summaryrefslogtreecommitdiff
path: root/src/modules/strobe/strobe.c
AgeCommit message (Collapse)Author
2023-07-28modules/*: use til_fragmenter_slice_per_cpu_x16() where applicableVito Caputo
Mechanical change switching til_fragmenter_slice_per_cpu() users over to til_fragmenter_slice_per_cpu_x16(), except sparkler where it's quite detrimental to performance.
2023-05-30til,*: pivot to til_setup_t for context pathsVito Caputo
This changes til_setup_t* from optional to required for til_module_context_t creation, while dropping the separate path parameter construction and passing throughout.
2023-05-28til_setup,*: note settings path in til_setup_tVito Caputo
This commit adds passing the settings instance to til_setup_new() which is used for deriving a path for the setup via til_settings_print_path() on the supplied settings. That path gets an allocated copy left in the returned til_setup_t at til_setup_t.path This path will exist for the lifetime of the til_setup_t, to be freed along with the rest of the baked setup instance when the refcount reaches 0. The incoming til_settings_t is only read @ til_setup_new() in constructing the path, no reference is kept. Basically the til_settings_t* is just passed in for convenience reasons, since constructing the path needs memory and may fail, this approach lets the existing til_setup_new() call error handling also capture the path allocation failures as-is turning til_setup_new() into a bit more of a convenience helper. Note that now all code may assume a til_setup_t has a set and valid til_setup_t.path, which should be useful for context creates when a setup is available.
2023-05-28*: use NULL for free() in til_setup_new()Vito Caputo
Commit 7c8086020 switched the til_setup_new() api to support NULL free_func for free(). This mechanical change pivots to that instead of the awkwardly cast free() parameters.
2023-05-11modules/*: stop storing setup by value in contextsVito Caputo
With setup refcounting and a reference bound to the context, we should just dereference the single instance. The way setups are used it just as a read-only thing to affect context behavior... Note I've left the module-type-specific setup pointer despite it duplicating the setup pointer in the module_context. This is just a convenience thing so the accessors don't have to cast the general til_setup_t* to my_module_setup_t* everywhere.
2023-05-11til_module_context: reference setup from module contextVito Caputo
This just does the obvious pulling in of til_setup_t, holding the reference throughout the lifetime of the module context.
2023-05-11modules/*: remove use of static default setupsVito Caputo
There was a time when it made sense for context creates needing setups but not receiving them to still be functional with some sane defaults. But with recursive settings, we really shouldn't ever have orphaned nested module uses unreachable by a proper setup. So let's just get rid of this fallback, and exclusively rely on the baked setups provided by the .setup() methods. They still have preferred defaults, and the proper setup production machinery is what should be responsible for applying those at runtime where they may also be overridden or otherwise influenced.
2023-05-11til_settings: introduce til_setting_spec_t concept vs. descVito Caputo
For recursive settings the individual setting being described needs to get added to a potentially different settings instance than the one being operated on at the top of the current setup_func phase. The settings instance being passed around for a setup_func to operate on is constified, mainly to try ensure modules don't start directly mucking with the settings. They're supposed to just describe what they want next and iterate back and forth, with the front-end creating the settings from the returned descs however is appropriate, eventually building up the settings to completion. But since it's the setup_func that decides which settings instance is appropriate for containing the setting.. at some point it must associate a settings instance with the desc it's producing, one that is going to be necessarily written to. So here I'm just turning the existing til_setting_desc_t to a "spec", unchanged. And introducing a new til_setting_desc_t embedding the spec, accompanied by a non-const til_settings_t* "container". Now what setup_funcs use to express settings are a spec, otherwise identically to before. Instead of cloning a desc to allocate it for returning to the front-end, the desc is created from a spec with the target settings instance passed in. This turns the desc step where we take a constified settings instance and cast it into a non-const a more formal act of going from spec->desc, binding the spec to a specific settings instance. It will also serve to isolate that hacky cast to a til_settings function, and all the accessors of til_setting_desc_t needing to operate on the containing settings instance can just do so. As of this commit, the container pointer is just sitting in the desc_t but isn't being made use of or even assigned yet. This is just to minimize the amount of churn happening in this otherwise mostly mechanical and sprawling commit. There's also been some small changes surrounding the desc generators and plumbing of the settings instance where there previously wasn't any. It's unclear to me if desc generators will stay desc generators or turn into spec generators. For now those are mostly just used by the drm_fb stuff anyways, modules haven't made use of them, so they can stay a little crufty harmlessly for now.
