package should get things at least building + successfully. + + To actually produce a `rototiller` binary usable for rendering visual + output, libsdl2 and/or libdrm development packages will also be needed. + Look at the `../configure` output for SDL and DRM lines to see which have + been enabled. If both report "no" then the build will only produce a + libtil library for potential use in other frontends, with no rototiller + binary for the included CLI frontend. + + After successfully building rototiller with the CLI frontend, an + executable will be at "src/rototiller" in the build tree. If the steps + above were followed verbatim, that would be at `build/src/rototiller`. + + + Quickly testing modules via the CLI frontend: + + The included frontend supports both an interactive stdio-style setup + and specifying those same settings via commandline arguments. If run + without any arguments, i.e. just running `build/src/rototiller`, a + comprehensive interactive setup will be performed for determining both + module and video settings. + + Prior to actually proceeding with a given setup, the configured setup + about to be used is always printed on stdout as valid commandline + argument syntax. This may be copied and reused for an automated + non-interactive startup using those settings. + + One can also partially specify any setup in the commandline arguments, + resulting in an interactive setup for just the unspecified settings. + When developing a new module it's common to specify the video settings, + and just the module name under development, leaving the module's + settings for interactive specification during the experimentation + process. i.e.: + + $ build/src/rototiller --module=newmodule --video=sdl,fullscreen=off,size=640x480 + + This way, if "newmodule" implements settings, only those unspecified + will be asked for interactively. + + + The render function, a bare minimum module: + + All rendering in rototiller is performed using the CPU, in 24-bit "True + color" pixel format, with 32-bits/4-bytes of space used per pixel. + + The surface for rendering into is described using a display system + agnostic "framebuffer fragment" structure type named + "til_fb_fragment_t", defined in "src/til_fb.h" as: + + typedef struct til_fb_fragment_t { + uint32_t *buf; /* pointer to the first pixel in the fragment */ + unsigned x, y; /* absolute coordinates of the upper left corner of this fragment */ + unsigned width, height; /* width and height of this fragment */ + unsigned frame_width; /* width of the frame this fragment is part of */ + unsigned frame_height; /* height of the frame this fragment is part of */ + unsigned stride; /* number of bytes from the end of one row to the start of the next */ + unsigned pitch; /* number of bytes separating y from y + 1, including any padding */ + unsigned number; /* this fragment's number as produced by fragmenting */ + unsigned zeroed:1; /* if this fragment has been zeroed since last flip */ + } til_fb_fragment_t; + + For most modules these members are simply used as provided, and + there's no need to manipulate them. For simple non-threaded cases only + the "buf" and "frame_{width,height}" members are required, with "stride" + or "pitch" becoming important for algorithms directly manipulating buf's + memory contents to properly address rows of pixels since fragments may + be discontiguous in buf at row boundaries for a variety of reasons. + + When using threaded rendering, the "{width,height}" members become + important as they describe a fragment's dimensions within the frame being + rendered. + + The module_render() function prototype is declared within the + "til_module_t" struct in "src/til.h" as: + + void (*render_fragment)(void *context, unsigned ticks, unsigned cpu, til_fb_fragment_t *fragment); + + Every module must provide a "til_module_t" instance having at least this + "render_fragment" member initialized to its rendering function. This is + typically done using a global instance named with the module's prefix. + + None of the other function pointer members in "til_module_t" are + required, and the convention is to use designated initialization in + assigning a module's "til_module_t" members ensuring zero-initialization + of omitted members, i.e.: + + static void minimal_render_fragment(void *context, unsigned ticks, unsigned cpu, til_fb_fragment_t *fragment) + { + /* render into fragment->buf */ + } + + til_module_t minimal_module = { + .render_fragment = minimal_render_fragment, + .name = "minimal", + .description = "Minimal example module", + } + + Note that the render_fragment() prototype has additional arguments than + just the "til_fb_fragment_t *fragment": + + void *context: + + For modules implementing a create_context() function, this will be + the pointer returned by that function. Intended for modules that + require state persisted across frames rendered. + + unsigned ticks: + + A convenient time-like counter the frontend advances during + operation. Instead of calling some kind of time function in every + module which may become costly, "ticks" may be used to represent + time. + + unsigned cpu: + + An identifier representing which logical CPU # the render function is + executing on. This isn't interesting for simple single-threaded + modules, but when implementing more advanced threaded renderers this + may be useful for indexing per-cpu resources to avoid contention. + + For simple modules these can all be safely ignored, "ticks" does tend + to be useful for even simple modules however. + + Rendering functions shouldn't make assumptions about the contents of + "fragment->buf", in part because rototiller will always use multiple + buffers for rendering which may be recycled in any order. Additionally, + it's possible a given fragment will be further manipulated in composited + scenarios. Consequently it's important that every render_fragment() + function fully render the region described by the fragment. + + There tends to be two classes of rendering algorithms; those that + always produce a substantial color for every pixel available in the + output, and those producing more sparse output resembling an overlay. + + In the latter case it's common to require bulk-clearing the fragment + before the algorithm draws its sparse overlay-like contents onto the + canvas. To facilitate potential compositing of such modules, the + "til_fb_fragment_t" structure contains a "zeroed" member used to indicate + if a given fragment's buf contents have been fully initialized yet for + the current frame. When "zeroed" is already set, the bulk clearing + operation should be skipped, allowing the existing contents to serve as + the logically blank canvas. + + A convenience helper for such modules is provided named + til_fb_fragment_zero(). Simply call this at the start of the + render_fragment() function, and the conditional zeroed vs. non-zeroed + details will be handled automatically. Otherwise see the implementation + in "src/til_fb.h" to see what's appropriate. To clarify, modules + implementing algorithms that naturally always write every pixel in the + fragment may completely ignore this aspect, and need not set the zeroed + member; that's handled automatically. + + + Stateful rendering: + + It's common to require some state persisting from one frame to the + next. Achieving this is a simple matter of providing create_context() + and destroy_context() functions when initializing til_module_t, i.e.: + + typedef struct minimal_context_t { + int stateful_variables; + } minimal_context_t; + + static void * minimal_create_context(unsigned ticks, unsigned n_cpus, void *setup) + { + /* this can include more elaborate initialization of minimal_context_t as needed */ + return calloc(1, sizeof(minimal_context_t)); + } + + static void minimal_destroy_context(void *context) + { + free(context); + } + + static void minimal_render_fragment(void *context, unsigned ticks, unsigned cpu, til_fb_fragment_t *fragment) + { + minimal_context_t *ctxt = context; + + /* render into fragment->buf utilizing/updating ctxt->stateful_variables */ + } + + til_module_t minimal_module = { + .create_context = minimal_create_context, + .destroy_context = minimal_destroy_context, + .render_fragment = minimal_render_fragment, + .name = "minimal", + .description = "Minimal example module", + } + + Note that the create_context() function prototype includes some + arguments: + + unsigned ticks: + + Same as render_fragment; a time-like counter. This is provided to + the create_context() function in the event that some ticks-derived + state must be initialized continuously with the ticks value + subsequently passed to render_fragment(). + This is often ignored. + + unsigned n_cpus: + + This is the number of logical CPUs rototiller is running atop, + which is potentially relevant for threaded renderers. The "unsigned + cpu" parameter supplied to render_fragment() will always be < this + n_cpus value, and the two are intended to complement eachother. When + creating the context, one may allocate per-cpu cache-aligned in + n_cpus quantity. Then the render_fragment() function would address + the per-cpu space using the cpu parameter as an index into the n_cpus + sized allocation. + This is often ignored. + + void *setup: + + For modules implementing runtime-configuration by providing a + setup() function in their til_module_t initializer, this will contain + the pointer returned in res_setup by their setup() function. + Unless implementing runtime configuration, this would be ignored. + + As mentioned above in describing the rendering function, this is + entirely optional. One may create 100% valid modules implementing only + the render_fragment(). + + + Runtime-configurable rendering: + + For myriad reasons ranging from debugging and creative experimentation, + to aesthetic variety, it's important to support runtime configuration of + modules. + + Everything configurable that is potentially interesting to a viewer is + best exposed via runtime settings, as opposed to hidden behind + compile-time constants like #defines or magic numbers in the source. + + It's implied that when adding runtime configuration to a module, it + will also involve stateful