2023-01-20til: pass module to .context_create()/til_module_context_new()Vito Caputo
Let's make it so til_module_context_t as returned from til_module_context_new() can immediately be freed via til_module_context_free(). Previously it was only after the context propagated out to til_module_context_create() that it could be freed that way, as that was where the module member was being assigned. With this change, and wiring up the module pointer into til_module_t.create_context() as well for convenient providing to til_module_context_new(), til_module_t.create_context() error paths can easily cleanup via `return til_module_context_free()` But this does require the til_module_t.destroy_context() be able to safely handle partially constructed contexts, since the mid-create failure freeing won't necessarily have all the members initialized. There will probably be some NULL derefs to fix up, but at least the contexts are zero-initialized @ new.
2023-01-11* turn til_fb_fragment_t.stream into a discrete parameterVito Caputo
This was mostly done out of convenience at the expense of turning the fragment struct into more of a junk drawer. But properly cleaning up owned stream pipes on context destroy makes the inappropriateness of being part of til_fb_fragment_t glaringly apparent. Now the stream is just a separate thing passed to context create, with a reference kept in the context for use throughout. Cleanup of the owned pipes on the stream supplied to context create is automagic when the context gets destroyed. Note that despite there being a stream in the module context, the stream to use is still supplied to all the rendering family functions (prepare/render/finish) and it's the passed-in stream which should be used by these functions. This is done to support the possibility of switching out the stream frame-to-frame, which may be interesting. Imagine doing things like a latent stream and a future stream and switching between them on the fly for instance. If there's a sequencing composite module, it could flip between multiple sets of tracks or jump around multiple streams with the visuals immediately flipping accordingly. This should fix the --print-pipes crashing issues caused by lack of cleanup when contexts were removed (like rtv does so often).
2023-01-10*: introduce paths for module contextsVito Caputo
There needs to be a way to address module context instances by name externally, in a manner complementary to settings and taps. This commit adds a string-based path to til_module_context_t, and modifies til_module_create_context() to accept a parent path which is then concatenated with the name of the module to produce the module instance's new path. The name separator used in the paths is '/' just like filesystem paths, but these paths have no relationship to filesystems or files. The root module context creation in rototiller's main simply passes "" as the parent path, resulting in a "/" root as one would expect. There are some obvious complications introduced here however: - checkers in particular creates a context per cpu, simply using the same seed and setup to try make the contexts identical at the same ticks value. With this commit I'm simply passing the incoming path as the parent for creating those contexts, but it's unclear to me if that will work OK. With an eye towards taps deriving their parent path from the context path, I guess these taps would all get the same parent and hash to the same value despite being duplicated. Maybe it Just Works, but one thing is clear - there won't be any way to address the per-cpu taps as-is. Maybe that's desirable though, there's probably not much use in trying to control the taps at the CPU granularity. - when the recursive settings stuff lands, it should bring along the ability to explicitly name settings blocks. Those names should override the module name in constructing the path. I've noted as such in the code. - these paths probably need to be hashed @ initialization time so there needs to be a hash function added to til, and a hash value accompanying the name in the module context. It'd be dumb to keep recomputing the hash when these paths get used for hash table lookups multiple times per frame... there's probably more I'm forgetting right now, but this seems like a good first step. fixup root path
2022-11-09modules/strobe: force flash even at low FPSPhilip J Freeman
At low framerates, the strobe module timer can expire from frame to frame. This has the effect of appearing "always on." This condition was obscuring output in compose mode. #BirdwalkCommit #WinterStormWarning
2022-09-04modules/strobe: add rudimentary strobe light moduleVito Caputo
After reading about the Dreamachine[0], I wanted to experience this phenomenon. The javascript-based web implementations struggled to hold a steady 10Hz rate and would flicker like crazy, so here we are. Only setting right now is period=float_seconds, defaults to .1 for 10Hz. One limitation in the current implementation is when the frame rate can't keep up with the period the strobe will just stick on without ever going off, because the period will always be expired. There should probably be a setting to force turning off for at least one frame when it can't keep up. [0] https://en.wikipedia.org/wiki/Dreamachine
© All Rights Reserved