rendering as described in the previous + section. This isn't absolutely required, but without an allocated + context to apply the runtime-configuration to, the configuration will be + applied in some global fashion. Any modules to be merged upstream + shouldn't apply their configuration globally if at all avoidable. + + Adding runtime configuration requires implementing a setup() function + for a given module. This setup() function is then provided when + initializing til_module_t. Building upon the previous minimal example + from stateful rendering: + + typedef struct minimal_setup_t { + int foobar; + } minimal_setup_t; + + typedef struct minimal_context_t { + int stateful_variables; + } minimal_context_t; + + static void * minimal_create_context(unsigned ticks, unsigned n_cpus, void *setup) + { + minimal_context_t *ctxt; + + ctxt = calloc(1, sizeof(minimal_context_t)); + if (!ctxt) + return NULL; + + ctxt->stateful_variables = ((minimal_setup_t *)setup)->foobar; + + return ctxt; + } + + static void minimal_destroy_context(void *context) + { + free(context); + } + + static void minimal_render_fragment(void *context, unsigned ticks, unsigned cpu, til_fb_fragment_t *fragment) + { + minimal_context_t *ctxt = context; + + /* render into fragment->buf utilizing/updating ctxt->stateful_variables */ + } + + static int minimal_setup(const til_settings_t *settings, til_setting_t **res_setting, const til_setting_desc_t **res_desc, void **res_setup) + { + const char *values[] = { + "off", + "on", + NULL + }; + const char *foobar; + int r; + + r = til_settings_get_and_describe_value(settings, + &(til_setting_desc_t){ + .name = "Foobar configurable setting", + .key = "foobar", + .regex = "^(off|on)", + .preferred = values[0], + .values = values, + .annotations = NULL + }, + &foobar, + res_setting, + res_desc); + if (r) + return r; + + if (res_setup) { + minimal_setup_t *setup; + + setup = calloc(1, sizeof(*setup)); + if (!setup) + return -ENOMEM; + + if (!strcasecmp(foobar, "on")) + setup->foobar = 1; + + *res_setup = setup; + } + + return 0; + } + + til_module_t minimal_module = { + .create_context = minimal_create_context, + .destroy_context = minimal_destroy_context, + .render_fragment = minimal_render_fragment, + .setup = minimal_setup, + .name = "minimal", + .description = "Minimal example module", + } + + + In the above example a the minimal module now has a "foobar" boolean + style setting supporting the values "on" and "off". It may be specified + at runtime to rototiller (or any other frontend) via the commandline + argument: + + "--module=minimal,foobar=true" + + And if the "foobar=true" setting were omitted from the commandline, in + rototiller's CLI frontend an interactive setup dialog would occur, i.e: + + Foobar configurable setting: + 0: off + 1: on + Enter a value 0-1 [0 (off)]: + + Much can be said on the subject of settings, this introduction should + be enough to get started. Use the existing modules as a reference on how + to implement sttings. The sparkler modules in particular has one of the + more complicated setup() functions involving dependencies where some + settings become expected and described only if others are enabled. + + None of the frontends currently enforce the regex, but it's best to + always populate it with something valid as enforcement will become + implemented at some point in the future. Module authors should be able + to largely assume the input is valid at least in terms of passing the + regex. + + Note how the minimal_setup_t instance returned by setup() in res_setup + is subsequently supplied to minimal_create_context() in its setup + parameter. In the previous Stateful rendering example, this setup + parameter was ignored as it would always be NULL lacking any setup() + function. But here we use it to retrieve the "foobar" value wired up by + the minimal_setup() function supplied for minimal_module.setup. + + + Threaded rendering: + + Rototiller deliberately abstains from utilizing any GPU hardware- + acceleration for rendering. Instead, all rendering is done using the CPU + programmed simply in C, without incurring a bunch of GPU API complexity + like OpenGL/Direct3D or any need manage GPU resources. + + Modern systems tend to have multiple CPU cores, enabling parallel + execution similar to how GPUs employ multiple execution units for + parallel rendering of pixels. With some care and little effort + rototiller modules may exploit these additional CPU resources. + + Rototiller takes care of the low-level minutia surrounding creating + threads and efficiently scheduling rendering across them for every frame. + The way modules integrate into this threaded rendering machinery is by + implementing a prepare_frame() function that gets called at the start of + every frame in a single-threaded fashion, followed by parallel execution + of the module's render_fragment() function from potentially many threads. + + The prepare_frame() function prototype is declared within the + "til_module_t" struct in "src/til.h" as: + + void (*prepare_frame)(void *context, unsigned ticks, unsigned n_cpus, til_fb_fragment_t *fragment, til_fragmenter_t *res_fragmenter); + + The context, ticks, n_cpus, and fragment parameters here are + semantically identical to their use in the other til_module_t + functions explained previously in this document. + + What's special here is the res_fragmenter parameter. This is where + your module is expected to provide a fragmenter function rototiller will + call repeatedly while splitting up the frame's fragment being rendered + into smaller subfragments for passing to the module's render_fragment() + in place of the larger frame's fragment. + + This effectively gives modules control over the order, quantity, size, + and shape, of individually rendered subfragments. Logically speaking, + one may view the fragments described by the fragmenter function returned + in res_fragmenter as the potentially parallel units of work dispatched to + the rendering threads. + + The fragmenter function's prototype is declared in the + "til_fragmenter_t" typedef, also in "src/til.h": + + typedef int (*til_fragmenter_t)(void *context, const til_fb_fragment_t *fragment, unsigned number, til_fb_fragment_t *res_fragment); + + While rototiller renders a frame using the provided fragmenter, it + repeatedly calls the fragmenter with an increasing number parameter until + the fragmenter returns 0. The fragmenter is expected to return 1 when it + describes another fragment for the supplied number in *res_fragment. For + a given frame being rendered this way, the context and fragment + parameters will be uniform throughout the frame. The produced fragment + in *res_fragment is expected to describe a subset of the provided + fragment. + + Some rudimentary fragmenting helpers have been provided in + "src/til_fb.[ch]": + + int til_fb_fragment_slice_single(const til_fb_fragment_t *fragment, unsigned n_fragments, unsigned num, til_fb_fragment_t *res_fragment); + int til_fb_fragment_tile_single(const til_fb_fragment_t *fragment, unsigned tile_size, unsigned num, til_fb_fragment_t *res_fragment); + + It's common for threaded modules to simply call one of these in their + fragmenter function, i.e. in the "ray" module: + + static int ray_fragmenter(void *context, const til_fb_fragment_t *fragment, unsigned number, til_fb_fragment_t *res_fragment) + { + return til_fb_fragment_tile_single(fragment, 64, number, res_fragment); + } + + This results in tiling the frame into 64x64 tiles which are then passed + to the module's render_fragment(). The other helper, + til_fb_fragment_slice_single(), instead slices up the input fragment into + n_fragments horizontal slices. Which is preferable depends on the + rendering algorithm. Use of these helpers is optional and provided just + for convenience, modules are free to do whatever they wish here. + + Building upon the first minimal example from above, here's an example + adding threaded (tiled) rendering: + + static int minimal_fragmenter(void *context, const til_fb_fragment_t *fragment, unsigned number, til_fb_fragment_t *res_fragment) + { + return til_fb_fragment_tile_single(fragment, 64, number, res_fragment); + } + + static void minimal_prepare_frame)(void *context, unsigned ticks, unsigned n_cpus, til_fb_fragment_t *fragment, til_fragmenter_t *res_fragmenter) + { + *res_fragmenter = minimal_fragmenter; + } + + static void minimal_render_fragment(void *context, unsigned ticks, unsigned cpu, til_fb_fragment_t *fragment) + { + /* render into fragment->buf, which will be a 64x64 tile within the frame (modulo clipping) */ + + /* Note: + * fragment->frame_{width,height} reflect the dimensions of the + * whole-frame fragment provided to prepare_frame() + * + * fragment->{x,y,width,height} describe this fragment's tile + * within the frame, which fragment->buf points at the upper left + * corner of. + */ + } + + til_module_t minimal_module = { + .prepare_frame = minimal_prepare_frame, + .render_fragment = minimal_render_fragment, + .name = "minimal", + .description = "Minimal threaded example module", + } + + + That's all one must do to achieve threaded rendering. Note however + this places new constraints on what's safe to do from within the module's + render_fragment() function. + + When using threaded rendering, any varying state accessed via + render_fragment() must either be thread-local or synchronized using a + mutex or atomic intrinsics. For performance reasons, the thread-local + option is strongly preferred, as it avoids the need for any atomics. + + Both the create_context() and prepare_frame() functions receive an + n_cpus parameter primarily for the purpose of preparing + per-thread/per-cpu resources that may then be trivially indexed using the + cpu parameter supplied to render_fragment(). When preparing such + per-thread resources, care must be taken to avoid sharing of cache + lines. A trivial (though wasteful) way to achieve this is to simply + page-align the per-cpu allocation. With more intimate knowledge of the + cache line size (64 bytes is very common), one can be more frugal. See + the "snow" module for an example of using per-cpu state for lockless + threaded stateful rendering. -- cgit v1.2.3